ZTRMM - perform one of the matrix-matrix operations B :=
alpha*op( A )*B, or B := alpha*B*op( A ) where alpha is a
scalar, B is an m by n matrix, A is a unit, or non-unit,
upper or lower triangular matrix and op( A ) is one of
op( A ) = A or op( A ) = A' or op( A ) = conjg( A' )
SYNOPSIS
SUBROUTINE ZTRMM ( SIDE, UPLO, TRANSA, DIAG, M, N, ALPHA,
A, LDA, B, LDB )
CHARACTER*1 SIDE, UPLO, TRANSA, DIAG
INTEGER M, N, LDA, LDB
COMPLEX*16 ALPHA
COMPLEX*16 A( LDA, * ), B( LDB, * )
PURPOSE
ZTRMM performs one of the matrix-matrix operations
PARAMETERS
SIDE - CHARACTER*1.
On entry, SIDE specifies whether op( A ) multi
plies B from the left or right as follows:
SIDE = 'L' or 'l' B := alpha*op( A )*B.
SIDE = 'R' or 'r' B := alpha*B*op( A ).
Unchanged on exit.
UPLO - CHARACTER*1.
On entry, UPLO specifies whether the matrix A is an
upper or lower triangular matrix as follows:
UPLO = 'U' or 'u' A is an upper triangular
matrix.
UPLO = 'L' or 'l' A is a lower triangular matrix.
Unchanged on exit.
TRANSA - CHARACTER*1. On entry, TRANSA specifies
the form of op( A ) to be used in the matrix multi
plication as follows:
TRANSA = 'N' or 'n' op( A ) = A.
TRANSA = 'T' or 't' op( A ) = A'.
TRANSA = 'C' or 'c' op( A ) = conjg( A' ).
DIAG - CHARACTER*1.
On entry, DIAG specifies whether or not A is unit
triangular as follows:
DIAG = 'U' or 'u' A is assumed to be unit trian
gular.
DIAG = 'N' or 'n' A is not assumed to be unit
triangular.
Unchanged on exit.
M - INTEGER.
On entry, M specifies the number of rows of B. M
must be at least zero. Unchanged on exit.
N - INTEGER.
On entry, N specifies the number of columns of B.
N must be at least zero. Unchanged on exit.
ALPHA - COMPLEX*16 .
On entry, ALPHA specifies the scalar alpha. When
alpha is zero then A is not referenced and B need
not be set before entry. Unchanged on exit.
A - COMPLEX*16 array of DIMENSION ( LDA, k ),
where k is m
when SIDE = 'L' or 'l' and is n when SIDE =
'R' or 'r'. Before entry with UPLO = 'U' or 'u',
the leading k by k upper triangular part of the
array A must contain the upper triangular matrix
and the strictly lower triangular part of A is not
referenced. Before entry with UPLO = 'L' or 'l',
the leading k by k lower triangular part of the
array A must contain the lower triangular matrix
and the strictly upper triangular part of A is not
referenced. Note that when DIAG = 'U' or 'u',
the diagonal elements of A are not referenced
either, but are assumed to be unity. Unchanged
on exit.
LDA - INTEGER.
On entry, LDA specifies the first dimension of A as
declared in the calling (sub) program. When SIDE
= 'L' or 'l' then LDA must be at least max( 1, m
), when SIDE = 'R' or 'r' then LDA must be at
least max( 1, n ). Unchanged on exit.
B - COMPLEX*16 array of DIMENSION ( LDB, n ).
Before entry, the leading m by n part of the
array B must contain the matrix B, and on exit
is overwritten by the transformed matrix.
On entry, LDB specifies the first dimension of B as
declared in the calling (sub) program. LDB
must be at least max( 1, m ). Unchanged on
exit.
Level 3 Blas routine.
-- Written on 8-February-1989. Jack Dongarra,
Argonne National Laboratory. Iain Duff, AERE Har
well. Jeremy Du Croz, Numerical Algorithms Group
Ltd. Sven Hammarling, Numerical Algorithms Group
Ltd.
Man(1) output converted with
man2html