QRegExp - Pattern matching using regular expressions or
wildcards
#include <qregexp.h>
Public Members
QRegExp ()
QRegExp ( const QString &, bool caseSensitive=TRUE, bool
wildcard=FALSE )
QRegExp ( const QRegExp & )
~QRegExp ()
QRegExp& operator= ( const QRegExp & )
QRegExp& operator= ( const QString & pattern ) (obsolete)
bool operator== ( const QRegExp & ) const
bool operator!= ( const QRegExp & r ) const
bool isEmpty () const
bool isValid () const
bool caseSensitive () const
void setCaseSensitive ( bool )
bool wildcard () const
void setWildcard ( bool )
QString pattern () const
void setPattern ( const QString & pattern )
int match ( const QString & str, int index=0, int * len=0,
bool indexIsStart = TRUE ) const
int find ( const QString & str, int index )
Protected Members
void compile () (internal)
const QChar* matchstr ( uint *, const QChar *, uint, const
QChar * ) const (internal)
DESCRIPTION
The QRegExp class provides pattern matching using regular
expressions or wildcards.
QRegExp knows these regexp primitives:
c matches the character 'c'
^ matches start of input
$ matches end of input
[] matches a defined set of characters - see below.
a* matches a sequence of zero or more a's
a+ matches a sequence of one or more a's
\c escape code for matching special characters such as \,
[, *, +, . etc.
\t matches the TAB character (9)
\n matches newline (10)
\r matches return (13)
\s matches a white space (defined as any character for
which QChar::isSpace() returns TRUE. This includes
at least ASCII characters 9 (TAB), 10 (LF), 11
(VT), 12(FF), 13 (CR) and 32 (Space)).
\d matches a digit (defined as any character for which
QChar::isDigit() returns TRUE. This includes at
least ASCII characters '0'-'9').
\x1f6b matches the character with unicode point U1f6b
(hexadecimal 1f6b). \x0012 will match the
ASCII/Latin1 character 0x12 (18 decimal, 12
hexadecimal).
\022 matches the ASCII/Latin1 character 022 (18 decimal,
22 octal).
In wildcard mode, it only knows four primitives:
c matches the character 'c'
? matches any character
* matches any sequence of characters
[] matches a defined set of characters - see below.
QRegExp supports Unicode both in the pattern strings and
in the strings to be matched.
When writing regular expressions in C++ code, remember
that C++ processes \ characters. So in order to match e.g.
a "." character, you must write "\\." in C++ source, not
"\.".
A character set matches a defined set of characters. For
example, [BSD] matches any of 'B', 'D' and 'S'. Within a
character set, the special characters '.', '*', '?', '^',
'$', '+' and '[' lose their special meanings. The
following special characters apply:
^ When placed first in the list, changes the character set
to match any character not in the list. To include
place it anywhere but first.
- Defines a range of characters. To include the character
'-' itself in the set, escape it or place it last.
] Ends the character set definition. To include the
character ']' itself in the set, escape it or place
it first (but after the negation operator '^', if
present) Thus, [a-zA-Z0-9.] matches upper and lower
case ASCII letters, digits and dot; and [^\s]
matches everything except white space.
\note In Qt 3.0, the language of regular expressions will
contain five more special characters, namely '(', ')',
'{', '|' and '}'. To ease porting, it's a good idea to
escape these characters with a backslash in all the
regular expressions you'll write from now on.
Bugs and limitations:
Case insensitive matching is not supported for non-
ASCII/Latin1 (non-8bit) characters. Any character
with a non-zero QChar.row() is matched case
sensitively even if the QRegExp is in case
insensitive mode.
Examples: qmag/qmag.cpp
MEMBER FUNCTION DOCUMENTATION
QRegExp::QRegExp ()
Constructs an empty regular expression.
QRegExp::QRegExp ( const QString & pattern, bool
caseSensitive=TRUE, bool wildcard=FALSE )
Constructs a regular expression.
Arguments:
pattern is the regular expression pattern string.
caseSensitive specifies whether or not to use case
sensitive matching.
wildcard specifies whether the pattern string should be
used for wildcard matching (also called globbing
expression), normally used for matching file names.
See also setWildcard().
QRegExp::QRegExp ( const QRegExp & r )
Constructs a regular expression which is a copy of r.
See also operator=(const and QRegExp&).
Destructs the regular expression and cleans up its
internal data.
bool QRegExp::caseSensitive () const
Returns TRUE if case sensitivity is enabled, otherwise
FALSE. The default is TRUE.
See also setCaseSensitive().
int QRegExp::find ( const QString & str, int index )
Attempts to match in str, starting from position index.
Returns the position of the match, or -1 if there was no
match.
See also match().
bool QRegExp::isEmpty () const
Returns TRUE if the regexp is empty.
bool QRegExp::isValid () const
Returns TRUE if the regexp is valid, or FALSE if it is
invalid.
The pattern "[a-z" is an example of an invalid pattern,
since it lacks a closing bracket.
int QRegExp::match ( const QString & str, int index=0, int *
len=0, bool indexIsStart = TRUE ) const
Attempts to match in str, starting from position index.
Returns the position of the match, or -1 if there was no
match.
If len is not a null pointer, the length of the match is
stored in *len.
If indexIsStart is TRUE (the default), the position index
in the string will match the start-of-input primitive (^)
in the regexp, if present. Otherwise, position 0 in str
will match.
Example:
QRegExp r("[0-9]*\\.[0-9]+"); // matches floating point
int len;
r.match("pi = 3.1416", 0, &len); // returns 5, len == 6
\note In Qt 3.0, this function will be replaced by find().
Examples: qmag/qmag.cpp
bool QRegExp::operator!= ( const QRegExp & r ) const
Returns TRUE if this regexp is not equal to r.
QRegExp & QRegExp::operator= ( const QString & pattern )
This function is obsolete. It is provided to keep old
source working, and will probably be removed in a future
version of Qt. We strongly advise against using it in new
code.
Consider using setPattern() instead of this method.
Sets the pattern string to pattern and returns a reference
to this regexp. The case sensitivity or wildcard options
do not change.
QRegExp & QRegExp::operator= ( const QRegExp & r )
Copies the regexp r and returns a reference to this
regexp. The case sensitivity and wildcard options are
copied, as well.
bool QRegExp::operator== ( const QRegExp & r ) const
Returns TRUE if this regexp is equal to r.
Two regexp objects are equal if they have equal pattern
strings, case sensitivity options and wildcard options.
QString QRegExp::pattern () const
Returns the pattern string of the regexp.
void QRegExp::setCaseSensitive ( bool enable )
Enables or disables case sensitive matching.
In case sensitive mode, "a.e" matches "axe" but not "Axe".
See also: caseSensitive().
void QRegExp::setPattern ( const QString & pattern )
Sets the pattern string to pattern and returns a reference
to this regexp. The case sensitivity or wildcard options
do not change.
void QRegExp::setWildcard ( bool wildcard )
Sets the wildcard option for the regular expression. The
default is FALSE.
Setting wildcard to TRUE makes it convenient to match
filenames instead of plain text.
For example, "qr*.cpp" matches the string "qregexp.cpp" in
wildcard mode, but not "qicpp" (which would be matched in
normal mode).
See also wildcard().
Returns TRUE if wildcard mode is on, otherwise FALSE.
See also setWildcard().
void QRegExp::compile () [protected]
For internal use only.
const QChar * QRegExp::matchstr ( uint * rxd, const QChar * str,
uint strlength, const QChar * bol ) const [protected]
For internal use only.
SEE ALSO
http://doc.trolltech.com/qregexp.html
http://www.trolltech.com/faq/tech.html
COPYRIGHT
Copyright 1992-2001 Trolltech AS,
http://www.trolltech.com. See the license file included
in the distribution for a complete license statement.
AUTHOR
Generated automatically from the source code.
BUGS
If you find a bug in Qt, please report it as described in
http://doc.trolltech.com/bughowto.html. Good bug reports
make our job much simpler. Thank you.
In case of content or formattting problems with this
manual page, please report them to qt-bugs@trolltech.com.
Please include the name of the manual page (qregexp.3qt)
and the Qt version (2.3.1).
Man(1) output converted with
man2html