[Prev][Next][Index][Thread]

Re: New Holland 268 Baler Problem



Eur Ings Gore wrote:

> 
>         It produces bales with too little straw on the side furthest from
>         the packers.

>         I have tried adjusting the packer tynes but it does not appear to
>         alter the "feature".


Unless I'm mistaken you're on the right track with the packer tines (I 
assume you mean the fingers which move the straw into the bale chamber). 
I can't explain why this would suddenly become a problem, however... 
Packer-to-finger timing shouldn't be an issue - you'll know in a hurry 
if thats off. I believe there is an interlock which will shear a pin if 
that timing is off to prevent the packer from crushing the mechanism.

 good luck

 -jf



Follow-Ups: References: