This is the Sound Blaster AWE HOWTO. It gives you detailed information about getting the most out of your Sound Blaster 32 or better, including Wave Table synthesis. This document covers all SB cards up from the SB 32.
The Sound Blaster series is well-known in the DOS and Windows community, and a lot of Linux users want to use this sound card under Linux as well. Unfortunately, Creative Labs only provides a sound driver for Windows and DOS, so it is not trivial to install and use a SB card under Linux. This document tries to describe how one can use the features of the SB AWE series under a Linux environment.
This documents contains information I got from the AWE Driver FAQ and the ISA PnP FAQ. See section Sources for author and location of this documents. Thanks to the authors, the SB AWE support is possible.
A lot of essential work was done by Hannu Savolainen, who developed the sound driver that comes with the Linux kernel. Thank you!
I want to thank Nicola Bernardelli for testing the AWE64 stuff. Without him, many errors would have remained undetected.
Thanks to the SGML Tools package, this HOWTO is available in several formats, all generated from a common source file.
corrected spelling (thanks Curt!), added version
isapnp, now available via sunsite and lots of mirrors
French version now available!, minor corrections, lots of spelling fixed (thanks to ispell)
The latest version can be found on my Home Page, namely at Sound Blaster AWE HOWTO.
New versions of this document will be uploaded to various anonymous ftp sites that archive such information including ftp://sunsite.unc.edu/pub/Linux/docs/HOWTO/mini.
Hypertext versions of this and other Linux HOWTOs are available on
many World-Wide-Web sites, including
http://sunsite.unc.edu/LDP/. Most Linux CD-ROM
distributions include the HOWTOs, often under the
Thanks to Arnaud Launay email@example.com, a French version of this document is now available! The latest version can be found via http or anonymous ftp.
If you make a translation of this document into another language, let me know and I'll include a reference to it here.
I rely on you, the reader, to make this HOWTO useful. If you have any suggestions, corrections, or comments, please send them to me, Marcus.Brinkmann@ruhr-uni-bochum.de, and I will try to incorporate them in the next revision.
i would especially welcome information about the startup procedure (boot scripts etc.) of other famous Linux distributions, e. g. Red Hat or SuSE Linux.
If you publish this document on a CD-ROM or in hardcopy form, a complimentary copy would be appreciated. Mail me for my postal address. Also consider making a donation to the Linux Documentation Project to help support free documentation for Linux. Contact the Linux HOWTO coordinator, Tim Bynum firstname.lastname@example.org, for more information.
Copyright 1997 Marcus Brinkmann.
This HOWTO is free documentation; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This document is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of merchantability or fitness for a particular purpose. See the GNU General Public License for more details.
You can obtain a copy of the GNU General Public License by writing to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
This document tries to help you install and use a Sound Blaster AWE 32 or Sound Blaster AWE 64 from Creative Labs in your Linux system. The reference system is a Debian GNU/Linux system on an Intel i586 platform, but it should work with any other Linux distribution as well as on every platform that is supported by the Linux sound driver (differences are mentioned where they appear, if any).
Be sure to read the Linux Sound HOWTO (see section Additional Information) carefully. I consider my document a supplement to the Sound HOWTO, and often you can find more information about things I have left out there.
The SB AWE 32 sound card provides a raw audio device, standard OPL-2/OPL-3 synthesis, a MPU-401 MIDI port and 32 voices EMU 8000 Wave Table synthesis (for an explanation on these and other terms see the Linux Sound HOWTO). One goal of this document is to help you get all these features to work properly.
The SB AWE 64 has the capabilities of the SB AWE 32 and an additional Wave Guide synthesis Creative Labs is especially proud of. The problem for Linux users is, that the additional 32 voices are software generated and output via the raw wave devices. Because Creative Labs sees no market in Linux drivers, a Wave Guide synthesis sound driver is only available for Windows 3.1 and Windows 95.
This means that, from a Linux user's point of view, the SB AWE 32 and SB AWE 64 are almost identical. From now on I will only refer to the SB AWE in general and will only mention differences where they appear (if any).
Most modern cards for the Intel platform are ISA PnP cards, which is an abbreviation for ``Plug and Play''. This means, that the card has to be configured by the operation system, and this has to be done through an initialization routine at boot time. In general, there are at least three possible ways to do this:
The most commonly used software to initialize PnP cards under Linux are the ``isapnptools'' (see section Sources and section Getting Started). They provide a predictable way to configure all ISA PnP cards in your machine, not only your sound card.
Some device drivers can be built as modules instead of compiling them into the kernel. You can find more information about modules in the Kernel HOWTO and the Module HOWTO (see section Additional Information).
If you have a PnP card, you must install sound support as a loadable kernel module. This means, that you can't build the sound driver into the kernel, but you will have to build it as a module that can be loaded into the kernel at runtime. This is because the kernel will be installed before your ISA PnP card can be configured, and your sound driver has to be loaded after your ISA PnP card is configured.
The sound kernel module can be loaded manually via
insmod sound or
modprobe -a sound or in the appropriate boot script of your Linux system
(in Debian, it is sufficient to append a single line containing
/etc/modules). Another approach is to
kerneld, a daemon that installs and removes kernel
modules as needed.
kerneld may not be the best solution for the AWE
sound driver module, because it takes time to load the module in the
kernel, especially if you want to use Wave Table synthesis and load big
Sound Font banks, which you have to do each time after inserting the
kerneld removes unused modules after one minute by default,
it is perhaps better to insert the sound module manually or at boot
time. Note that inserting the sound module manually or at boot time does prevent
kerneld from removing it when it is idle. By the way: You can
manually insert the sound module and use
kerneld at the same
time. The two methods don't conflict, but
kerneld does not care
about the sound module anymore.
This is especially useful if your mixer settings get disturbed after
removing and reinstalling the module. A solution for this problem will be
given in section
(there is described how you can start your mixer automatically
when the sound module gets inserted). However, it takes time for
kerneld to load the module, to load the sound font bank and to start
your mixer, and for this and other reasons it is better to install the sound module
at boot time and not let
kerneld remove it.
You can install sound support in the kernel as a built-in or as a loadable module. If you have a PnP card, you have to install sound support as a module, because the PnP card needs to be initialized via the isapnptools before the module gets installed.
As you can imagine, you will have to recompile the kernel. I will give you a few hints about it below. For now, let's talk about the sound support in the kernel source. The kernel ships with the Free (Lite) Version of the OSS (USS) sound driver. The current version of this driver (3.5.4) does not support the SB AWE in full, but the SB 16 part of it. So you can have a raw audio device and OPL-2/OPL-3 synthesis if you use it, but you will not be able to play midi music with Wave Table synthesis.
If you want to use the Wave Table device, you can either buy the commercial sound driver from 4Front Technologies (someone please confirm me that it can do it, please), or patch your kernel with the AWE 32 Sound Driver Extension by Takashi Iwai. The former is beyond the scope of this document, I assume you want to use the latter.
The AWE32 Sound Driver Extension (see section Sources) is published under the GNU copyright license and ships with a number of tools to make use of the EMU 8000 wave synthesis of the SB AWE cards.
awedrv software is already included in newer kernel source trees
(starting from some 2.1.x kernels, but perhaps you want to upgrade the
sources in your kernel tree, they may be old.
These are the requirements for SB AWE support under Linux:
If you have a PnP card, you will also need:
Look in section Sources for information where you can obtain these programs.
If you have a Debian GNU/Linux system, this means that you will need
and perhaps the package
You will want some of the other
although they are not essential. I strongly recommend the
kernel-package for easy kernel compiling and installing.
Let's assume you have properly installed your card in a socket on your motherboard and perhaps already tested it under a DOS or Windows environment.
The next step is to initialize the card at boot time if and only if it is a
PnP card. Follow the documentation in the source package to compile and
isapnptools (or just use the Debian binary package), and make a
# pnpdump > /etc/isapnp.conf
as root. This will generate a hopefully proper configuration file for your
PnP cards, but with all devices commented out. Please edit this file
carefully, and compare the values for DMA channels, IO bases and interrupts
with the configuration of the cards under an DOS or Window environment if
possible (with Win95, look at the resources used by the card under
resources in the
device manager). If you have problems,
read the documentation that ships with the
isapnptools often fails to detect all three I/O ports
of the SB AWE Wave Table device. Please check carefully the
entry in your
isapnp.conf against the example at the end of this HOWTO.
Adjust the I/O base addresses if necessary.
CAUTION: According to the
fails to program the number of the logical device. If you encounter error
messages like the following:
Error occurred executing request 'LD 2' on or around line...
then try adding
(VERIFYLD N) at the top of
isapnp.conf. You have
to use at least version 1.10 for this to work. If you can't use version 1.10
or newer, you can also POKE the logical device numbers directly. Please
refer to the
isapnp-faq for more information on this approach. If it
doesn't work for you, please contact me (and the
will be interested, too, I would think).
CAUTION: Make sure that the last line is
that will sometimes be omitted by older versions of
isapnp.conf for only one PnP card (the sound card) can be found at
the end of the document (see section
If you have a Debian system, no further adjustments are necessary.
isapnp will be started at boot time in
this snippet of script code, that you may want to include in your boot scripts:
# Configure the isa plug and play boards before loading # modules. Need to do this before loading modules to get # a chance of configuring and starting PnP boards before # the drivers mess all this up. # if [ -x /etc/init.d/isapnp ] then /etc/init.d/isapnp start fi
#! /bin/sh # /etc/init.d/isapnp: configure Plug and Play boards test -x /sbin/isapnp || exit 0 /sbin/isapnp /etc/isapnp.conf exit 0
If you have another Linux distribution, you are on your own. I don't know what to do (anybody willing to submit more specific information?). Just make sure that isapnp gets started before the modules will be loaded (see below).
Before recompiling the kernel, you have to apply the AWE Driver Extension to
the sound driver. Even if your kernel source tree already includes the
awedrv extension (check
/drivers/sound/lowlevel/ for that), you
may want to upgrade the
awedrv software. Follow the installation
instructions in the
awedrv source directory. In brief, you have to run
an installation script that applies the patches to the kernel sources.
Be careful if you have upgraded the kernel source tree after running the
install script. The script just checks if a certain file exists - if it
exists, it does not apply the necessary patch. You are well advised to
remove the file
drivers/sound/lowlevel/awe_wav.c before running the
script after upgrading the kernel source.
Next you have to configure the kernel for sound support. I hope you know a
bit about kernel compiling; see the Sound HOWTO and the Kernel HOWTO for
details. Go in the source directory of your kernel sources
/usr/src/linux for example), and do
# make config
make menuconfig or
make xconfig. Then you have to
configure your kernel in the standard way. Use this opportunity to make
a small and powerful kernel, especially designed for your system. Be sure
Enable loadable module support with
Y, if you want to
install the sound driver as a loadable module (a must if you
have a PnP card), but I'm sure you want to do it anyway.
At one point, you will be asked if you want sound card support. You are free
to answer with
Y or with
M if you have not a PnP card.
You must answer with
M, for module, if you have a PnP card.
You have to compile sound card support as a module if you have a PnP
card because the PnP card has to be initialized before the module gets loaded.
The following questions you should answer with
Y, all other with
Sound Blaster (SB, SBPro, SB16, clones) support (CONFIG_SB) [Y/n/?] Generic OPL2/OPL3 FM synthesizer support (CONFIG_ADLIB) [Y/n/?] /dev/dsp and /dev/audio support (CONFIG_AUDIO) [Y/n/?] MIDI interface support (CONFIG_MIDI) [Y/n/?] FM synthesizer (YM3812/OPL-3) support (CONFIG_YM3812) [Y/n/?] lowlevel sound driver support [Y/n/?] AWE32 support (CONFIG_AWE32_SYNTH) [Y/n/?]
Only the latter is actually for the Wave Table synthesis. The others are SB 16 options from the OSS/Free sound driver.
In addition, you have to configure the sound card I/O port. Look at the
isapnp.conf file for hints, if you have one. For me, the following default
values are sufficient. Note that the default value from the kernel
configuration script may be wrong (especially the values
SB_MPU_BASE seem to be incorrect for most cards).
I/O base for SB Check from manual of the card (SBC_BASE)  Sound Blaster IRQ Check from manual of the card (SBC_IRQ)  Sound Blaster DMA 0, 1 or 3 (SBC_DMA)  Sound Blaster 16 bit DMA (_REQUIRED_for SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards) (SB_DMA2)  MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card (SB_MPU_BASE)  SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Use -1 with SB16 (SB_MPU_IRQ) [-1]
Now recompile the kernel. Debian users should use the
kernel-package. This package makes the kernel compile as easy as
installing a debian package. Look at the documentation in
/usr/doc/kernel-package/. Here is a hint:
# make-kpkg clean # make-kpkg -revision custom.1.0 kernel_image
dpkg -i /usr/src/kernel-image-2.0.29_custom.1.0_i386.deb.
If you have another Linux distribution, follow the standard way for
compiling a new kernel. Don't forget
make modules and
modules_install. Look at the Sound HOWTO and perhaps the Kernel HOWTO
for more information.
