ELS Howto: Title


Synopsis

Give a brief description of what the document will allow you to accomplish.


Prerequisites

Give a description of what must be in place for this procedure to be successful including any software that is not part of the base ELS installation. If there are more than two items consider making them a bulleted list.


Installation

Describe, in general terms, what it takes to get this installed. Give a list of installation steps below. Do not use command names here (e.g. change to the /etc directory is okay, but cd /etc is not.) Also, do not refer to any specific path unless it will be the same on every system (e.g. /proc/partitions is okay, but /home/jsmith is not.)

  1. Step One
  2. Step Two
  3. Step Three

Example

Describe how you might carry out the steps above. Using specific path names in examples is okay.

Give a sample of the specific commands that might be entered at the console to
carry out the installation instructions above.

Configuration

Give some steps to take for configuring.

  1. Step One
  2. Step Two
  3. Step Three

Example

Describe how you might carry out the steps above using specific path names.

Give a sample of the specific commands that might be entered at the console to
carry out the configuration instructions above.

Testing

Give some steps to take for testing to ensure successful installation.

  1. Step One
  2. Step Two
  3. Step Three

Give some steps to resolve problems that may have been uncovered during testing.

  1. Step One
  2. Step One
  3. Step One

If there are additional resources for help (e.g. product web site, mailing lists) mention them here.