NAME

       checkbutton - Create and manipulate checkbutton widgets


SYNOPSIS

       checkbutton pathName ?options?


STANDARD OPTIONS

       -activebackground     -cursor              -highlightthickness-takefocus
       -activeforeground     -disabledforeground  -image-text
       -anchor               -font                -justify-textvariable
       -background           -foreground          -padx-underline
       -bitmap               -highlightbackground -pady-wraplength
       -borderwidth          -highlightcolor      -relief

       See  the  options manual entry for details on the standard
       options.


WIDGET-SPECIFIC OPTIONS

       Command-Line Name:-command
       Database Name:  command
       Database Class: Command

              Specifies a Tcl command to associate with the  but­
              ton.   This command is typically invoked when mouse
              button 1 is released over the button  window.   The
              button's global variable (-variable option) will be
              updated before the command is invoked.

       Command-Line Name:-height
       Database Name:  height
       Database Class: Height

              Specifies a desired height for the button.   If  an
              image  or  bitmap  is being displayed in the button
              then the value is in screen units (i.e. any of  the
              forms  acceptable  to Tk_GetPixels); for text it is
              in lines of text.  If this option isn't  specified,
              the  button's  desired  height is computed from the
              size of the image or bitmap or text being displayed
              in it.

       Command-Line Name:-indicatoron
       Database Name:  indicatorOn
       Database Class: IndicatorOn

              Specifies  whether  or  not the indicator should be
              drawn.  Must be a proper boolean value.  If  false,
              the  relief  option  is  ignored  and  the widget's
              relief is always sunken if the widget  is  selected
              and raised otherwise.

       Command-Line Name:-offvalue

       Database Class: Value

              Specifies value to store in the button's associated
              variable  whenever  this  button   is   deselected.
              Defaults to ``0''.

       Command-Line Name:-onvalue
       Database Name:  onValue
       Database Class: Value

              Specifies value to store in the button's associated
              variable  whenever   this   button   is   selected.
              Defaults to ``1''.

       Command-Line Name:-selectcolor
       Database Name:  selectColor
       Database Class: Background

              Specifies a background color to use when the button
              is selected.  If indicatorOn is true then the color
              applies  to  the  indicator.   Under  Windows, this
              color is used as the background for  the  indicator
              regardless  of the select state.  If indicatorOn is
              false, this color is used as the background for the
              entire  widget,  in  place of background or active­
              Background, whenever the widget  is  selected.   If
              specified  as an empty string then no special color
              is used for displaying when the widget is selected.

       Command-Line Name:-selectimage
       Database Name:  selectImage
       Database Class: SelectImage

              Specifies  an  image  to  display  (in place of the
              image option) when  the  checkbutton  is  selected.
              This  option is ignored unless the image option has
              been specified.

       Command-Line Name:-state
       Database Name:  state
       Database Class: State

              Specifies one of three states for the  checkbutton:
              normal,  active,  or disabled.  In normal state the
              checkbutton is displayed using the  foreground  and
              background  options.  The active state is typically
              used when the pointer is over the checkbutton.   In
              active state the checkbutton is displayed using the
              activeForeground  and   activeBackground   options.
              Disabled state means that the checkbutton should be
              insensitive:  the default bindings will  refuse  to
              activate  the  widget  and will ignore mouse button
              presses.  In this state the disabledForeground  and

              displayed.

       Command-Line Name:-variable
       Database Name:  variable
       Database Class: Variable

              Specifies name of global variable to set  to  indi­
              cate  whether  or  not  this  button  is  selected.
              Defaults to the name of the button within its  par­
              ent  (i.e.  the last element of the button window's
              path name).

       Command-Line Name:-width
       Database Name:  width
       Database Class: Width

              Specifies a desired width for the  button.   If  an
              image  or  bitmap  is being displayed in the button
              then the value is in screen units (i.e. any of  the
              forms  acceptable  to Tk_GetPixels); for text it is
              in characters.  If this option isn't specified, the
              button's desired width is computed from the size of
              the image or bitmap or text being displayed in  it.
_________________________________________________________________


DESCRIPTION

       The checkbutton command creates a new window (given by the
       pathName argument) and makes it into a checkbutton widget.
       Additional  options,  described above, may be specified on
       the command line or in the option  database  to  configure
       aspects of the checkbutton such as its colors, font, text,
       and initial relief.  The checkbutton command  returns  its
       pathName  argument.   At the time this command is invoked,
       there must not exist a window named  pathName,  but  path­
       Name's parent must exist.

       A  checkbutton is a widget that displays a textual string,
       bitmap or image and a square called an indicator.  If text
       is  displayed, it must all be in a single font, but it can
       occupy multiple lines on the screen (if it  contains  new­
       lines  or  if  wrapping  occurs  because of the wrapLength
       option) and one of the characters may optionally be under­
       lined  using  the underline option.  A checkbutton has all
       of the behavior of a simple button, including the  follow­
       ing:  it  can  display itself in either of three different
       ways, according to the state option; it  can  be  made  to
       appear  raised,  sunken, or flat; it can be made to flash;
       and it invokes a Tcl command whenever mouse  button  1  is
       clicked over the checkbutton.

