<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V4.1//EN"[
<!ENTITY pt "[user@localhost]$ ">
]>

<article id="Conexant-Rockwell-modem-HOWTO" lang="hu">

<articleinfo>
<title>Conexant/Rockwell modem HOGYAN</title>
<authorgroup>
<author>
<firstname>Imran</firstname>
<surname>Ghory</surname>
<affiliation> <address><email>ImranG@btinternet.com</email></address> </affiliation> 
</author>
</authorgroup>

<legalnotice> 
<para>Ez a dokumentum szabadon terjeszthető a GNU FDL licenc feltételei szerint.</para>
</legalnotice>

<keywordset>
<keyword>Conexant</keyword>
<keyword>SoftK56</keyword>
<keyword>Rockwell</keyword>
<keyword>Modem</keyword>
<keyword>HSF</keyword>
<keyword>HCF</keyword>
<keyword>Riptide</keyword>
<keyword>winmodem</keyword>
<keyword>softmodem</keyword>
</keywordset> 

<pubdate>2001.08.01</pubdate>

<revhistory>

   <revision>
      <revnumber>1.3</revnumber>
      <date>2002.03.12</date>
      <authorinitials>ig</authorinitials>
      <revremark>
                Frissítve az új HCF eszközmeghajtó információival.
      </revremark>
   </revision>

   <revision>
      <revnumber>1.2</revnumber>
      <date>2002.02.21</date>
      <authorinitials>ig</authorinitials>
      <revremark>
		Frissítve az új HSF és a HCF eszközmeghajtó kibocsátásának időpontjával.
      </revremark>
   </revision>


   <revision>
      <revnumber>1.0</revnumber>
      <date>2001.09.09</date>
      <authorinitials>ig</authorinitials>
      <revremark>
		Újsz bejegyzések a GYIK-ban, nyelvtani hibák javítása, egy URL frissítése.
      </revremark>
   </revision>

   <revision>
      <revnumber>0.9</revnumber>
      <date>2001.08.01</date>
      <authorinitials>ig</authorinitials>
      <revremark>
            Első kiadás.
      </revremark>
   </revision>
</revhistory>

<abstract>
<para>
Ez egy útmutató a Conexant/Rockwell lapkakészletű szoftveres modemek Linux alatti használatához.
</para>
<para>
(Érdemes elolvasni a <ulink url="http://portal.fsn.hu/modules.php?name=News&amp;file=article&amp;sid=4928&amp;mode=nested">HUP hozzászólásokat</ulink>,
valamint ellátogatni a <ulink url="http://hsf.szm.sk/">http://hsf.szm.sk/</ulink> webhelyre - a lektor.)
</para>
</abstract>

</articleinfo>

<sect1 id="introduction">
<title>Bevezetés</title>

<sect2 id="purpose">
<title>A dokumentum célja</title>

<para>
Ha Conexant/Rockwell lapkakészletes modemed nem tudod beüzemelni, akkor jó helyen jársz. Valószínűleg egy szoftveres modem (más néven winmodem) van a birtokodban, ebben az esetben szükséged van egy megfelelő eszközmeghajtóra, hogy a modem Linux alatt is működjön.
</para>

<para>
Ha olyan szoftveres modemed van, amelynek a lapkakészletét nem a Conexant/Rockwell gyártotta, akkor inkább a <ulink url="http://www.tldp.org/HOWTO/Linmodem-HOWTO.html"><citetitle>linmodem HOWTO</citetitle></ulink> (Linmodem HOGYAN) dokumentumot olvasd el. (Vagy a The <ulink url="http://tldp.org/HOWTO/Winmodems-and-Linux-HOWTO.html">Winmodems-and-Linux HOWTO</ulink>; <ulink url="http://tldp.fsf.hu/HOWTO/Winmodems-and-Linux-HOWTO-hu.html">Winmodemek és a Linux HOGYAN</ulink> dokumentumot - a lektor)

</para>

<para>
Ez a dokumentum nem tartalmaz információt arról, hogyan kell használni a Conexant/Rockwell alapú modemeket nem Linux operációs rendszerek alatt. Jelenleg nincs ismert eszközmeghajtó FreeBSD és BeOS operációs rendszerre, a Windows eszközmeghajtókat a Conexanttól lehet beszerezni.
</para>
</sect2>