After installing the new kernel, you should do a reboot (be sure to have a functional boot disk at hand). Cross you fingers.
If you have a PnP card be sure to launch isapnp either in a boot script (as described above) or manually:
# /sbin/isapnp /etc/isapnp.conf Board 1 has Identity 74 00 00 e3 10 48 00 8c 0e: CTL0048 Serial No 58128 [checksum 74]
Now you can install the sound driver, if you have compiled it as a module:
# modprobe -a sound AWE32 Sound Driver v0.3.3e (DRAM 2048k)
If you think the memory detection was not correct (I have a report of one
who has a AWE64 with 4096k, and ``detected'' have been 28672k), try either
to upgrade the
awedrv software or to specify the amount of memory in the file
/usr/src/linux/drivers/sound/lowlevel/awe_config.h, for example:
#define AWE_DEFAULT_MEM_SIZE 4096 /* kbytes */
Sorry, you have to recompile the kernel then (perhaps compiling the modules will be sufficient, but I don't know for sure).
If it works, you may want to have the sound module loaded automatically.
You can use
kerneld (why this is a bad idea is explained in section 1.4) or
append a single line containing
sound to your
/etc/modules (in Debian)
/sbin/modprobe -a sound to your start-up script.
If you have built-in sound support, you will get some useful information at
boot time. If you have sound support installed as a loadable module, you can
get the same information (perhaps after removing the sound module with
modprobe -r sound first) with
# modprobe -a sound trace_init=1 Sound initialization started <Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5 <Sound Blaster 16> at 0x330 irq 5 dma 0 <Yamaha OPL3 FM> at 0x388 Sound initialization complete AWE32 Sound Driver v0.3.3e (DRAM 2048k)
If you have a
/proc virtual file system, you can look for the sound device
# cat /proc/devices Character devices: [...] 14 sound [...]
Next make sure you have the correct devices installed under
look at the Sound HOWTO for details. Then ask
/dev/sndstat about the status of
the sound module:
# cat /dev/sndstat Sound Driver:3.5.4-960630 (Sat Oct 11 19:35:14 CEST 1997 root, Linux flora 2.0.29 #1 Sat Oct 11 19:12:56 CEST 1997 i586 unknown) Kernel: Linux flora 2.0.29 #1 Sat Oct 11 19:36:23 CEST 1997 i586 Config options: 0 Installed drivers: Type 1: OPL-2/OPL-3 FM Type 2: Sound Blaster Type 7: SB MPU-401 Card config: Sound Blaster at 0x220 irq 5 drq 1,5 SB MPU-401 at 0x330 irq 5 drq 0 OPL-2/OPL-3 FM at 0x388 drq 0 Audio devices: 0: Sound Blaster 16 (4.13) Synth devices: 0: Yamaha OPL-3 1: AWE32 Driver v0.3.3e (DRAM 2048k) Midi devices: 0: Sound Blaster 16 Timers: 0: System clock Mixers: 0: Sound Blaster 1: AWE32 Equalizer
If you don't have an output like this, perhaps there is an error in your configuration. Go on and see what doesn't work, then go back to step Getting Started, checking everything.
Try to get an
.au file (Sun workstation) or a raw sample file, and do
# cat bell.au > /dev/audio
# cat sample > /dev/dsp
You should hear the content of the file via the
Audio Device 0: Sound
Blaster 16 (4.3).
If you want to use the OPL-2/OPL-3 FM synthesis to play MIDI-Files with your
sound card, try the program
playmidi (see Appendix B). Start it with
# playmidi -f dance.mid
# playmidi -4 dance.mid
The former will give you OPL-2, the latter OPL-3 MIDI music. If you are embarrassed about the sound, don't blame playmidi: It is the FM synthesis that sounds bad.
Imagine you would only have the OSS/Free Sound Driver: Than this is the quality of MIDI Music you can achieve (apart from software synthesis). Fortunately, you have a SB AWE, and you can use the Wave Table capabilities with the AWE Sound Driver Extension.
The AWE Driver Extension comes with special tools (
awesfx) to make use of the
EMU 8000 Wave Table synthesis. First, you have to load a Sound Font Bank on
your card - even if you want to use the ROM samples! You can get the files
from your Windows installation - look for files ending in
The ROM samples can be loaded with
SYNTHGM.SBK, real samples are in
SYNTHMT.SBK, as well as in
SAMPLE.SBK. You can get other
Sound Font Banks via ftp or www, try the EMU Homepage, the web site from
Creative Labs, and look out for the Chaos samples, they are really good (be
sure to check out the AWE Driver Web Site).
