BIO_s_bio, BIO_make_bio_pair, BIO_destroy_bio_pair,
BIO_shutdown_wr, BIO_set_write_buf_size,
BIO_get_write_buf_size, BIO_new_bio_pair,
BIO_get_write_guarantee, BIO_ctrl_get_write_guarantee,
BIO_get_read_request, BIO_ctrl_get_read_request,
BIO_ctrl_reset_read_request - BIO pair BIO
SYNOPSIS
#include <openssl/bio.h>
BIO_METHOD *BIO_s_bio(void);
#define BIO_make_bio_pair(b1,b2) (int)BIO_ctrl(b1,BIO_C_MAKE_BIO_PAIR,0,b2)
#define BIO_destroy_bio_pair(b) (int)BIO_ctrl(b,BIO_C_DESTROY_BIO_PAIR,0,NULL)
#define BIO_shutdown_wr(b) (int)BIO_ctrl(b, BIO_C_SHUTDOWN_WR, 0, NULL)
#define BIO_set_write_buf_size(b,size) (int)BIO_ctrl(b,BIO_C_SET_WRITE_BUF_SIZE,size,NULL)
#define BIO_get_write_buf_size(b,size) (size_t)BIO_ctrl(b,BIO_C_GET_WRITE_BUF_SIZE,size,NULL)
int BIO_new_bio_pair(BIO **bio1, size_t writebuf1, BIO **bio2, size_t writebuf2);
#define BIO_get_write_guarantee(b) (int)BIO_ctrl(b,BIO_C_GET_WRITE_GUARANTEE,0,NULL)
size_t BIO_ctrl_get_write_guarantee(BIO *b);
#define BIO_get_read_request(b) (int)BIO_ctrl(b,BIO_C_GET_READ_REQUEST,0,NULL)
size_t BIO_ctrl_get_read_request(BIO *b);
int BIO_ctrl_reset_read_request(BIO *b);
DESCRIPTION
BIO_s_bio() returns the method for a BIO pair. A BIO pair
is a pair of source/sink BIOs where data written to either
half of the pair is buffered and can be read from the
other half. Both halves must usually by handled by the
same application thread since no locking is done on the
internal data structures.
Since BIO chains typically end in a source/sink BIO it is
possible to make this one half of a BIO pair and have all
the data processed by the chain under application control.
One typical use of BIO pairs is to place TLS/SSL I/O under
application control, this can be used when the application
wishes to use a non standard transport for TLS/SSL or the
normal socket routines are inappropriate.
Calls to BIO_read() will read data from the buffer or
request a retry if no data is available.
Calls to BIO_write() will place data in the buffer or
request a retry if the buffer is full.
BIO_ctrl_wpending() can be used to determine the amount of
pending data in the read or write buffer.
BIO_reset() clears any data in the write buffer.
BIO_make_bio_pair() joins two separate BIOs into a
connected pair.
BIO_destroy_pair() destroys the association between two
connected BIOs. Freeing up any half of the pair will
automatically destroy the association.
BIO_shutdown_wr() is used to close down a BIO b. After
this call no further writes on BIO b are allowed (they
will return an error). Reads on the other half of the pair
will return any pending data or EOF when all pending data
has been read.
BIO_set_write_buf_size() sets the write buffer size of BIO
b to size. If the size is not initialized a default value
is used. This is currently 17K, sufficient for a maximum
size TLS record.
BIO_get_write_buf_size() returns the size of the write
buffer.
BIO_new_bio_pair() combines the calls to BIO_new(),
BIO_make_bio_pair() and BIO_set_write_buf_size() to create
a connected pair of BIOs bio1, bio2 with write buffer
sizes writebuf1 and writebuf2. If either size is zero then
the default size is used.
BIO_get_write_guarantee() and
BIO_ctrl_get_write_guarantee() return the maximum length
of data that can be currently written to the BIO. Writes
larger than this value will return a value from
BIO_write() less than the amount requested or if the
buffer is full request a retry.
BIO_ctrl_get_write_guarantee() is a function whereas
BIO_get_write_guarantee() is a macro.
BIO_get_read_request() and BIO_ctrl_get_read_request()
return the amount of data requested, or the buffer size if
it is less, if the last read attempt at the other half of
the BIO pair failed due to an empty buffer. This can be
used to determine how much data should be written to the
BIO so the next read will succeed: this is most useful in
TLS/SSL applications where the amount of data read is
usually meaningful rather than just a buffer size. After a
successful read this call will return zero. It also will
return zero once new data has been written satisfying the
read request or part of it. Note that
BIO_get_read_request() never returns an amount larger than
BIO_ctrl_reset_read_request() can also be used to reset
the value returned by BIO_get_read_request() to zero.
NOTES
Both halves of a BIO pair should be freed. That is even if
one half is implicit freed due to a BIO_free_all() or
SSL_free() call the other half needs to be freed.
When used in bidirectional applications (such as TLS/SSL)
care should be taken to flush any data in the write
buffer. This can be done by calling BIO_pending() on the
other half of the pair and, if any data is pending,
reading it and sending it to the underlying transport.
This must be done before any normal processing (such as
calling select() ) due to a request and BIO_should_read()
being true.
To see why this is important consider a case where a
request is sent using BIO_write() and a response read with
BIO_read(), this can occur during an TLS/SSL handshake for
example. BIO_write() will succeed and place data in the
write buffer. BIO_read() will initially fail and
BIO_should_read() will be true. If the application then
waits for data to be available on the underlying transport
before flushing the write buffer it will never succeed
because the request was never sent!
EXAMPLE
TBA
SEE ALSO
SSL_set_bio(3), ssl(3), bio(3), BIO_should_retry(3),
BIO_read(3)
BIO_get_write_guarantee, BIO_ctrl_get_write_guarantee,
BIO_get_read_request, BIO_ctrl_get_read_request,
BIO_ctrl_reset_read_request - BIO pair BIO"
Man(1) output converted with
man2html