       In addition, checkbuttons can be selected.  If a checkbut­
       ton is selected then the indicator is normally drawn  with |

       the checkbutton is set to a particular value (normally 1). |
       Under  Unix,  the  indicator is drawn with a sunken relief |
       and a special color.   Under  Windows,  the  indicator  is |
       drawn with a check mark inside.  If the checkbutton is not |
       selected, then the indicator is drawn  with  a  deselected |
       appearance,  and  the associated variable is set to a dif­ |
       ferent value (typically 0).  Under Unix, the indicator  is |
       drawn  with  a  raised relief and no special color.  Under |
       Windows, the indicator  is  drawn  without  a  check  mark |
       inside.   By  default, the name of the variable associated
       with a checkbutton is the same as the name used to  create
       the  checkbutton.   The  variable name, and the ``on'' and
       ``off'' values stored in it, may be modified with  options
       on the command line or in the option database.  Configura­
       tion options may also be used to modify the way the  indi­
       cator  is  displayed  (or whether it is displayed at all).
       By default a checkbutton is configured to select and dese­
       lect itself on alternate button clicks.  In addition, each
       checkbutton monitors its associated variable and automati­
       cally  selects  and  deselects  itself  when the variables
       value changes to and from the button's ``on'' value.


WIDGET COMMAND

       The checkbutton command creates a new  Tcl  command  whose
       name is pathName.  This command may be used to invoke var­
       ious operations on the widget.  It has the following  gen­
       eral form:
              pathName option ?arg arg ...?
       Option  and  the  args determine the exact behavior of the
       command.  The following commands are possible  for  check­
       button widgets:

       pathName cget option
              Returns  the  current  value  of  the configuration
              option given by option.  Option may have any of the
              values accepted by the checkbutton command.

       pathName configure ?option? ?value option value ...?
              Query  or  modify  the configuration options of the
              widget.  If no option is specified, returns a  list
              describing  all  of the available options for path­
              Name (see Tk_ConfigureInfo for information  on  the
              format  of this list).  If option is specified with
              no value, then the command returns a list  describ­
              ing the one named option (this list will be identi­
              cal to  the  corresponding  sublist  of  the  value
              returned  if  no  option  is specified).  If one or
              more option-value pairs  are  specified,  then  the
              command modifies the given widget option(s) to have
              the given  value(s);   in  this  case  the  command
              returns  an  empty  string.  Option may have any of
              the values accepted by the checkbutton command.

              Deselects the checkbutton and sets  the  associated
              variable to its ``off'' value.

       pathName flash
              Flashes  the  checkbutton.  This is accomplished by
              redisplaying the checkbutton several times,  alter­
              nating  between  active  and normal colors.  At the
              end of the flash the checkbutton  is  left  in  the
              same  normal/active  state  as when the command was
              invoked.  This command is ignored if the  checkbut­
              ton's state is disabled.

       pathName invoke
              Does  just  what  would  have  happened if the user
              invoked the checkbutton with the mouse: toggle  the
              selection  state  of  the button and invoke the Tcl
              command associated with the checkbutton,  if  there
              is  one.  The return value is the return value from
              the Tcl command, or an empty string if there is  no
              command associated with the checkbutton.  This com­
              mand is ignored if the checkbutton's state is  dis­
              abled.

       pathName select
              Selects  the  checkbutton  and  sets the associated
              variable to its ``on'' value.

       pathName toggle
              Toggles the selection state of the  button,  redis­
              playing it and modifying its associated variable to
              reflect the new state.


BINDINGS

       Tk automatically creates class bindings  for  checkbuttons
       that give them the following default behavior:             |

       [1]                                                               ||
              On Unix systems, a checkbutton  activates  whenever |
              the  mouse  passes over it and deactivates whenever |
              the mouse leaves the checkbutton.  On Mac and  Win­ |
              dows systems, when mouse button 1 is pressed over a |
              checkbutton,  the  button  activates  whenever  the |
              mouse pointer is inside the button, and deactivates |
              whenever the mouse pointer leaves the button.

       [2]    When mouse button 1 is pressed over a  checkbutton,
              it  is invoked (its selection state toggles and the
              command associated with the button is  invoked,  if
              there is one).                                      |

       [3]                                                               ||
              When a checkbutton has the input focus,  the  space |

              Windows, there are additional  key  bindings;  plus |
              (+)  and equal (=) select the button, and minus (-) |
              deselects the button.

       If the checkbutton's state is disabled then  none  of  the
       above  actions  occur:  the checkbutton is completely non-
       responsive.

       The behavior of checkbuttons can be  changed  by  defining
       new  bindings  for individual widgets or by redefining the
       class bindings.


KEYWORDS

       checkbutton, widget


Man(1) output converted with man2html