NAME

       binary - Insert and extract fields from binary strings


SYNOPSIS

       binary format formatString ?arg arg ...?
       binary scan string formatString ?varName varName ...?
_________________________________________________________________


DESCRIPTION

       This  command  provides facilities for manipulating binary
       data.  The first form, binary  format,  creates  a  binary
       string  from  normal  Tcl  values.  For example, given the
       values 16 and 22, on a 32 bit architecture, it might  pro­
       duce  an  8-byte  binary  string  consisting of two 4-byte
       integers, one for each of the numbers.  The second form of
       the  command,  binary scan, does the opposite: it extracts
       data from a binary string and returns it as  ordinary  Tcl
       string values.


BINARY FORMAT

       The  binary format command generates a binary string whose
       layout is specified by the formatString and whose contents
       come  from the additional arguments.  The resulting binary
       value is returned.

       The formatString consists of a sequence of  zero  or  more
       field  specifiers  separated by zero or more spaces.  Each
       field specifier is a single type character followed by  an
       optional numeric count.  Most field specifiers consume one
       argument to obtain the value to be  formatted.   The  type
       character specifies how the value is to be formatted.  The
       count typically indicates how many items of the  specified
       type are taken from the value.  If present, the count is a
       non-negative decimal integer or *,  which  normally  indi­
       cates  that  all of the items in the value are to be used.
       If the number of arguments does not match  the  number  of
       fields  in  the format string that consume arguments, then
       an error is generated.

       Each type-count pair moves an imaginary cursor through the
       binary  data,  storing  bytes  at the current position and
       advancing the cursor to just after the last  byte  stored.
       The  cursor is initially at position 0 at the beginning of
       the data.  The type may be any one of the following  char­
       acters:

       a    Stores a character string of length count in the out­
            put string.  If arg has fewer than count bytes,  then
            additional  zero bytes are used to pad out the field.
            If arg is longer than the specified length, the extra

            of the bytes in arg will be formatted.  If  count  is
            omitted,  then  one character will be formatted.  For
            example,
                   binary format a7a*a alpha bravo charlie
            will    return     a     string     equivalent     to
            alpha\000\000bravoc.

       A    This  form  is  the  same as a except that spaces are
            used for padding instead of nulls.  For example,
                   binary format A6A*A alpha bravo charlie
            will return alpha bravoc.

       b    Stores a string of count binary digits in low-to-high
            order  within  each  byte  in the output string.  Arg
            must contain a sequence of 1 and 0  characters.   The
            resulting  bytes  are  emitted in first to last order
            with the bits being formatted  in  low-to-high  order
            within  each  byte.  If arg has fewer than count dig­
            its, then zeros will be used for the remaining  bits.
            If  arg has more than the specified number of digits,
            the extra digits will be ignored.   If  count  is  *,
            then  all of the digits in arg will be formatted.  If
            count is omitted, then one digit will  be  formatted.
            If  the  number  of  bits formatted does not end at a
            byte boundary, the remaining bits of  the  last  byte
            will be zeros.  For example,
                   binary format b5b* 11100 111000011010
            will return a string equivalent to \x07\x87\x05.

       B    This  form  is the same as b except that the bits are
            stored in high-to-low order within  each  byte.   For
            example,
                   binary format B5B* 11100 111000011010
            will return a string equivalent to \xe0\xe1\xa0.

       h    Stores  a  string of count hexadecimal digits in low-
            to-high within each byte in the output  string.   Arg
            must  contain  a  sequence  of  characters in the set
            ``0123456789abcdefABCDEF''.  The resulting bytes  are
            emitted  in  first  to last order with the hex digits
            being formatted  in  low-to-high  order  within  each
            byte.  If arg has fewer than count digits, then zeros
            will be used for the remaining digits.   If  arg  has
            more  than  the specified number of digits, the extra
            digits will be ignored.  If count is *, then  all  of
            the  digits  in  arg  will be formatted.  If count is
            omitted, then one digit will be  formatted.   If  the
            number  of  digits  formatted  does not end at a byte
            boundary, the remaining bits of the last byte will be
            zeros.  For example,
                   binary format h3h* AB def
            will  return a string equivalent to \xba\x00\xed\x0f.

            stored  in  high-to-low  order within each byte.  For
            example,
                   binary format H3H* ab DEF
            will return a string equivalent to  \xab\x00\xde\xf0.