Try to load the standard GM (ROM) set with
# sfxload -i synthgm.sbk
and then play a midi file that comes with your SB AWE:
# drvmidi dance.mid
Get your favorite mixer program and start it. Start a raw audio sample and two MIDI files at the same time, and try out the mixer settings. Play a bit, it should be very easy. Here a list of the devices and how they are called:
Synth or FM
Synth or FM (does anyone know a mixer were the last two are separated from each other?)
PCM or DSP
Other mixer settings refer to the CD ROM, possibly connected to the sound card, to Master Volume, Bass, Treble and Recording Level of the different input lines. You can specify which lines should be recorded.
You can record different sources: a connected CD ROM, a microphone connected
mic, and any that you can connect to
line in. Set the
mixer in the appropriate position. Play a sound and record into a file,
reading from the Raw Audio Device, for example:
# cdplay # dd bs=8k count=5 </dev/dsp >music.au 5+0 records in 5+0 records out # cat music.au >/dev/dsp
records and plays five seconds of audio from the input device.
Sorry, no information about MIDI port yet!
You can load samples in your DRAM on the sound card with the
tool. Note that you can only load one sample file per bank, with bank 0 as
default. So, after
sfxload synthgs.sbk, the only samples on your
sound card are the GS samples. If you want to load additional Sound Font
Banks, you have to use the
-b option, for example:
# sfxload synthgs.sbk # sfxload -b1 sample.sbk # drvmidi sfx.mid
You can load a default Sound Font Bank automatically with installing the module. Just append a line like
post-install sound /usr/bin/sfxload synthgm.sbk
See the documentation for more details about
drvmidi program, you can use your AWE Driver to play MIDI
files. Just specify the name of your midi file after the command:
# drvmidi waltz.mid
See the documentation for more details about
Author: Jeff Tranter,
Last Version: v1.17, 4 August 1997
Please take a good look at the Sound HOWTO (available from sunsite.unc.edu and other sites). It contains a bulk of data about compiling the kernel with sound support, and explains a lot about the sound devices, applications etc.
I understand this HOWTO as an addition to the Sound HOWTO.
Author: Yoo C. Chung,
Last Version: v1.4, 13 May 1997
You should also look at the Sound Playing HOWTO. It tells you about the various sound formats and applications to play them.
Author: Takashi Iwai
If you have problems installing the AWE Driver or using the Wave Table synthesis of your Sound Blaster card, then look here.
Author: Peter Fox
If you have problems configuring your ISA PnP card, then this is your book of wisdom.
Author: Peter Fox
Last Version: 1.11
If mailing patches, bug reports or comments, please put 'isapnp' somewhere in the subject line, and mail to email@example.com.
Author: Takashi Iwai
Last Version: 0.4.2c
Author: Linus Torvald and many other
Last Version: At the moment, you should use 2.0.29
Source: everywhere, where you can obtain Linux
Author: Hannu Savolainen (Please check http://www.4front-tech.com/usslite before mailing me).
Last Version: I have 3.5.5-beta1
Source: with the Linux kernel source package
Information: http://www.4front-tech.com/usslite or European mirror.
In the ISA PnP configuration file created by pnpdump, the single devices of your PnP cards appear as sections. In the output below, one card was detected (the sound card), with four logical devices:
LD 0: Audio Device
LD 1: IDE Device
LD 2: WaveTable Device
LD 3: Gameport Device
LD 1 unconfigured, because I have no CD ROM attached to my sound card
IDE port. If you have no IDE port on your SB, then
LD 1 will be the Gameport
LD 3 will not appear.
Please refer to section Getting started for further (important!) information about this file.
# $Id: pnpdump.c,v 1.9 1997/06/10 21:37:32 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER (READPORT 0x0203) (ISOLATE) (IDENTIFY *) # Try the following if you get error messages like # Error occurred executing request 'LD 2' on or around line... #(VERIFYLD N) # ANSI string -->Creative SB32 PnP<-- (CONFIGURE CTL0048/58128 (LD 0 # ANSI string -->Audio<-- (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 1 # ANSI string -->IDE<-- # (INT 0 (IRQ 10 (MODE +E))) # (IO 0 (BASE 0x0168)) # (IO 1 (BASE 0x036e)) # (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) (IO 2 (BASE 0x0E20)) (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 3 # ANSI string -->Game<-- (IO 0 (BASE 0x0200)) (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY)