perlop - Perl operators and precedence


SYNOPSIS

       Perl operators have the following associativity and prece­
       dence, listed from highest precedence to lowest.  Opera­
       tors borrowed from C keep the same precedence relationship
       with each other, even where C's precedence is slightly
       screwy.  (This makes learning Perl easier for C folks.)
       With very few exceptions, these all operate on scalar val­
       ues only, not array values.

           left        terms and list operators (leftward)
           left        ->
           nonassoc    ++ --
           right       **
           right       ! ~ \ and unary + and -
           left        =~ !~
           left        * / % x
           left        + - .
           left        << >>
           nonassoc    named unary operators
           nonassoc    < > <= >= lt gt le ge
           nonassoc    == != <=> eq ne cmp
           left        &
           left        | ^
           left        &&
           left        ||
           nonassoc    ..  ...
           right       ?:
           right       = += -= *= etc.
           left        , =>
           nonassoc    list operators (rightward)
           right       not
           left        and
           left        or xor

       In the following sections, these operators are covered in
       precedence order.

       Many operators can be overloaded for objects.  See the
       overload manpage.


DESCRIPTION

       Terms and List Operators (Leftward)

       A TERM has the highest precedence in Perl.  They include
       variables, quote and quote-like operators, any expression
       in parentheses, and any function whose arguments are
       parenthesized.  Actually, there aren't really functions in
       this sense, just list operators and unary operators behav­
       ing as functions because you put parentheses around the
       arguments.  These are all documented in the perlfunc man­
       page.

       (chdir(), etc.)  is followed by a left parenthesis as the
       next token, the operator and arguments within parentheses
       are taken to be of highest precedence, just like a normal
       function call.

       In the absence of parentheses, the precedence of list
       operators such as `print', `sort', or `chmod' is either
       very high or very low depending on whether you are looking
       at the left side or the right side of the operator.  For
       example, in

           @ary = (1, 3, sort 4, 2);
           print @ary;         # prints 1324

       the commas on the right of the sort are evaluated before
       the sort, but the commas on the left are evaluated after.
       In other words, list operators tend to gobble up all argu­
       ments that follow, and then act like a simple TERM with
       regard to the preceding expression.  Be careful with
       parentheses:

           # These evaluate exit before doing the print:
           print($foo, exit);  # Obviously not what you want.
           print $foo, exit;   # Nor is this.

           # These do the print before evaluating exit:
           (print $foo), exit; # This is what you want.
           print($foo), exit;  # Or this.
           print ($foo), exit; # Or even this.

       Also note that

           print ($foo & 255) + 1, "\n";

       probably doesn't do what you expect at first glance.  See
       the Named Unary Operators entry elsewhere in this document
       for more discussion of this.

       Also parsed as terms are the `do {}' and `eval {}' con­
       structs, as well as subroutine and method calls, and the
       anonymous constructors `[]' and `{}'.

       See also the Quote and Quote-like Operators entry else­
       where in this document toward the end of this section, as
       well as the section on "I/O Operators".

       The Arrow Operator

       "`->'" is an infix dereference operator, just as it is in
       C and C++.  If the right side is either a `[...]',
       `{...}', or a `(...)' subscript, then the left side must
       be either a hard or symbolic reference to an array, a
       hash, or a subroutine respectively.  (Or technically

       if it's an array or hash reference being used for assign­
       ment.)  See the perlreftut manpage and the perlref man­
       page.

       Otherwise, the right side is a method name or a simple
       scalar variable containing either the method name or a
       subroutine reference, and the left side must be either an
       object (a blessed reference) or a class name (that is, a
       package name).  See the perlobj manpage.

       Auto-increment and Auto-decrement

       "++" and "--" work as in C.  That is, if placed before a
       variable, they increment or decrement the variable before
       returning the value, and if placed after, increment or
       decrement the variable after returning the value.

       The auto-increment operator has a little extra builtin
       magic to it.  If you increment a variable that is numeric,
       or that has ever been used in a numeric context, you get a
       normal increment.  If, however, the variable has been used
       in only string contexts since it was set, and has a value
       that is not the empty string and matches the pattern
       `/^[a-zA-Z]*[0-9]*$/', the increment is done as a string,
       preserving each character within its range, with carry:

           print ++($foo = '99');      # prints '100'
           print ++($foo = 'a0');      # prints 'a1'
           print ++($foo = 'Az');      # prints 'Ba'
           print ++($foo = 'zz');      # prints 'aaa'

       The auto-decrement operator is not magical.

       Exponentiation

       Binary "**" is the exponentiation operator.  It binds even
       more tightly than unary minus, so -2**4 is -(2**4), not
       (-2)**4. (This is implemented using C's pow(3) function,
       which actually works on doubles internally.)

       Symbolic Unary Operators

       Unary "!" performs logical negation, i.e., "not".  See
       also `not' for a lower precedence version of this.

       Unary "-" performs arithmetic negation if the operand is
       numeric.  If the operand is an identifier, a string con­
       sisting of a minus sign concatenated with the identifier
       is returned.  Otherwise, if the string starts with a plus
       or minus, a string starting with the opposite sign is
       returned.  One effect of these rules is that `-bareword'
       is equivalent to `"-bareword"'.

       For example, `0666 & ~027' is 0640.  (See also the Integer
       Arithmetic entry elsewhere in this document and the Bit­
       wise String Operators entry elsewhere in this document.)
       Note that the width of the result is platform-dependent:
       ~0 is 32 bits wide on a 32-bit platform, but 64 bits wide
       on a 64-bit platform, so if you are expecting a certain
       bit width, remember use the & operator to mask off the
       excess bits.

       Unary "+" has no effect whatsoever, even on strings.  It
       is useful syntactically for separating a function name
       from a parenthesized expression that would otherwise be
       interpreted as the complete list of function arguments.
       (See examples above under the Terms and List Operators
       (Leftward) entry elsewhere in this document.)

       Unary "\" creates a reference to whatever follows it.  See
       the perlreftut manpage and the perlref manpage.  Do not
       confuse this behavior with the behavior of backslash
       within a string, although both forms do convey the notion
       of protecting the next thing from interpolation.

       Binding Operators

       Binary "=~" binds a scalar expression to a pattern match.
       Certain operations search or modify the string $_ by
       default.  This operator makes that kind of operation work
       on some other string.  The right argument is a search pat­
       tern, substitution, or transliteration.  The left argument
       is what is supposed to be searched, substituted, or
       transliterated instead of the default $_.  When used in
       scalar context, the return value generally indicates the
       success of the operation.  Behavior in list context
       depends on the particular operator.  See the Regexp Quote-
       Like Operators entry elsewhere in this document for
       details.

       If the right argument is an expression rather than a
       search pattern, substitution, or transliteration, it is
       interpreted as a search pattern at run time.  This can be
       less efficient than an explicit search, because the pat­
       tern must be compiled every time the expression is evalu­
       ated.

       Binary "!~" is just like "=~" except the return value is
       negated in the logical sense.

       Multiplicative Operators

       Binary "*" multiplies two numbers.

       Binary "/" divides two numbers.

       integer operands `$a' and `$b': If `$b' is positive, then
       `$a % $b' is `$a' minus the largest multiple of `$b' that
       is not greater than `$a'.  If `$b' is negative, then `$a %
       $b' is `$a' minus the smallest multiple of `$b' that is
       not less than `$a' (i.e. the result will be less than or
       equal to zero).  Note than when `use integer' is in scope,
       "%" give you direct access to the modulus operator as
       implemented by your C compiler.  This operator is not as
       well defined for negative operands, but it will execute
       faster.

       Binary "x" is the repetition operator.  In scalar context
       or if the left operand is not enclosed in parentheses, it
       returns a string consisting of the left operand repeated
       the number of times specified by the right operand.  In
       list context, if the left operand is enclosed in parenthe­
       ses, it repeats the list.

           print '-' x 80;             # print row of dashes

           print "\t" x ($tab/8), ' ' x ($tab%8);      # tab over

           @ones = (1) x 80;           # a list of 80 1's
           @ones = (5) x @ones;        # set all elements to 5

       Additive Operators

       Binary "+" returns the sum of two numbers.

       Binary "-" returns the difference of two numbers.

       Binary "." concatenates two strings.

       Shift Operators

       Binary "<<" returns the value of its left argument shifted
       left by the number of bits specified by the right argu­
       ment.  Arguments should be integers.  (See also the Inte­
       ger Arithmetic entry elsewhere in this document.)

       Binary ">>" returns the value of its left argument shifted
       right by the number of bits specified by the right argu­
       ment.  Arguments should be integers.  (See also the Inte­
       ger Arithmetic entry elsewhere in this document.)

       Named Unary Operators

       The various named unary operators are treated as functions
       with one argument, with optional parentheses.  These
       include the filetest operators, like `-f', `-M', etc.  See
       the perlfunc manpage.

       (chdir(), etc.)  is followed by a left parenthesis as the
       next token, the operator and arguments within parentheses
       are taken to be of highest precedence, just like a normal
       function call.  Examples:

           chdir $foo    || die;       # (chdir $foo) || die
           chdir($foo)   || die;       # (chdir $foo) || die
           chdir ($foo)  || die;       # (chdir $foo) || die
           chdir +($foo) || die;       # (chdir $foo) || die

       but, because * is higher precedence than ||:

           chdir $foo * 20;    # chdir ($foo * 20)
           chdir($foo) * 20;   # (chdir $foo) * 20
           chdir ($foo) * 20;  # (chdir $foo) * 20
           chdir +($foo) * 20; # chdir ($foo * 20)

           rand 10 * 20;       # rand (10 * 20)
           rand(10) * 20;      # (rand 10) * 20
           rand (10) * 20;     # (rand 10) * 20
           rand +(10) * 20;    # rand (10 * 20)

       See also the section on "Terms and List Operators (Left­
       ward)".

       Relational Operators

       Binary "<" returns true if the left argument is numeri­
       cally less than the right argument.

       Binary ">" returns true if the left argument is numeri­
       cally greater than the right argument.

       Binary "<=" returns true if the left argument is numeri­
       cally less than or equal to the right argument.

       Binary ">=" returns true if the left argument is numeri­
       cally greater than or equal to the right argument.

       Binary "lt" returns true if the left argument is string­
       wise less than the right argument.

       Binary "gt" returns true if the left argument is string­
       wise greater than the right argument.

       Binary "le" returns true if the left argument is string­
       wise less than or equal to the right argument.

       Binary "ge" returns true if the left argument is string­
       wise greater than or equal to the right argument.


       Binary "==" returns true if the left argument is numeri­
       cally equal to the right argument.

       Binary "!=" returns true if the left argument is numeri­
       cally not equal to the right argument.

       Binary "<=>" returns -1, 0, or 1 depending on whether the
       left argument is numerically less than, equal to, or
       greater than the right argument.

       Binary "eq" returns true if the left argument is string­
       wise equal to the right argument.

       Binary "ne" returns true if the left argument is string­
       wise not equal to the right argument.

       Binary "cmp" returns -1, 0, or 1 depending on whether the
       left argument is stringwise less than, equal to, or
       greater than the right argument.

       "lt", "le", "ge", "gt" and "cmp" use the collation (sort)
       order specified by the current locale if `use locale' is
       in effect.  See the perllocale manpage.

       Bitwise And

       Binary "&" returns its operators ANDed together bit by
       bit.  (See also the Integer Arithmetic entry elsewhere in
       this document and the Bitwise String Operators entry else­
       where in this document.)

       Bitwise Or and Exclusive Or

       Binary "|" returns its operators ORed together bit by bit.
       (See also the Integer Arithmetic entry elsewhere in this
       document and the Bitwise String Operators entry elsewhere
       in this document.)

       Binary "^" returns its operators XORed together bit by
       bit.  (See also the Integer Arithmetic entry elsewhere in
       this document and the Bitwise String Operators entry else­
       where in this document.)

       C-style Logical And

       Binary "&&" performs a short-circuit logical AND opera­
       tion.  That is, if the left operand is false, the right
       operand is not even evaluated.  Scalar or list context
       propagates down to the right operand if it is evaluated.


       Binary "||" performs a short-circuit logical OR operation.
       That is, if the left operand is true, the right operand is
       not even evaluated.  Scalar or list context propagates
       down to the right operand if it is evaluated.

       The `||' and `&&' operators differ from C's in that,
       rather than returning 0 or 1, they return the last value
       evaluated.  Thus, a reasonably portable way to find out
       the home directory (assuming it's not "0") might be:

           $home = $ENV{'HOME'} || $ENV{'LOGDIR'} ||
               (getpwuid($<))[7] || die "You're homeless!\n";

       In particular, this means that you shouldn't use this for
       selecting between two aggregates for assignment:

           @a = @b || @c;              # this is wrong
           @a = scalar(@b) || @c;      # really meant this
           @a = @b ? @b : @c;          # this works fine, though

       As more readable alternatives to `&&' and `||' when used
       for control flow, Perl provides `and' and `or' operators
       (see below).  The short-circuit behavior is identical.
       The precedence of "and" and "or" is much lower, however,
       so that you can safely use them after a list operator
       without the need for parentheses:

           unlink "alpha", "beta", "gamma"
                   or gripe(), next LINE;

       With the C-style operators that would have been written
       like this:

           unlink("alpha", "beta", "gamma")
                   || (gripe(), next LINE);

       Using "or" for assignment is unlikely to do what you want;
       see below.

       Range Operators

       Binary ".." is the range operator, which is really two
       different operators depending on the context.  In list
       context, it returns an array of values counting (up by
       ones) from the left value to the right value.  If the left
       value is greater than the right value then it returns the
       empty array.  The range operator is useful for writing
       `foreach (1..10)' loops and for doing slice operations on
       arrays.  In the current implementation, no temporary array
       is created when the range operator is used as the expres­
       sion in `foreach' loops, but older versions of Perl might
       burn a lot of memory when you write something like this:

               # code
           }

       In scalar context, ".." returns a boolean value.  The
       operator is bistable, like a flip-flop, and emulates the
       line-range (comma) operator of sed, awk, and various edi­
       tors.  Each ".." operator maintains its own boolean state.
       It is false as long as its left operand is false.  Once
       the left operand is true, the range operator stays true
       until the right operand is true, AFTER which the range
       operator becomes false again.  It doesn't become false
       till the next time the range operator is evaluated.  It
       can test the right operand and become false on the same
       evaluation it became true (as in awk), but it still
       returns true once.  If you don't want it to test the right
       operand till the next evaluation, as in sed, just use
       three dots ("...") instead of two.  In all other regards,
       "..." behaves just like ".." does.

       The right operand is not evaluated while the operator is
       in the "false" state, and the left operand is not evalu­
       ated while the operator is in the "true" state.  The
       precedence is a little lower than || and &&.  The value
       returned is either the empty string for false, or a
       sequence number (beginning with 1) for true.  The sequence
       number is reset for each range encountered.  The final
       sequence number in a range has the string "E0" appended to
       it, which doesn't affect its numeric value, but gives you
       something to search for if you want to exclude the end­
       point.  You can exclude the beginning point by waiting for
       the sequence number to be greater than 1.  If either
       operand of scalar ".." is a constant expression, that
       operand is implicitly compared to the `$.' variable, the
       current line number.  Examples:

       As a scalar operator:

           if (101 .. 200) { print; }  # print 2nd hundred lines
           next line if (1 .. /^$/);   # skip header lines
           s/^/> / if (/^$/ .. eof()); # quote body

           # parse mail messages
           while (<>) {
               $in_header =   1  .. /^$/;
               $in_body   = /^$/ .. eof();
               # do something based on those
           } continue {
               close ARGV if eof;              # reset $. each file
           }

       As a list operator:

           @foo = @foo[0 .. $#foo];    # an expensive no-op
           @foo = @foo[$#foo-4 .. $#foo];      # slice last 5 items

       The range operator (in list context) makes use of the mag­
       ical auto-increment algorithm if the operands are strings.
       You can say

           @alphabet = ('A' .. 'Z');

       to get all normal letters of the alphabet, or

           $hexdigit = (0 .. 9, 'a' .. 'f')[$num & 15];

       to get a hexadecimal digit, or

           @z2 = ('01' .. '31');  print $z2[$mday];

       to get dates with leading zeros.  If the final value spec­
       ified is not in the sequence that the magical increment
       would produce, the sequence goes until the next value
       would be longer than the final value specified.

       Conditional Operator

       Ternary "?:" is the conditional operator, just as in C.
       It works much like an if-then-else.  If the argument
       before the ? is true, the argument before the : is
       returned, otherwise the argument after the : is returned.
       For example:

           printf "I have %d dog%s.\n", $n,
                   ($n == 1) ? '' : "s";

       Scalar or list context propagates downward into the 2nd or
       3rd argument, whichever is selected.

           $a = $ok ? $b : $c;  # get a scalar
           @a = $ok ? @b : @c;  # get an array
           $a = $ok ? @b : @c;  # oops, that's just a count!

       The operator may be assigned to if both the 2nd and 3rd
       arguments are legal lvalues (meaning that you can assign
       to them):

           ($a_or_b ? $a : $b) = $c;

       Because this operator produces an assignable result, using
       assignments without parentheses will get you in trouble.
       For example, this:

           $a % 2 ? $a += 10 : $a += 2

       Really means this:


       Rather than this:

           ($a % 2) ? ($a += 10) : ($a += 2)

       That should probably be written more simply as:

           $a += ($a % 2) ? 10 : 2;

       Assignment Operators

       "=" is the ordinary assignment operator.

