vboxgetty.conf - config file for vboxgetty


Description

       The  file  /etc/isdn/vboxgetty.conf  is  used to configure
       vboxgetty. Please read the man  page  vboxgetty(8)  for  a
       description of how vboxgetty works.

       Everything  after  "#" is ignored, as are empty lines. All
       arguments must be separated by whitespace (spaces,  tabs).
       Arguments may not contain whitespace.

       All settings before the first port command are global set­
       tings, after a port command they only affect  the  current
       port.

       port <string>
              ISDN device to configure.

       modeminit <string>
              Command to initialize the modem. You should set the
              MSN/EAZ on which vboxgetty should listen for incom­
              ing calls. Default is "ATZ".

       user <string>
              Name of the user that vboxgetty will use. This user
              must exist in /etc/passwd and  you  must  use  this
              parameter.

       group <string>
              Name  of  the  group  that vboxgetty will use. This
              group must exist in /etc/group  and  you  must  use
              this parameter.

       umask <number>
              Vboxgetty  will  use  this  umask when creating new
              files. You must give the umask as an octal  number.
              Default is 077.

       dropdtrtime <seconds>
              Number  of milliseconds to hold the DTR-Line low to
              reset the modem.  Default value is 800.

       initpause <number>
              Number of milliseconds to wait  after  initializing
              the  modem. This is used to compensate the delay of
              the "NO CARRIER" response. Default value is 1500.

       badinitsexit <number>
              Maximum failures with modeminit. If this number  is
              reached, vboxgetty exits. Default is 0.

              Time  in  seconds to wait for a RING. If no RING is
              received  within  this  time,  no  call  is  taken.
              Default is 5.

       echotimeout <number>
              Time  in  seconds  to  wait  for  the echo from the
              modem. Default is 4.

       commandtimeout <number>
              Time in seconds to wait for a response to  a  modem
              command. Default is 4.

       alivetimeout <number>
              After  this time in seconds vboxgetty will check if
              the modem is still responding  to  modem  commands.
              Default is 1800.

       compression <string>
              Audio  compression  to  use to record new messages.
              Possible values are ADPCM-2, ADPCM-3,  ADPCM-4  and
              ULAW.  The  ALAW compression mode is no longer sup­
              ported. Default is ULAW.

       spooldir <string>
              Spool directory to use. This directory must  exist.
              It's  used  for  control files of several programs.
              Default is /var/spool/vbox/<user>.

       vboxconfig <string>
              Full path of the vbox config file. Default value is
              <spooldir>/vbox.conf.

       freespace <number>
              Number  of bytes that must be available on the par­
              tition with the spool directory, so that a call may
              be taken. Default is 0.


FILES

       /etc/isdn/vboxgetty.conf
              this configuration file


SEE ALSO

       vboxgetty(8), vbox(5), vboxtcl(5)


AUTHOR

       This  manual  page  was  written  by  Andreas  Jellinghaus
       <aj@dungeon.inka.de>, for Debian GNU/Linux and isdn4linux.


Man(1) output converted with man2html