dlpsh  - command shell for executing DLP commands to a USR
       Pilot


SYNOPSIS

       dlpsh /dev/cua?


DESCRIPTION

       This manual page documents the  small  application  dlpsh.
       dlpsh  allows  the  user to connect to a Pilot and execute
       arbitrary Data Link Protocol (DLP)  commands  to  a  Pilot
       connected  to the specified callout device.  Once dlpsh is
       started, the  user  must  invoke  HotSync  on  the  target
       device.   Once  connected, the user may execute any of the
       built-in DLP commands. (See BUILT-IN COMMANDS).  The  con­
       nection  to the Pilot is kept alive by sending a PadTickle
       packet to the Pilot after a small period of  non-activity.
       (7 seconds by default)

   BUILT-IN COMMANDS
       user [-n username] [-i user id] [-v viewer id] [-p pc id]

   OPTIONS
       none


USEAGE

       The  program will connect to a target, and give the user a
       prompt for executing commands.


BUGS

       dlpsh has no known bugs.


AUTHOR

       dlpsh was written by Chris Stevens and Damien Neil


Man(1) output converted with man2html