       Assignment operators work as in C.  That is,

           $a += 2;

       is equivalent to

           $a = $a + 2;

       although without duplicating any side effects that deref­
       erencing the lvalue might trigger, such as from tie().
       Other assignment operators work similarly.  The following
       are recognized:

           **=    +=    *=    &=    <<=    &&=
                  -=    /=    |=    >>=    ||=
                  .=    %=    ^=
                        x=

       Although these are grouped by family, they all have the
       precedence of assignment.

       Unlike in C, the scalar assignment operator produces a
       valid lvalue.  Modifying an assignment is equivalent to
       doing the assignment and then modifying the variable that
       was assigned to.  This is useful for modifying a copy of
       something, like this:

           ($tmp = $global) =~ tr [A-Z] [a-z];

       Likewise,

           ($a += 2) *= 3;

       is equivalent to

           $a += 2;
           $a *= 3;

       Similarly, a list assignment in list context produces the

       scalar context returns the number of elements produced by
       the expression on the right hand side of the assignment.

       Comma Operator

       Binary "," is the comma operator.  In scalar context it
       evaluates its left argument, throws that value away, then
       evaluates its right argument and returns that value.  This
       is just like C's comma operator.

       In list context, it's just the list argument separator,
       and inserts both its arguments into the list.

       The => digraph is mostly just a synonym for the comma
       operator.  It's useful for documenting arguments that come
       in pairs.  As of release 5.001, it also forces any word to
       the left of it to be interpreted as a string.

       List Operators (Rightward)

       On the right side of a list operator, it has very low
       precedence, such that it controls all comma-separated
       expressions found there.  The only operators with lower
       precedence are the logical operators "and", "or", and
       "not", which may be used to evaluate calls to list opera­
       tors without the need for extra parentheses:

           open HANDLE, "filename"
               or die "Can't open: $!\n";

       See also discussion of list operators in the Terms and
       List Operators (Leftward) entry elsewhere in this docu­
       ment.

       Logical Not

       Unary "not" returns the logical negation of the expression
       to its right.  It's the equivalent of "!" except for the
       very low precedence.

       Logical And

       Binary "and" returns the logical conjunction of the two
       surrounding expressions.  It's equivalent to && except for
       the very low precedence.  This means that it short-cir­
       cuits: i.e., the right expression is evaluated only if the
       left expression is true.

       Logical or and Exclusive Or

       Binary "or" returns the logical disjunction of the two
       surrounding expressions.  It's equivalent to || except for
       the very low precedence.  This makes it useful for control


           print FH $data              or die "Can't write to FH: $!";

       This means that it short-circuits: i.e., the right expres­
       sion is evaluated only if the left expression is false.
       Due to its precedence, you should probably avoid using
       this for assignment, only for control flow.

           $a = $b or $c;              # bug: this is wrong
           ($a = $b) or $c;            # really means this
           $a = $b || $c;              # better written this way

       However, when it's a list-context assignment and you're
       trying to use "||" for control flow, you probably need
       "or" so that the assignment takes higher precedence.

           @info = stat($file) || die;     # oops, scalar sense of stat!
           @info = stat($file) or die;     # better, now @info gets its due

       Then again, you could always use parentheses.

       Binary "xor" returns the exclusive-OR of the two surround­
       ing expressions.  It cannot short circuit, of course.

       C Operators Missing From Perl

       Here is what C has that Perl doesn't:

       unary & Address-of operator.  (But see the "\" operator
               for taking a reference.)

       unary * Dereference-address operator. (Perl's prefix
               dereferencing operators are typed: $, @, %, and
               &.)

       (TYPE)  Type-casting operator.

       Quote and Quote-like Operators

       While we usually think of quotes as literal values, in
       Perl they function as operators, providing various kinds
       of interpolating and pattern matching capabilities.  Perl
       provides customary quote characters for these behaviors,
       but also provides a way for you to choose your quote char­
       acter for any of them.  In the following table, a `{}'
       represents any pair of delimiters you choose.

               ''       q{}          Literal             no
               ""      qq{}          Literal             yes
               ``      qx{}          Command             yes (unless '' is delimiter)
                       qw{}         Word list            no
               //       m{}       Pattern match          yes (unless '' is delimiter)
                       qr{}          Pattern             yes (unless '' is delimiter)
                        s{}{}      Substitution          yes (unless '' is delimiter)
                       tr{}{}    Transliteration         no (but see below)

       Non-bracketing delimiters use the same character fore and
       aft, but the four sorts of brackets (round, angle, square,
       curly) will all nest, which means that

               q{foo{bar}baz}

       is the same as

               'foo{bar}baz'

       Note, however, that this does not always work for quoting
       Perl code:

               $s = q{ if($a eq "}") ... }; # WRONG

       is a syntax error. The `Text::Balanced' module on CPAN is
       able to do this properly.

       There can be whitespace between the operator and the quot­
       ing characters, except when `#' is being used as the quot­
       ing character.  `q#foo#' is parsed as the string `foo',
       while `q #foo#' is the operator `q' followed by a comment.
       Its argument will be taken from the next line.  This
       allows you to write:

           s {foo}  # Replace foo
             {bar}  # with bar.

       For constructs that do interpolate, variables beginning
       with "`$'" or "`@'" are interpolated, as are the following
       escape sequences.  Within a transliteration, the first
       eleven of these sequences may be used.

           \n          newline         (NL)
           \r          return          (CR)
           \f          form feed       (FF)
           \b          backspace       (BS)
           \a          alarm (bell)    (BEL)
           \e          escape          (ESC)
           \033        octal char      (ESC)
           \x1b        hex char        (ESC)
           \x{263a}    wide hex char   (SMILEY)
           \c[         control char    (ESC)
           \N{name}    named char

           \l          lowercase next char
           \u          uppercase next char
           \L          lowercase till \E
           \U          uppercase till \E
           \E          end case modification
           \Q          quote non-word characters till \E

       If `use locale' is in effect, the case map used by `\l',
       `\L', `\u' and `\U' is taken from the current locale.  See
       the perllocale manpage.  For documentation of `\N{name}',
       see the charnames manpage.

       All systems use the virtual `"\n"' to represent a line
       terminator, called a "newline".  There is no such thing as
       an unvarying, physical newline character.  It is only an
       illusion that the operating system, device drivers, C
       libraries, and Perl all conspire to preserve.  Not all
       systems read `"\r"' as ASCII CR and `"\n"' as ASCII LF.
       For example, on a Mac, these are reversed, and on systems
       without line terminator, printing `"\n"' may emit no
       actual data.  In general, use `"\n"' when you mean a "new­
       line" for your system, but use the literal ASCII when you
       need an exact character.  For example, most networking
       protocols expect and prefer a CR+LF (`"\012\015"' or
       `"\cJ\cM"') for line terminators, and although they often
       accept just `"\012"', they seldom tolerate just `"\015"'.
       If you get in the habit of using `"\n"' for networking,
       you may be burned some day.

       You cannot include a literal `$' or `@' within a `\Q'
       sequence.  An unescaped `$' or `@' interpolates the corre­
       sponding variable, while escaping will cause the literal
       string `\$' to be inserted.  You'll need to write some­
       thing like `m/\Quser\E\@\Qhost/'.

       Patterns are subject to an additional level of interpreta­
       tion as a regular expression.  This is done as a second
       pass, after variables are interpolated, so that regular
       expressions may be incorporated into the pattern from the
       variables.  If this is not what you want, use `\Q' to
       interpolate a variable literally.

       expand multiple levels of interpolation.  In particular,
       contrary to the expectations of shell programmers, back-
       quotes do NOT interpolate within double quotes, nor do
       single quotes impede evaluation of variables when used
       within double quotes.

       Regexp Quote-Like Operators

       Here are the quote-like operators that apply to pattern
       matching and related activities.

       ?PATTERN?
               This is just like the `/pattern/' search, except
               that it matches only once between calls to the
               reset() operator.  This is a useful optimization
               when you want to see only the first occurrence of
               something in each file of a set of files, for
               instance.  Only `??'  patterns local to the cur­
               rent package are reset.

                   while (<>) {
                       if (?^$?) {
                                           # blank line between header and body
                       }
                   } continue {
                       reset if eof;       # clear ?? status for next file
                   }

               This usage is vaguely depreciated, which means it
               just might possibly be removed in some distant
               future version of Perl, perhaps somewhere around
               the year 2168.

       m/PATTERN/cgimosx

       /PATTERN/cgimosx
               Searches a string for a pattern match, and in
               scalar context returns true if it succeeds, false
               if it fails.  If no string is specified via the
               `=~' or `!~' operator, the $_ string is searched.
               (The string specified with `=~' need not be an
               lvalue--it may be the result of an expression
               evaluation, but remember the `=~' binds rather
               tightly.)  See also the perlre manpage.  See the
               perllocale manpage for discussion of additional
               considerations that apply when `use locale' is in
               effect.

               Options are:

                   g   Match globally, i.e., find all occurrences.
                   i   Do case-insensitive pattern matching.
                   m   Treat string as multiple lines.
                   o   Compile pattern only once.
                   s   Treat string as single line.
                   x   Use extended regular expressions.

               If "/" is the delimiter then the initial `m' is
               optional.  With the `m' you can use any pair of
               non-alphanumeric, non-whitespace characters as
               delimiters.  This is particularly useful for
               matching path names that contain "/", to avoid LTS
               (leaning toothpick syndrome).  If "?" is the
               delimiter, then the match-only-once rule of `?PAT­
               TERN?' applies.  If "'" is the delimiter, no
               interpolation is performed on the PATTERN.

               PATTERN may contain variables, which will be
               interpolated (and the pattern recompiled) every
               time the pattern search is evaluated, except for
               when the delimiter is a single quote.  (Note that
               `$)' and `$|' might not be interpolated because
               they look like end-of-string tests.)  If you want
               such a pattern to be compiled only once, add a
               `/o' after the trailing delimiter.  This avoids
               expensive run-time recompilations, and is useful
               when the value you are interpolating won't change
               over the life of the script.  However, mentioning
               `/o' constitutes a promise that you won't change
               the variables in the pattern.  If you change them,
               Perl won't even notice.  See also the section on
               "qr//".

               If the PATTERN evaluates to the empty string, the
               last successfully matched regular expression is
               used instead.

               If the `/g' option is not used, `m//' in list con­
               text returns a list consisting of the subexpres­
               sions matched by the parentheses in the pattern,
               i.e., (`$1', `$2', `$3'...).  (Note that here `$1'
               etc. are also set, and that this differs from Perl
               4's behavior.)  When there are no parentheses in
               the pattern, the return value is the list `(1)'
               for success.  With or without parentheses, an
               empty list is returned upon failure.

               Examples:

                   open(TTY, '/dev/tty');
                   <TTY> =~ /^y/i && foo();    # do foo if desired

                   if (/Version: *([0-9.]*)/) { $version = $1; }


                   # poor man's grep
                   $arg = shift;
                   while (<>) {
                       print if /$arg/o;       # compile only once
                   }

                   if (($F1, $F2, $Etc) = ($foo =~ /^(\S+)\s+(\S+)\s*(.*)/))

               This last example splits $foo into the first two
               words and the remainder of the line, and assigns
               those three fields to $F1, $F2, and $Etc.  The
               conditional is true if any variables were
               assigned, i.e., if the pattern matched.

               The `/g' modifier specifies global pattern match­
               ing--that is, matching as many times as possible
               within the string.  How it behaves depends on the
               context.  In list context, it returns a list of
               the substrings matched by any capturing parenthe­
               ses in the regular expression.  If there are no
               parentheses, it returns a list of all the matched
               strings, as if there were parentheses around the
               whole pattern.

               In scalar context, each execution of `m//g' finds
               the next match, returning true if it matches, and
               false if there is no further match.  The position
               after the last match can be read or set using the
               pos() function; see the pos entry in the perlfunc
               manpage.   A failed match normally resets the
               search position to the beginning of the string,
               but you can avoid that by adding the `/c' modifier
               (e.g. `m//gc').  Modifying the target string also
               resets the search position.

               You can intermix `m//g' matches with `m/\G.../g',
               where `\G' is a zero-width assertion that matches
               the exact position where the previous `m//g', if
               any, left off.  The `\G' assertion is not sup­
               ported without the `/g' modifier.  (Currently,
               without `/g', `\G' behaves just like `\A', but
               that's accidental and may change in the future.)

               Examples:

                   # list context
                   ($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);

                   $/ = ""; $* = 1;  # $* deprecated in modern perls
                   while (defined($paragraph = <>)) {
                       while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) {
                           $sentences++;
                       }
                   }
                   print "$sentences\n";

                   # using m//gc with \G
                   $_ = "ppooqppqq";
                   while ($i++ < 2) {
                       print "1: '";
                       print $1 while /(o)/gc; print "', pos=", pos, "\n";
                       print "2: '";
                       print $1 if /\G(q)/gc;  print "', pos=", pos, "\n";
                       print "3: '";
                       print $1 while /(p)/gc; print "', pos=", pos, "\n";
                   }

               The last example should print:

                   1: 'oo', pos=4
                   2: 'q', pos=5
                   3: 'pp', pos=7
                   1: '', pos=7
                   2: 'q', pos=8
                   3: '', pos=8

               A useful idiom for `lex'-like scanners is
               `/\G.../gc'.  You can combine several regexps like
               this to process a string part-by-part, doing dif­
               ferent actions depending on which regexp matched.
               Each regexp tries to match where the previous one
               leaves off.

                $_ = <<'EOL';
                     $url = new URI::URL "http://www/";   die if $url eq "xXx";
                EOL
                LOOP:
                   {
                     print(" digits"),         redo LOOP if /\G\d+\b[,.;]?\s*/gc;
                     print(" lowercase"),      redo LOOP if /\G[a-z]+\b[,.;]?\s*/gc;
                     print(" UPPERCASE"),      redo LOOP if /\G[A-Z]+\b[,.;]?\s*/gc;
                     print(" Capitalized"),    redo LOOP if /\G[A-Z][a-z]+\b[,.;]?\s*/gc;
                     print(" MiXeD"),          redo LOOP if /\G[A-Za-z]+\b[,.;]?\s*/gc;
                     print(" alphanumeric"),   redo LOOP if /\G[A-Za-z0-9]+\b[,.;]?\s*/gc;
                     print(" line-noise"),     redo LOOP if /\G[^A-Za-z0-9]+/gc;
                     print ". That's all!\n";
                   }

               Here is the output (split into several lines):

                UPPERCASE line-noise lowercase line-noise lowercase line-noise
                lowercase lowercase line-noise lowercase lowercase line-noise
                MiXeD line-noise. That's all!

       q/STRING/

       `'STRING''
               A single-quoted, literal string.  A backslash rep­
               resents a backslash unless followed by the delim­
               iter or another backslash, in which case the
               delimiter or backslash is interpolated.

                   $foo = q!I said, "You said, 'She said it.'"!;
                   $bar = q('This is it.');
                   $baz = '\n';                # a two-character string

       qq/STRING/

       ""STRING""
               A double-quoted, interpolated string.

                   $_ .= qq
                    (*** The previous line contains the naughty word "$1".\n)
                               if /\b(tcl|java|python)\b/i;      # :-)
                   $baz = "\n";                # a one-character string

       qr/STRING/imosx
               This operators quotes--and compiles--its STRING as
               a regular expression.  STRING is interpolated the
               same way as PATTERN in `m/PATTERN/'.  If "'" is
               used as the delimiter, no interpolation is done.
               Returns a Perl value which may be used instead of
               the corresponding `/STRING/imosx' expression.

               For example,

                   $rex = qr/my.STRING/is;
                   s/$rex/foo/;

               is equivalent to

                   s/my.STRING/foo/is;

               The result may be used as a subpattern in a match:

                   $re = qr/$pattern/;
                   $string =~ /foo${re}bar/;   # can be interpolated in other patterns
                   $string =~ $re;             # or used standalone
                   $string =~ /$re/;           # or this way

               of execution of qr() operator, using qr() may have
               speed advantages in some situations, notably if
               the result of qr() is used standalone:

                   sub match {
                       my $patterns = shift;
                       my @compiled = map qr/$_/i, @$patterns;
                       grep {
                           my $success = 0;
                           foreach my $pat (@compiled) {
                               $success = 1, last if /$pat/;
                           }
                           $success;
                       } @_;
                   }

               Precompilation of the pattern into an internal
               representation at the moment of qr() avoids a need
               to recompile the pattern every time a match
               `/$pat/' is attempted.  (Perl has many other
               internal optimizations, but none would be trig­
               gered in the above example if we did not use qr()
               operator.)

               Options are:

                   i   Do case-insensitive pattern matching.
                   m   Treat string as multiple lines.
                   o   Compile pattern only once.
                   s   Treat string as single line.
                   x   Use extended regular expressions.

               See the perlre manpage for additional information
               on valid syntax for STRING, and for a detailed
               look at the semantics of regular expressions.

       qx/STRING/

       `STRING`
               A string which is (possibly) interpolated and then
               executed as a system command with `/bin/sh' or its
               equivalent.  Shell wildcards, pipes, and redirec­
               tions will be honored.  The collected standard
               output of the command is returned; standard error
               is unaffected.  In scalar context, it comes back
               as a single (potentially multi-line) string.  In
               list context, returns a list of lines (however
               you've defined lines with $/ or $INPUT_RECORD_SEP­
               ARATOR).

               Because backticks do not affect standard error,
               use shell file descriptor syntax (assuming the
               shell supports this) if you care to address this.


                   $output = `cmd 2>&1`;

               To capture a command's STDOUT but discard its
               STDERR:

                   $output = `cmd 2>/dev/null`;

               To capture a command's STDERR but discard its STD­
               OUT (ordering is important here):

                   $output = `cmd 2>&1 1>/dev/null`;

               To exchange a command's STDOUT and STDERR in order
               to capture the STDERR but leave its STDOUT to come
               out the old STDERR:

                   $output = `cmd 3>&1 1>&2 2>&3 3>&-`;

               To read both a command's STDOUT and its STDERR
               separately, it's easiest and safest to redirect
               them separately to files, and then read from those
               files when the program is done:

                   system("program args 1>/tmp/program.stdout 2>/tmp/program.stderr");

               Using single-quote as a delimiter protects the
               command from Perl's double-quote interpolation,
               passing it on to the shell instead:

                   $perl_info  = qx(ps $$);            # that's Perl's $$
                   $shell_info = qx'ps $$';            # that's the new shell's $$

               How that string gets evaluated is entirely subject
               to the command interpreter on your system.  On
               most platforms, you will have to protect shell
               metacharacters if you want them treated literally.
               This is in practice difficult to do, as it's
               unclear how to escape which characters.  See the
               perlsec manpage for a clean and safe example of a
               manual fork() and exec() to emulate backticks
               safely.

               On some platforms (notably DOS-like ones), the
               shell may not be capable of dealing with multiline
               commands, so putting newlines in the string may
               not get you what you want.  You may be able to
               evaluate multiple commands in a single line by
               separating them with the command separator charac­
               ter, if your shell supports that (e.g. `;' on many
               Unix shells; `&' on the Windows NT `cmd' shell).

               Beginning with v5.6.0, Perl will attempt to flush

               child process, but this may not be supported on
               some platforms (see the perlport manpage).  To be
               safe, you may need to set `$|' ($AUTOFLUSH in
               English) or call the `autoflush()' method of
               `IO::Handle' on any open handles.

               Beware that some command shells may place restric­
               tions on the length of the command line.  You must
               ensure your strings don't exceed this limit after
               any necessary interpolations.  See the platform-
               specific release notes for more details about your
               particular environment.

               Using this operator can lead to programs that are
               difficult to port, because the shell commands
               called vary between systems, and may in fact not
               be present at all.  As one example, the `type'
               command under the POSIX shell is very different
               from the `type' command under DOS.  That doesn't
               mean you should go out of your way to avoid back­
               ticks when they're the right way to get something
               done.  Perl was made to be a glue language, and
               one of the things it glues together is commands.
               Just understand what you're getting yourself into.

               See the section on "I/O Operators" for more dis­
               cussion.

       qw/STRING/
               Evaluates to a list of the words extracted out of
               STRING, using embedded whitespace as the word
               delimiters.  It can be understood as being roughly
               equivalent to:

                   split(' ', q/STRING/);

               the difference being that it generates a real list
               at compile time.  So this expression:

                   qw(foo bar baz)

               is semantically equivalent to the list:

                   'foo', 'bar', 'baz'

               Some frequently seen examples:

                   use POSIX qw( setlocale localeconv )
                   @EXPORT = qw( foo bar baz );

               A common mistake is to try to separate the words
               with comma or to put comments into a multi-line
               `qw'-string.  For this reason, the `use warnings'

               able) produces warnings if the STRING contains the
               "," or the "#" character.

       s/PATTERN/REPLACEMENT/egimosx
               Searches a string for a pattern, and if found,
               replaces that pattern with the replacement text
               and returns the number of substitutions made.
               Otherwise it returns false (specifically, the
               empty string).

               If no string is specified via the `=~' or `!~'
               operator, the `$_' variable is searched and modi­
               fied.  (The string specified with `=~' must be
               scalar variable, an array element, a hash element,
               or an assignment to one of those, i.e., an
               lvalue.)

               If the delimiter chosen is a single quote, no
               interpolation is done on either the PATTERN or the
               REPLACEMENT.  Otherwise, if the PATTERN contains a
               $ that looks like a variable rather than an end-
               of-string test, the variable will be interpolated
               into the pattern at run-time.  If you want the
               pattern compiled only once the first time the
               variable is interpolated, use the `/o' option.  If
               the pattern evaluates to the empty string, the
               last successfully executed regular expression is
               used instead.  See the perlre manpage for further
               explanation on these.  See the perllocale manpage
               for discussion of additional considerations that
               apply when `use locale' is in effect.

               Options are:

                   e   Evaluate the right side as an expression.
                   g   Replace globally, i.e., all occurrences.
                   i   Do case-insensitive pattern matching.
                   m   Treat string as multiple lines.
                   o   Compile pattern only once.
                   s   Treat string as single line.
                   x   Use extended regular expressions.

               Any non-alphanumeric, non-whitespace delimiter may
               replace the slashes.  If single quotes are used,
               no interpretation is done on the replacement
               string (the `/e' modifier overrides this, how­
               ever).  Unlike Perl 4, Perl 5 treats backticks as
               normal delimiters; the replacement text is not
               evaluated as a command.  If the PATTERN is delim­
               ited by bracketing quotes, the REPLACEMENT has its
               own pair of quotes, which may or may not be brack­
               eting quotes, e.g., `s(foo)(bar)' or
               `s<foo>/bar/'.  A `/e' will cause the replacement

               expression and evaluated right then and there.  It
               is, however, syntax checked at compile-time. A
               second `e' modifier will cause the replacement
               portion to be `eval'ed before being run as a Perl
               expression.

               Examples:

                   s/\bgreen\b/mauve/g;                # don't change wintergreen

                   $path =~ s|/usr/bin|/usr/local/bin|;

                   s/Login: $foo/Login: $bar/; # run-time pattern

                   ($foo = $bar) =~ s/this/that/;      # copy first, then change

                   $count = ($paragraph =~ s/Mister\b/Mr./g);  # get change-count

                   $_ = 'abc123xyz';
                   s/\d+/$&*2/e;               # yields 'abc246xyz'
                   s/\d+/sprintf("%5d",$&)/e;  # yields 'abc  246xyz'
                   s/\w/$& x 2/eg;             # yields 'aabbcc  224466xxyyzz'

                   s/%(.)/$percent{$1}/g;      # change percent escapes; no /e
                   s/%(.)/$percent{$1} || $&/ge;       # expr now, so /e
                   s/^=(\w+)/&pod($1)/ge;      # use function call

                   # expand variables in $_, but dynamics only, using
                   # symbolic dereferencing
                   s/\$(\w+)/${$1}/g;

                   # Add one to the value of any numbers in the string
                   s/(\d+)/1 + $1/eg;

                   # This will expand any embedded scalar variable
                   # (including lexicals) in $_ : First $1 is interpolated
                   # to the variable name, and then evaluated
                   s/(\$\w+)/$1/eeg;

                   # Delete (most) C comments.
                   $program =~ s {
                       /\*     # Match the opening delimiter.
                       .*?     # Match a minimal number of characters.
                       \*/     # Match the closing delimiter.
                   } []gsx;

                   s/^\s*(.*?)\s*$/$1/;        # trim white space in $_, expensively

                   for ($variable) {           # trim white space in $variable, cheap
                       s/^\s+//;
                       s/\s+$//;
                   }


               Note the use of $ instead of \ in the last exam­
               ple.  Unlike sed, we use the \<digit> form in only
               the left hand side.  Anywhere else it's $<digit>.

               Occasionally, you can't use just a `/g' to get all
               the changes to occur that you might want.  Here
               are two common cases:

                   # put commas in the right places in an integer
                   1 while s/(\d)(\d\d\d)(?!\d)/$1,$2/g;

                   # expand tabs to 8-column spacing
                   1 while s/\t+/' ' x (length($&)*8 - length($`)%8)/e;

       tr/SEARCHLIST/REPLACEMENTLIST/cdsUC

       y/SEARCHLIST/REPLACEMENTLIST/cdsUC
               Transliterates all occurrences of the characters
               found in the search list with the corresponding
               character in the replacement list.  It returns the
               number of characters replaced or deleted.  If no
               string is specified via the =~ or !~ operator, the
               $_ string is transliterated.  (The string speci­
               fied with =~ must be a scalar variable, an array
               element, a hash element, or an assignment to one
               of those, i.e., an lvalue.)

               A character range may be specified with a hyphen,
               so `tr/A-J/0-9/' does the same replacement as
               `tr/ACEGIBDFHJ/0246813579/'.  For sed devotees,
               `y' is provided as a synonym for `tr'.  If the
               SEARCHLIST is delimited by bracketing quotes, the
               REPLACEMENTLIST has its own pair of quotes, which
               may or may not be bracketing quotes, e.g.,
               `tr[A-Z][a-z]' or `tr(+\-*/)/ABCD/'.

               Note also that the whole range idea is rather
               unportable between character sets--and even within
               character sets they may cause results you probably
               didn't expect.  A sound principle is to use only
               ranges that begin from and end at either alphabets
               of equal case (a-e, A-E), or digits (0-4).  Any­
               thing else is unsafe.  If in doubt, spell out the
               character sets in full.

               Options:

                   d   Delete found but unreplaced characters.
                   s   Squash duplicate replaced characters.
                   U   Translate to/from UTF-8.
                   C   Translate to/from 8-bit char (octet).

               If the `/c' modifier is specified, the SEARCHLIST
               character set is complemented.  If the `/d' modi­
               fier is specified, any characters specified by
               SEARCHLIST not found in REPLACEMENTLIST are
               deleted.  (Note that this is slightly more flexi­
               ble than the behavior of some tr programs, which
               delete anything they find in the SEARCHLIST,
               period.) If the `/s' modifier is specified,
               sequences of characters that were transliterated
               to the same character are squashed down to a sin­
               gle instance of the character.

               If the `/d' modifier is used, the REPLACEMENTLIST
               is always interpreted exactly as specified.  Oth­
               erwise, if the REPLACEMENTLIST is shorter than the
               SEARCHLIST, the final character is replicated till
               it is long enough.  If the REPLACEMENTLIST is
               empty, the SEARCHLIST is replicated.  This latter
               is useful for counting characters in a class or
               for squashing character sequences in a class.

               The first `/U' or `/C' modifier applies to the
               left side of the translation.  The second one
               applies to the right side.  If present, these mod­
               ifiers override the current utf8 state.

               Examples:

                   $ARGV[1] =~ tr/A-Z/a-z/;    # canonicalize to lower case

                   $cnt = tr/*/*/;             # count the stars in $_

                   $cnt = $sky =~ tr/*/*/;     # count the stars in $sky

                   $cnt = tr/0-9//;            # count the digits in $_

                   tr/a-zA-Z//s;               # bookkeeper -> bokeper

                   ($HOST = $host) =~ tr/a-z/A-Z/;

                   tr/a-zA-Z/ /cs;             # change non-alphas to single space

                   tr [\200-\377]
                      [\000-\177];             # delete 8th bit

                   tr/\0-\xFF//CU;             # change Latin-1 to Unicode
                   tr/\0-\x{FF}//UC;           # change Unicode to Latin-1

               acter, only the first one is used:

                   tr/AAA/XYZ/

               will transliterate any A to X.

               Because the transliteration table is built at com­
               pile time, neither the SEARCHLIST nor the REPLACE­
               MENTLIST are subjected to double quote interpola­
               tion.  That means that if you want to use vari­
               ables, you must use an eval():

                   eval "tr/$oldlist/$newlist/";
                   die $@ if $@;

                   eval "tr/$oldlist/$newlist/, 1" or die $@;

       Gory details of parsing quoted constructs

       When presented with something that might have several dif­
       ferent interpretations, Perl uses the DWIM (that's "Do
       What I Mean") principle to pick the most probable inter­
       pretation.  This strategy is so successful that Perl pro­
       grammers often do not suspect the ambivalence of what they
       write.  But from time to time, Perl's notions differ sub­
       stantially from what the author honestly meant.

       This section hopes to clarify how Perl handles quoted con­
       structs.  Although the most common reason to learn this is
       to unravel labyrinthine regular expressions, because the
       initial steps of parsing are the same for all quoting
       operators, they are all discussed together.

       The most important Perl parsing rule is the first one dis­
       cussed below: when processing a quoted construct, Perl
       first finds the end of that construct, then interprets its
       contents.  If you understand this rule, you may skip the
       rest of this section on the first reading.  The other
       rules are likely to contradict the user's expectations
       much less frequently than this first one.

       Some passes discussed below are performed concurrently,
       but because their results are the same, we consider them
       individually.  For different quoting constructs, Perl per­
       forms different numbers of passes, from one to five, but
       these passes are always performed in the same order.

       Finding the end
           The first pass is finding the end of the quoted con­
           struct, whether it be a multicharacter delimiter
           `"\nEOF\n"' in the `<<EOF' construct, a `/' that ter­
           minates a `qq//' construct, a `]' which terminates

           started with `<'.

           When searching for single-character non-pairing delim­
           iters, such as `/', combinations of `\\' and `\/' are
           skipped.  However, when searching for single-character
           pairing delimiter like `[', combinations of `\\',
           `\]', and `\[' are all skipped, and nested `[', `]'
           are skipped as well.  When searching for multicharac­
           ter delimiters, nothing is skipped.

           For constructs with three-part delimiters (`s///',
           `y///', and `tr///'), the search is repeated once
           more.

           During this search no attention is paid to the seman­
           tics of the construct.  Thus:

               "$hash{"$foo/$bar"}"

           or:

               m/
                 bar       # NOT a comment, this slash / terminated m//!
                /x

           do not form legal quoted expressions.   The quoted
           part ends on the first `"' and `/', and the rest hap­
           pens to be a syntax error.  Because the slash that
           terminated `m//' was followed by a `SPACE', the exam­
           ple above is not `m//x', but rather `m//' with no `/x'
           modifier.  So the embedded `#' is interpreted as a
           literal `#'.

       Removal of backslashes before delimiters
           During the second pass, text between the starting and
           ending delimiters is copied to a safe location, and
           the `\' is removed from combinations consisting of `\'
           and delimiter--or delimiters, meaning both starting
           and ending delimiters will should these differ.  This
           removal does not happen for multi-character delim­
           iters.  Note that the combination `\\' is left intact,
           just as it was.

           Starting from this step no information about the
           delimiters is used in parsing.

       Interpolation
           The next step is interpolation in the text obtained,
           which is now delimiter-independent.  There are four
           different cases.

           `<<'EOF'', `m''', `s'''', `tr///', `y///'
               No interpolation is performed.

               The only interpolation is removal of `\' from
               pairs `\\'.

           `""""', ```', `qq//', `qx//', `<file*glob>'
               `\Q', `\U', `\u', `\L', `\l' (possibly paired with
               `\E') are converted to corresponding Perl con­
               structs.  Thus, `"$foo\Qbaz$bar"' is converted to
               `$foo . (quotemeta("baz" . $bar))' internally.
               The other combinations are replaced with appropri­
               ate expansions.

               Let it be stressed that whatever falls between
               `\Q' and `\E' is interpolated in the usual way.
               Something like `"\Q\\E"' has no `\E' inside.
               instead, it has `\Q', `\\', and `E', so the result
               is the same as for `"\\\\E"'.  As a general rule,
               backslashes between `\Q' and `\E' may lead to
               counterintuitive results.  So, `"\Q\t\E"' is con­
               verted to `quotemeta("\t")', which is the same as
               `"\\\t"' (since TAB is not alphanumeric).  Note
               also that:

                 $str = '\t';
                 return "\Q$str";

               may be closer to the conjectural intention of the
               writer of `"\Q\t\E"'.

               Interpolated scalars and arrays are converted
               internally to the `join' and `.' catentation oper­
               ations.  Thus, `"$foo XXX '@arr'"' becomes:

                 $foo . " XXX '" . (join $", @arr) . "'";

               All operations above are performed simultaneously,
               left to right.

               Because the result of `"\Q STRING \E"' has all
               metacharacters quoted, there is no way to insert a
               literal `$' or `@' inside a `\Q\E' pair.  If pro­
               tected by `\', `$' will be quoted to became
               `"\\\$"'; if not, it is interpreted as the start
               of an interpolated scalar.

               Note also that the interpolation code needs to
               make a decision on where the interpolated scalar
               ends.  For instance, whether `"a $b -> {c}"'
               really means:

                 "a " . $b . " -> {c}";

               or:


               Most of the time, the longest possible text that
               does not include spaces between components and
               which contains matching braces or brackets.
               because the outcome may be determined by voting
               based on heuristic estimators, the result is not
               strictly predictable.  Fortunately, it's usually
               correct for ambiguous cases.

           `?RE?', `/RE/', `m/RE/', `s/RE/foo/',
               Processing of `\Q', `\U', `\u', `\L', `\l', and
               interpolation happens (almost) as with `qq//' con­
               structs, but the substitution of `\' followed by
               RE-special chars (including `\') is not performed.
               Moreover, inside `(?{BLOCK})', `(?# comment )',
               and a `#'-comment in a `//x'-regular expression,
               no processing is performed whatsoever.  This is
               the first step at which the presence of the `//x'
               modifier is relevant.

               Interpolation has several quirks: `$|', `$(', and
               `$)' are not interpolated, and constructs
               `$var[SOMETHING]' are voted (by several different
               estimators) to be either an array element or
               `$var' followed by an RE alternative.  This is
               where the notation `${arr[$bar]}' comes handy:
               `/${arr[0-9]}/' is interpreted as array element
               `-9', not as a regular expression from the vari­
               able `$arr' followed by a digit, which would be
               the interpretation of `/$arr[0-9]/'.  Since voting
               among different estimators may occur, the result
               is not predictable.

               It is at this step that `\1' is begrudgingly con­
               verted to `$1' in the replacement text of `s///'
               to correct the incorrigible sed hackers who
               haven't picked up the saner idiom yet.  A warning
               is emitted if the `use warnings' pragma or the -w
               command-line flag (that is, the `$^W' variable)
               was set.

               The lack of processing of `\\' creates specific
               restrictions on the post-processed text.  If the
               delimiter is `/', one cannot get the combination
               `\/' into the result of this step.  `/' will fin­
               ish the regular expression, `\/' will be stripped
               to `/' on the previous step, and `\\/' will be
               left as is.  Because `/' is equivalent to `\/'
               inside a regular expression, this does not matter
               unless the delimiter happens to be character spe­
               cial to the RE engine, such as in `s*foo*bar*',
               `m[foo]', or `?foo?'; or an alphanumeric char, as
               in:


               In the RE above, which is intentionally obfuscated
               for illustration, the delimiter is `m', the modi­
               fier is `mx', and after backslash-removal the RE
               is the same as for `m/ ^ a s* b /mx').  There's
               more than one reason you're encouraged to restrict
               your delimiters to non-alphanumeric, non-whites­
               pace choices.

           This step is the last one for all constructs except
           regular expressions, which are processed further.

       Interpolation of regular expressions
           Previous steps were performed during the compilation
           of Perl code, but this one happens at run
           time--although it may be optimized to be calculated at
           compile time if appropriate.  After preprocessing
           described above, and possibly after evaluation if
           catenation, joining, casing translation, or metaquot­
           ing are involved, the resulting string is passed to
           the RE engine for compilation.

           Whatever happens in the RE engine might be better dis­
           cussed in the perlre manpage, but for the sake of con­
           tinuity, we shall do so here.

           This is another step where the presence of the `//x'
           modifier is relevant.  The RE engine scans the string
           from left to right and converts it to a finite automa­
           ton.

           Backslashed characters are either replaced with corre­
           sponding literal strings (as with `\{'), or else they
           generate special nodes in the finite automaton (as
           with `\b').  Characters special to the RE engine (such
           as `|') generate corresponding nodes or groups of
           nodes.  `(?#...)' comments are ignored.  All the rest
           is either converted to literal strings to match, or
           else is ignored (as is whitespace and `#'-style com­
           ments if `//x' is present).

           Parsing of the bracketed character class construct,
           `[...]', is rather different than the rule used for
           the rest of the pattern.  The terminator of this con­
           struct is found using the same rules as for finding
           the terminator of a `{}'-delimited construct, the only
           exception being that `]' immediately following `[' is
           treated as though preceded by a backslash.  Similarly,
           the terminator of `(?{...})' is found using the same
           rules as for finding the terminator of a `{}'-delim­
           ited construct.

           It is possible to inspect both the string given to RE

           arguments `debug'/`debugcolor' in the `use the re man­
           page' pragma, as well as Perl's -Dr command-line
           switch documented in the Command Switches entry in the
           perlrun manpage.

       Optimization of regular expressions
           This step is listed for completeness only.  Since it
           does not change semantics, details of this step are
           not documented and are subject to change without
           notice.  This step is performed over the finite
           automaton that was generated during the previous pass.

           It is at this stage that `split()' silently optimizes
           `/^/' to mean `/^/m'.

       I/O Operators

       There are several I/O operators you should know about.

       A string enclosed by backticks (grave accents) first
       undergoes double-quote interpolation.  It is then inter­
       preted as an external command, and the output of that com­
       mand is the value of the pseudo-literal, j string consist­
       ing of all output is returned.  In list context, a list of
       values is returned, one per line of output.  (You can set
       `$/' to use a different line terminator.)  The command is
       executed each time the pseudo-literal is evaluated.  The
       status value of the command is returned in `$?' (see the
       perlvar manpage for the interpretation of `$?').  Unlike
       in csh, no translation is done on the return data--new­
       lines remain newlines.  Unlike in any of the shells, sin­
       gle quotes do not hide variable names in the command from
       interpretation.  To pass a literal dollar-sign through to
       the shell you need to hide it with a backslash.  The gen­
       eralized form of backticks is `qx//'.  (Because backticks
       always undergo shell expansion as well, see the perlsec
       manpage for security concerns.)

       In scalar context, evaluating a filehandle in angle brack­
       ets yields the next line from that file (the newline, if
       any, included), or `undef' at end-of-file or on error.
       When `$/' is set to `undef' (sometimes known as file-slurp
       mode) and the file is empty, it returns `''' the first
       time, followed by `undef' subsequently.

       Ordinarily you must assign the returned value to a vari­
       able, but there is one situation where an automatic
       assignment happens.  If and only if the input symbol is
       the only thing inside the conditional of a `while' state­
       ment (even if disguised as a `for(;;)' loop), the value is
       automatically assigned to the global variable $_, destroy­
       ing whatever was there previously.  (This may seem like an
       odd thing to you, but you'll use the construct in almost

       implicitly localized.  You'll have to put a `local $_;'
       before the loop if you want that to happen.

       The following lines are equivalent:

           while (defined($_ = <STDIN>)) { print; }
           while ($_ = <STDIN>) { print; }
           while (<STDIN>) { print; }
           for (;<STDIN>;) { print; }
           print while defined($_ = <STDIN>);
           print while ($_ = <STDIN>);
           print while <STDIN>;

       This also behaves similarly, but avoids $_ :

           while (my $line = <STDIN>) { print $line }

       In these loop constructs, the assigned value (whether
       assignment is automatic or explicit) is then tested to see
       whether it is defined.  The defined test avoids problems
       where line has a string value that would be treated as
       false by Perl, for example a "" or a "0" with no trailing
       newline.  If you really mean for such values to terminate
       the loop, they should be tested for explicitly:

           while (($_ = <STDIN>) ne '0') { ... }
           while (<STDIN>) { last unless $_; ... }

       In other boolean contexts, `<filehandle>' without an
       explicit `defined' test or comparison elicit a warning if
       the `use warnings' pragma or the -w command-line switch
       (the `$^W' variable) is in effect.

       The filehandles STDIN, STDOUT, and STDERR are predefined.
       (The filehandles `stdin', `stdout', and `stderr' will also
       work except in packages, where they would be interpreted
       as local identifiers rather than global.)  Additional
       filehandles may be created with the open() function,
       amongst others.  See the perlopentut manpage and the open
       entry in the perlfunc manpage for details on this.

       If a <FILEHANDLE> is used in a context that is looking for
       a list, a list comprising all input lines is returned, one
       line per list element.  It's easy to grow to a rather
       large data space this way, so use with care.

       <FILEHANDLE> may also be spelled `readline(*FILEHANDLE)'.
       See the readline entry in the perlfunc manpage.

       The null filehandle <> is special: it can be used to emu­
       late the behavior of sed and awk.  Input from <> comes
       either from standard input, or from each file listed on
       the command line.  Here's how it works: the first time <>

       empty, `$ARGV[0]' is set to "-", which when opened gives
       you standard input.  The @ARGV array is then processed as
       a list of filenames.  The loop

           while (<>) {
               ...                     # code for each line
           }

       is equivalent to the following Perl-like pseudo code:

           unshift(@ARGV, '-') unless @ARGV;
           while ($ARGV = shift) {
               open(ARGV, $ARGV);
               while (<ARGV>) {
                   ...         # code for each line
               }
           }

       except that it isn't so cumbersome to say, and will actu­
       ally work.  It really does shift the @ARGV array and put
       the current filename into the $ARGV variable.  It also
       uses filehandle ARGV internally--<> is just a synonym for
       <ARGV>, which is magical.  (The pseudo code above doesn't
       work because it treats <ARGV> as non-magical.)

       You can modify @ARGV before the first <> as long as the
       array ends up containing the list of filenames you really
       want.  Line numbers (`$.')  continue as though the input
       were one big happy file.  See the example in the eof entry
       in the perlfunc manpage for how to reset line numbers on
       each file.