       c    Stores one or more 8-bit integer values in the output
            string.  If no count is specified, then arg must con­
            sist  of an integer value; otherwise arg must consist
            of a list containing at least count integer elements.
            The  low-order 8 bits of each integer are stored as a
            one-byte value at the cursor position.  If  count  is
            *,  then  all of the integers in the list are format­
            ted.  If the number of elements in the list is  fewer
            than  count, then an error is generated.  If the num­
            ber of elements in the list is  greater  than  count,
            then the extra elements are ignored.  For example,
                   binary format c3cc* {3 -3 128 1} 260 {2 5}
            will     return     a     string     equivalent    to
            \x03\xfd\x80\x04\x02\x05, whereas
                   binary format c {2 5}
            will generate an error.

       s    This form is the same as c except that it stores  one
            or  more  16-bit integers in little-endian byte order
            in the output string.  The low-order 16-bits of  each
            integer  are stored as a two-byte value at the cursor
            position  with  the  least  significant  byte  stored
            first.  For example,
                   binary format s3 {3 -3 258 1}
            will     return     a     string     equivalent    to
            \x03\x00\xfd\xff\x02\x01.

       S    This form is the same as s except that it stores  one
            or  more  16-bit integers in big-endian byte order in
            the output string.  For example,
                   binary format S3 {3 -3 258 1}
            will    return     a     string     equivalent     to
            \x00\x03\xff\xfd\x01\x02.

       i    This  form is the same as c except that it stores one
            or more 32-bit integers in little-endian  byte  order
            in  the output string.  The low-order 32-bits of each
            integer are stored as a four-byte value at the cursor
            position  with  the  least  significant  byte  stored
            first.  For example,
                   binary format i3 {3 -3 65536 1}
            will    return     a     string     equivalent     to
            \x03\x00\x00\x00\xfd\xff\xff\xff\x00\x00\x01\x00

       I    This  form is the same as i except that it stores one
            or more one or more  32-bit  integers  in  big-endian
            byte order in the output string.  For example,
                   binary format I3 {3 -3 65536 1}

            \x00\x00\x00\x03\xff\xff\xff\xfd\x00\x01\x00\x00

       f    This form is the same as c except that it stores  one
            or  more one or more single-precision floating in the
            machine's native representation in the output string.
            This  representation is not portable across architec­
            tures, so it should not be used to communicate float­
            ing  point numbers across the network.  The size of a
            floating point number may vary across  architectures,
            so  the  number of bytes that are generated may vary.
            If the value overflows the machine's native represen­
            tation,  then  the value of FLT_MAX as defined by the
            system will be used instead.  Because Tcl  uses  dou­
            ble-precision   floating-point   numbers  internally,
            there may be some loss of precision in the conversion
            to  single-precision.  For example, on a Windows sys­
            tem running on an Intel Pentium processor,
                   binary format f2 {1.6 3.4}
            will    return     a     string     equivalent     to
            \xcd\xcc\xcc\x3f\x9a\x99\x59\x40.

       d    This  form is the same as f except that it stores one
            or more one or more double-precision floating in  the
            machine's native representation in the output string.
            For example, on a Windows system running on an  Intel
            Pentium processor,
                   binary format d1 {1.6}
            will     return     a     string     equivalent    to
            \x9a\x99\x99\x99\x99\x99\xf9\x3f.

       x    Stores count null bytes in  the  output  string.   If
            count  is  not  specified,  stores one null byte.  If
            count is *, generates an error.  This type  does  not
            consume an argument.  For example,
                   binary format a3xa3x2a3 abc def ghi
            will     return     a     string     equivalent    to
            abc\000def\000\000ghi.

       X    Moves the cursor  back  count  bytes  in  the  output
            string.   If count is * or is larger than the current
            cursor position, then the  cursor  is  positioned  at
            location  0  so that the next byte stored will be the
            first byte in the result string.  If count is omitted
            then  the  cursor  is moved back one byte.  This type
            does not consume an argument.  For example,
                   binary format a3X*a3X2a3 abc def ghi
            will return dghi.

       @    Moves the cursor to the absolute location in the out­
            put  string specified by count.  Position 0 refers to
            the first byte in the output string.  If count refers
            to  a  position  beyond  the last byte stored so far,
            then null bytes will be  placed  in  the  unitialized

            fied location.  If count is *,  then  the  cursor  is
            moved  to  the  current end of the output string.  If
            count is omitted, then an error  will  be  generated.
            This type does not consume an argument. For example,
                   binary format a5@2a1@*a3@10a1 abcde f ghi j
            will return abfdeghi\000\000j.


BINARY SCAN

       The  binary  scan  command  parses  fields  from  a binary
       string, returning the  number  of  conversions  performed.
       String gives the input to be parsed and formatString indi­
       cates how to parse it.  Each varName gives the name  of  a
       variable;  when  a field is scanned from string the result
       is assigned to the corresponding variable.

