sane-sm3600 - SANE backend for Microtek scanners M011 USB
chip
DESCRIPTION
The sane-sm3600 library implements a SANE (Scanner Access
Now Easy) backend that provides access to some Microtek
scanners with the Toshiba M011 custom USB chip. This
backend should be considered alpha.
There exist a backends for Microtek scanners with SCSI
command set. Refer to sane-microtek(5) and sane-
microtek2(5) for details.
At present, the following scanners are known positively to
work with this backend:
Vendor Product id: Remark:
-------- -------------- -----------
Microtek ScanMaker 3600 all modes ok
If you own a Microtek scanner with the M011 chip other
than the ones listed above, it may or may not work with
SANE!
FRONTEND OPTIONS
This backend dynamically enables the options for the fron
tend, that are supported by the scanner in dependence of
the scanning-mode and other options. Not supported options
are disabled.
The following options are supported by the
Microtek2-driver:
Color, grayscale, halftone and lineart scans.
contrast, brightness, control, gamma correction.
DEVICE NAMES
This backend does not support device names in a usable
form.
CONFIGURATION
This backend does not support a configuration file right
now.
FILES
/usr/lib/sane/libsane-sm3600.a
The static library implementing this backend.
The shared library implementing this backend (pre
sent on systems that support dynamic loading).
ENVIRONMENT
SANE_DEBUG_SM3600
If the library was compiled with debug support
enabled, this environment variable controls the
debug level for this backend. E.g., a value of 128
requests all debug output to be printed. Smaller
levels reduce verbosity. To see error messages on
stderr set SANE_DEBUG_SM3600 to 1.
E.g. just say:
export SANE_DEBUG_SM3600=5
SEE ALSO
sane(7), sane-microtek2(5)
AUTHOR
Marian Eichholz (eichholz@computer.org)
Glenn Ramsey (glenn@componic.com)
Man(1) output converted with
man2html