       If you want to set @ARGV to your own list of files, go
       right ahead.  This sets @ARGV to all plain text files if
       no @ARGV was given:

           @ARGV = grep { -f && -T } glob('*') unless @ARGV;

       You can even set them to pipe commands.  For example, this
       automatically filters compressed arguments through gzip:

           @ARGV = map { /\.(gz|Z)$/ ? "gzip -dc < $_ |" : $_ } @ARGV;

       If you want to pass switches into your script, you can use
       one of the Getopts modules or put a loop on the front like
       this:

               shift;
               last if /^--$/;
               if (/^-D(.*)/) { $debug = $1 }
               if (/^-v/)     { $verbose++  }
               # ...           # other switches
           }

           while (<>) {
               # ...           # code for each line
           }

       The <> symbol will return `undef' for end-of-file only
       once.  If you call it again after this, it will assume you
       are processing another @ARGV list, and if you haven't set
       @ARGV, will read input from STDIN.

       If angle brackets contain is a simple scalar variable
       (e.g., <$foo>), then that variable contains the name of
       the filehandle to input from, or its typeglob, or a refer­
       ence to the same.  For example:

           $fh = \*STDIN;
           $line = <$fh>;

       If what's within the angle brackets is neither a filehan­
       dle nor a simple scalar variable containing a filehandle
       name, typeglob, or typeglob reference, it is interpreted
       as a filename pattern to be globbed, and either a list of
       filenames or the next filename in the list is returned,
       depending on context.  This distinction is determined on
       syntactic grounds alone.  That means `<$x>' is always a
       readline() from an indirect handle, but `<$hash{key}>' is
       always a glob().  That's because $x is a simple scalar
       variable, but `$hash{key}' is not--it's a hash element.

       One level of double-quote interpretation is done first,
       but you can't say `<$foo>' because that's an indirect
       filehandle as explained in the previous paragraph.  (In
       older versions of Perl, programmers would insert curly
       brackets to force interpretation as a filename glob:
       `<${foo}>'.  These days, it's considered cleaner to call
       the internal function directly as `glob($foo)', which is
       probably the right way to have done it in the first
       place.)  For example:

           while (<*.c>) {
               chmod 0644, $_;
           }

       is roughly equivalent to:

           while (<FOO>) {
               chop;
               chmod 0644, $_;
           }

       except that the globbing is actually done internally using
       the standard `File::Glob' extension.  Of course, the
       shortest way to do the above is:

           chmod 0644, <*.c>;

       A (file)glob evaluates its (embedded) argument only when
       it is starting a new list.  All values must be read before
       it will start over.  In list context, this isn't important
       because you automatically get them all anyway.  However,
       in scalar context the operator returns the next value each
       time it's called, or C run out.  As with filehandle reads,
       an automatic `defined' is generated when the glob occurs
       in the test part of a `while', because legal glob returns
       (e.g. a file called 0) would otherwise terminate the loop.
       Again, `undef' is returned only once.  So if you're
       expecting a single value from a glob, it is much better to
       say

           ($file) = <blurch*>;

       than

           $file = <blurch*>;

       because the latter will alternate between returning a
       filename and returning false.

       It you're trying to do variable interpolation, it's defi­
       nitely better to use the glob() function, because the
       older notation can cause people to become confused with
       the indirect filehandle notation.

           @files = glob("$dir/*.[ch]");
           @files = glob($files[$i]);

       Constant Folding

       Like C, Perl does a certain amount of expression evalua­
       tion at compile time whenever it determines that all argu­
       ments to an operator are static and have no side effects.
       In particular, string concatenation happens at compile
       time between literals that don't do variable substitution.
       Backslash interpolation also happens at compile time.  You
       can say

               'good men to come to.'

       and this all reduces to one string internally.  Likewise,
       if you say

           foreach $file (@filenames) {
               if (-s $file > 5 + 100 * 2**16) {  }
           }

       the compiler will precompute the number which that expres­
       sion represents so that the interpreter won't have to.

       Bitwise String Operators

       Bitstrings of any size may be manipulated by the bitwise
       operators (`~ | & ^').

       If the operands to a binary bitwise op are strings of dif­
       ferent sizes, | and ^ ops act as though the shorter
       operand had additional zero bits on the right, while the &
       op acts as though the longer operand were truncated to the
       length of the shorter.  The granularity for such extension
       or truncation is one or more bytes.

           # ASCII-based examples
           print "j p \n" ^ " a h";            # prints "JAPH\n"
           print "JA" | "  ph\n";              # prints "japh\n"
           print "japh\nJunk" & '_____';       # prints "JAPH\n";
           print 'p N$' ^ " E<H\n";            # prints "Perl\n";

       If you are intending to manipulate bitstrings, be certain
       that you're supplying bitstrings: If an operand is a num­
       ber, that will imply a numeric bitwise operation.  You may
       explicitly show which type of operation you intend by
       using `""' or `0+', as in the examples below.

           $foo =  150  |  105 ;       # yields 255  (0x96 | 0x69 is 0xFF)
           $foo = '150' |  105 ;       # yields 255
           $foo =  150  | '105';       # yields 255
           $foo = '150' | '105';       # yields string '155' (under ASCII)

           $baz = 0+$foo & 0+$bar;     # both ops explicitly numeric
           $biz = "$foo" ^ "$bar";     # both ops explicitly stringy

       See the vec entry in the perlfunc manpage for information
       on how to manipulate individual bits in a bit vector.

       Integer Arithmetic

       By default, Perl assumes that it must do most of its
       arithmetic in floating point.  But by saying

           use integer;

       operations (if it feels like it) from here to the end of
       the enclosing BLOCK.  An inner BLOCK may countermand this
       by saying

           no integer;

       which lasts until the end of that BLOCK.  Note that this
       doesn't mean everything is only an integer, merely that
       Perl may use integer operations if it is so inclined.  For
       example, even under `use integer', if you take the
       `sqrt(2)', you'll still get `1.4142135623731' or so.

       Used on numbers, the bitwise operators ("&", "|", "^",
       "~", "<<", and ">>") always produce integral results.
       (But see also the Bitwise String Operators entry elsewhere
       in this document.)  However, `use integer' still has mean­
       ing for them.  By default, their results are interpreted
       as unsigned integers, but if `use integer' is in effect,
       their results are interpreted as signed integers.  For
       example, `~0' usually evaluates to a large integral value.
       However, `use integer; ~0' is `-1' on twos-complement
       machines.

       Floating-point Arithmetic

       While `use integer' provides integer-only arithmetic,
       there is no analogous mechanism to provide automatic
       rounding or truncation to a certain number of decimal
       places.  For rounding to a certain number of digits,
       sprintf() or printf() is usually the easiest route.  See
       the perlfaq4 manpage.

       Floating-point numbers are only approximations to what a
       mathematician would call real numbers.  There are
       infinitely more reals than floats, so some corners must be
       cut.  For example:

           printf "%.20g\n", 123456789123456789;
           #        produces 123456789123456784

       Testing for exact equality of floating-point equality or
       inequality is not a good idea.  Here's a (relatively
       expensive) work-around to compare whether two floating-
       point numbers are equal to a particular number of decimal
       places.  See Knuth, volume II, for a more robust treatment
       of this topic.

               my ($X, $Y, $POINTS) = @_;
               my ($tX, $tY);
               $tX = sprintf("%.${POINTS}g", $X);
               $tY = sprintf("%.${POINTS}g", $Y);
               return $tX eq $tY;
           }

       The POSIX module (part of the standard perl distribution)
       implements ceil(), floor(), and other mathematical and
       trigonometric functions.  The Math::Complex module (part
       of the standard perl distribution) defines mathematical
       functions that work on both the reals and the imaginary
       numbers.  Math::Complex not as efficient as POSIX, but
       POSIX can't work with complex numbers.

       Rounding in financial applications can have serious impli­
       cations, and the rounding method used should be specified
       precisely.  In these cases, it probably pays not to trust
       whichever system rounding is being used by Perl, but to
       instead implement the rounding function you need yourself.

       Bigger Numbers

       The standard Math::BigInt and Math::BigFloat modules pro­
       vide variable-precision arithmetic and overloaded opera­
       tors, although they're currently pretty slow.  At the cost
       of some space and considerable speed, they avoid the nor­
       mal pitfalls associated with limited-precision representa­
       tions.

           use Math::BigInt;
           $x = Math::BigInt->new('123456789123456789');
           print $x * $x;

           # prints +15241578780673678515622620750190521

       The non-standard modules SSLeay::BN and Math::Pari provide
       equivalent functionality (and much more) with a substan­
       tial performance savings.


Man(1) output converted with man2html