       As with binary format,  the  formatString  consists  of  a
       sequence  of  zero  or  more field specifiers separated by
       zero or more spaces.  Each field  specifier  is  a  single
       type  character  followed  by  an  optional numeric count.
       Most field specifiers consume one argument to  obtain  the
       variable  into  which the scanned values should be placed.
       The type character specifies how the binary data is to  be
       interpreted.  The count typically indicates how many items
       of the specified type are taken from the  data.   If  pre­
       sent,  the  count  is a non-negative decimal integer or *,
       which normally indicates that all of the  remaining  items
       in the data are to be used.  If there are not enough bytes
       left after the current cursor position to satisfy the cur­
       rent  field  specifier, then the corresponding variable is
       left untouched and binary scan  returns  immediately  with
       the  number  of variables that were set.  If there are not
       enough arguments for all  of  the  fields  in  the  format
       string that consume arguments, then an error is generated.

       It is important to note that the c, s, and S (and i and  I
       on 64bit systems) will be scanned into long data size val­
       ues.  In doing this, values that have their high  bit  set
       (0x80  for chars, 0x8000 for shorts, 0x80000000 for ints),
       will be sign extended.  Thus the following will occur:
              set signShort [binary format s1 0x8000]
              binary scan $signShort s1 val; # val == 0xFFFF8000
       If you want to produce an unsigned  value,  then  you  can
       mask  the  return value to the desired size.  For example,
       to produce an unsigned short value:
              set val [expr {$val & 0xFFFF}]; # val == 0x8000

       Each type-count pair moves an imaginary cursor through the
       binary data, reading bytes from the current position.  The
       cursor is initially at position 0 at the beginning of  the
       data.   The  type  may be any one of the following charac­
       ters:

            count is *, then all of the remaining bytes in string
            will be scanned into the variable.  If count is omit­
            ted,  then  one character will be scanned.  For exam­
            ple,
                   binary scan abcde\000fghi a6a10 var1 var2
            will return 1 with the string equivalent to abcde\000
            stored in var1 and var2 left unmodified.

       A    This  form  is  the same as a, except trailing blanks
            and nulls are stripped from the scanned value  before
            it is stored in the variable.  For example,
                   binary scan "abc efghi  \000" A* var1
            will return 1 with abc efghi stored in var1.

       b    The data is turned into a string of count binary dig­
            its in low-to-high order represented as a sequence of
            ``1''  and  ``0''  characters.   The  data  bytes are
            scanned in first to last order with  the  bits  being
            taken  in  low-to-high  order  within each byte.  Any
            extra bits in the last byte are ignored.  If count is
            *,  then  all of the remaining bits in string will be
            scanned.  If count is omitted, then one bit  will  be
            scanned.  For example,
                   binary scan \x07\x87\x05 b5b* var1 var2
            will   return   2  with  11100  stored  in  var1  and
            1110000110100000 stored in var2.

       B    This form is the same as b, except the bits are taken
            in high-to-low order within each byte.  For example,
                   binary scan \x70\x87\x05 B5B* var1 var2
            will   return   2  with  01110  stored  in  var1  and
            1000011100000101 stored in var2.

       h    The data is turned into a string of count hexadecimal
            digits in low-to-high order represented as a sequence
            of characters in the set  ``0123456789abcdef''.   The
            data  bytes  are  scanned in first to last order with
            the hex  digits  being  taken  in  low-to-high  order
            within  each  byte.   Any extra bits in the last byte
            are ignored.  If count is *, then all of the  remain­
            ing  hex  digits in string will be scanned.  If count
            is omitted, then one hex digit will be scanned.   For
            example,
                   binary scan \x07\x86\x05 h3h* var1 var2
            will  return  2 with 706 stored in var1 and 50 stored
            in var2.

       H    This form is the same as h,  except  the  digits  are
            taken  in  high-to-low  order  within each byte.  For
            example,
                   binary scan \x07\x86\x05 H3H* var1 var2
            will return 2 with 078 stored in var1 and  05  stored
            in var2.

            and stored in the corresponding variable as  a  list.
            If  count  is  *,  then all of the remaining bytes in
            string will be scanned.  If count  is  omitted,  then
            one 8-bit integer will be scanned.  For example,
                   binary scan \x07\x86\x05 c2c* var1 var2
            will return 2 with 7 -122 stored in var1 and 5 stored
            in var2.  Note that the integers returned are signed,
            but  they  can be converted to unsigned 8-bit quanti­
            ties using an expression like:
                   expr ( $num + 0x100 ) % 0x100

       s    The data is interpreted as count 16-bit signed  inte­
            gers  represented  in  little-endian byte order.  The
            integers are stored in the corresponding variable  as
            a  list.   If  count  is *, then all of the remaining
            bytes in string will be scanned.  If count  is  omit­
            ted,  then  one  16-bit integer will be scanned.  For
            example,
                   binary scan \x05\x00\x07\x00\xf0\xff s2s* var1 var2
            will return 2 with 5 7 stored in var1 and -16  stored
            in var2.  Note that the integers returned are signed,
            but they can be converted to unsigned 16-bit  quanti­
            ties using an expression like:
                   expr ( $num + 0x10000 ) % 0x10000

