


----------------- --------------- -----------
| | TCP/IP | | TCP/IP | |
| LM
Simulator | <----------> | yaAGC | <----------> | yaACA |
| | | | | |
----------------- --------------- -----------
| --port=PortNum | Changes the port number (by default, 19801) used to connect to yaAGC. This can also be changed in the configuration file. |
| --cfg=IniFilename | This option changes the name or directory of the configuration-file used. By default, the file is "lm_simulator.ini", located in the installation directory. |
| Menu | Function |
|---|---|
| Edit -> Clear Message Window | Clears the Log Window |
| Edit -> Exit | Leaves the Program |
| Systems -> DSKY Lite | Display/Keyboard interface |
| Systems -> AGC Outputs | Monitoring and Correlating of the AGC Binary Outputs |
| Systems -> AGC LM System Input | Simulation of all binary AGC input values |
| Systems -> AGC Crew Inputs | Crew switches, buttons, RHC/ACA, THC connected to the AGC |
| Systems -> FDAI / IMU | Flight Director Attitude Indicator which shows the LM attitude in relation to the Inertial Measurement Unit |
| Systems -> Simulation Monitor & Control | Monitor simulation parameter like thrust and amount of propellant and control the Descent- and Ascent-Engine as well as the stage separation. |
| Info -> Help | An application overview |
| Info -> Tutorial | Explanation of some procedures like IMU initialization |
| Info -> Verbs & Nouns | A list of the available verbs & nouns to use the AGC |
| Info -> Alarm Codes | An overview of AGC alarm codes |
| Info -> About | Author, Version etc. |
| Info -> License | The license model of LM-Simulator |
| 0.0 | Fast Start |
| 0.1 | AGC/LGC Initialization |
| 1.0 | IMU Introduction |
| 1.1 | IMU Start |
| 1.2 | IMU Pre-flight Checkout |
| 1.3 | IMU Coarse Align |
| 1.4 | IMU Fine Align |
| 1.5 | Zero IMU |
| 1.6 | Monitor Gimbal Angles |
| 1.7 | Monitor PIPA Counter Values |
| 2.0 | DAP (Digital Autopilot) Data Initialization |
| 2.1 | DAP Activation and Modes |
| 2.2 | DAP - V49 Crew Defined Maneuver |
| 2.3 | DAP - FDAI Error Needle Modes |
| 3.0 | Show Alarm Codes & Data |
| 4.0 | Useful Verbs & Nouns |
| A = 1 | Ascent Stage Only |
| A = 2 | Ascent and Descent Stage |
| A = 3 | Ascent and Descent Stages docked with CSM |
| B = 0 | 2 Jet Translation RCS System A |
| B = 1 | 2 Jet Translation RCS System B |
| B = 2 | 4 Jet Translation RCS System A |
| B = 3 | 4 Jet Translation RCS System B |
| C = 0 | Fine Scaling ACA (4 Deg/Sec) |
| C = 1 | Normal Scaling ACA (20 Deg/Sec) |
| D = 0 | ATT Deadband 0.3 Degrees |
| D = 1 | ATT Deadband 1.0 Degrees |
| D = 2 | ATT Deadband 5.0 Degrees |
| E = 0 | 0.2 Deg/Sec |
| E = 1 | 0.5 Deg/Sec |
| E = 2 | 2 Deg/Sec |
| E = 3 | 10 Deg/Sec |
| DSKY | Function |
|---|---|
| V35E | Lamp Test |
| V36E | AGC Reset |
| V34E | Terminate an ongoing function like IMU Angle Monitoring (V16N20E) |
| V16N36E | Monitor the AGC time (R1=Hours; R2=Minutes; R3=100ths of a Second) |
| V37E | Changes the AGC Program (e.g. V37E00E = Idling Program) |