       S    This  form  is  the same as s except that the data is
            interpreted as count 16-bit  signed  integers  repre­
            sented in big-endian byte order.  For example,
                   binary scan \x00\x05\x00\x07\xff\xf0 S2S* var1 var2
            will  return 2 with 5 7 stored in var1 and -16 stored
            in var2.

       i    The data is interpreted as count 32-bit signed  inte­
            gers  represented  in  little-endian byte order.  The
            integers are stored in the corresponding variable  as
            a  list.   If  count  is *, then all of the remaining
            bytes in string will be scanned.  If count  is  omit­
            ted,  then  one  32-bit integer will be scanned.  For
            example,
                   binary scan \x05\x00\x00\x00\x07\x00\x00\x00\xf0\xff\xff\xff i2i* var1 var2
            will return 2 with 5 7 stored in var1 and -16  stored
            in  var2.  Note that the integers returned are signed
            and cannot be represented by Tcl as unsigned  values.

       I    This  form  is  the same as I except that the data is
            interpreted as count 32-bit  signed  integers  repre­
            sented in big-endian byte order.  For example,
                   binary \x00\x00\x00\x05\x00\x00\x00\x07\xff\xff\xff\xf0 I2I* var1 var2
            will  return 2 with 5 7 stored in var1 and -16 stored
            in var2.

       f    The data is  interpreted  as  count  single-precision
            floating   point  numbers  in  the  machine's  native

            stored  in  the corresponding variable as a list.  If
            count is *, then all of the remaining bytes in string
            will  be scanned.  If count is omitted, then one sin­
            gle-precision floating point number will be  scanned.
            The  size  of a floating point number may vary across
            architectures,  so  the  number  of  bytes  that  are
            scanned  may  vary.  If the data does not represent a
            valid floating point number, the resulting  value  is
            undefined  and compiler dependent.  For example, on a
            Windows system running on an Intel Pentium processor,
                   binary scan \x3f\xcc\xcc\xcd f var1
            will return 1 with 1.6000000238418579 stored in var1.

       d    This form is the same as f except that  the  data  is
            interpreted  as count double-precision floating point
            numbers in the machine's native  representation.  For
            example, on a Windows system running on an Intel Pen­
            tium processor,
                   binary scan \x9a\x99\x99\x99\x99\x99\xf9\x3f d var1
            will return 1 with 1.6000000000000001 stored in var1.

       x    Moves  the  cursor forward count bytes in string.  If
            count is * or is larger  than  the  number  of  bytes
            after  the  current  cursor cursor position, then the
            cursor is positioned after the last byte  in  string.
            If count is omitted, then the cursor is moved forward
            one byte.  Note that this type does  not  consume  an
            argument.  For example,
                   binary scan \x01\x02\x03\x04 x2H* var1
            will return 1 with 0304 stored in var1.

       X    Moves  the  cursor  back  count  bytes in string.  If
            count is * or is larger than the current cursor posi­
            tion,  then the cursor is positioned at location 0 so
            that the next byte scanned will be the first byte  in
            string.  If count is omitted then the cursor is moved
            back one byte.  Note that this type does not  consume
            an argument.  For example,
                   binary scan \x01\x02\x03\x04 c2XH* var1 var2
            will  return  2  with  1  2 stored in var1 and 020304
            stored in var2.

       @    Moves the cursor to the absolute location in the data
            string  specified  by  count.   Note  that position 0
            refers to the first byte in string.  If count  refers
            to a position beyond the end of string, then the cur­
            sor is positioned after the last byte.  If  count  is
            omitted,  then an error will be generated.  For exam­
            ple,
                   binary scan \x01\x02\x03\x04 c2@1H* var1 var2
            will return 2 with 1 2  stored  in  var1  and  020304
            stored in var2.

       Sometimes it is desirable to format or scan integer values
       in the native byte order for the machine.   Refer  to  the
       byteOrder  element  of  the  tcl_platform  array to decide
       which type character to use when  formatting  or  scanning
       integers.


SEE ALSO

       format(n), scan(n), tclvars(n)


KEYWORDS

       binary, format, scan


Man(1) output converted with man2html