<sect2 id="about">
<title>Erről a HOGYANról</title>

<para>
Ez a HOGYAN eredetileg egy honlap volt, amely leírta, hogyan kell a Conexant HSF modemet telepíteni Linux alatt. Alig néhány hónap alatt a weblap látogatottsága nagyon megnőtt (a HOGYAN megírásának idejében 100 lekérés naponta), valamint a kérdések is megsokasodtak a Conexant/Rockwell modemekről a linmodem levelezési listán illetve különböző Usenet illetve webes fórumokon. Ez késztetett arra az elhatározásra, hogy mindezt az információt más formában kellene közzétenni, ami sokkal elérhetőbb az érdeklődőknek. Ennek az eredménye ez a HOGYAN, ami sokkal bővebb lett mint az eredeti weblap azért, hogy minden kérdést megválaszoljon, amely az Interneten felmerült.</para>
<para> A Conexant/Rockwell modemek Linux alatti használatával kapcsolatos információk iránti igények megnövekedésével egy időben, számos nem angol nyelvű, az eszközmeghajtók beállításáról szóló weblap is megjelent, még olyan nyelveken is mint a portugál vagyió ami a japán. Ezekről a weblapakról viszont gyakran hiányzott a legfrissebb információ, ami megnehezítette a nem angol nyelvű felhasználók dolgát. Úgy döntöttem, hogy ezt a HOGYANt a GNU FDL licenc alatt bocsátom ki, így más anyanyelvűek lefordíthatják ezt a dokumentumot a saját nyelvükre és szabadon terjeszthetik. Ily módon mindenkihez eljuthat az információ függetlenül attól, milyen nyelvet beszél. Ha szeretnéd lefordítani ezt a HOGYANt, kérlek keress meg.</para>
<para>(Természetesen magyarra már nem érdemes lefordítani. Ha van kedved fordítani válassz egy másik HOGYANt, hogy minél több meglegyen magyarul. Jó kiindulási pont a <ulink url="http://tldp.fsf.hu/">Magyar Linux Dokumentációs Projekt</ulink> honlapja - a ford.)</para>
<para>Ez a HOGYAN feltételez némi alapvető Linux ismeretet. Feltételezi, hogy tisztában vagy a konzol/terminál alapvető használatával, ismered a gyakrabb parancsokat, mint például a "less", és ismersz valamilyen szövegszerkesztőt. Amikor ez HOGYAN azt írja, hogy adj ki valamilyen parancsot a konzolon, a konzol készenléti jel (prompt) így fog megjelenni: "<prompt>&pt;</prompt>"
</para>

<para>
A HOGYAN néhány része a Linux mélyebb ismeretét is feltételezi, de azok a szakaszok főleg azokra vonatkoznak, akik nem a gyakrabban előforduló Linux terjesztéseket használják.
</para>

</sect2>

<sect2 id="feedback">
<title>Visszajelzés</title>
<para>
Ha bármilyen észrevételed van, amellyel lehetne javítani ezen a HOGYANon, vagy le szeretnéd fordítani ezt a HOGYANt más nyelvre, akkor küldj egy e-mail-t a <ulink url="mailto:ImranG@btinternet.com"><citetitle>ImranG@btinternet.com</citetitle></ulink> e-mail címre (ha nem válaszolnék egy héten belül akkor küldd el újra a leveled a <ulink url="mailto:imran@bits.bris.ac.uk"><citetitle>imran@bits.bris.ac.uk</citetitle></ulink> címre).</para>

<para>
Ha segítségre van szükséged a modemed beállításához, inkább a <link linkend="getting-help">Segítségkérés</link> fejezetben megjelölt forrásokhoz fordulj, mintsem nekem írj egy e-mail-t közvetlenül, mert valószínűleg gyorsabban fogsz válasz kapni az ott feltüntetett helyekről, mint tőlem. 
</para>
</sect2>

<sect2 id="licence">
<title>Licenc</title>
<para>Copyright (c) 2001,2002 Imran Ghory</para>
<para>Ezen dokumentum másolása,
terjesztése és/vagy módosítása engedélyezett a GNU Free Documentation License
1.1 változata, vagy bármelyik későbbi, a Free Software Foundation által közzétett
változat feltételei szerint; állandó fejezetek nélkül, előlapi és hátoldali
szöveg nélkül. A licenc szövege megtalálható e dokumentum <ulink url="#fdl-app">GNU Free Documentation License"</ulink> fejezete alatt. (A licenc szövege nincs lefordítva ebben a dokumentumban - a ford.) </para>

</sect2>
<sect2 id="acknowledgements">
<title>Köszönetnyilvánítás</title>
<para>
Köszönet:</para>
<itemizedlist mark="opencircle">

<listitem>
<para>
A Conexantnak az eredeti HSF illesztőprogram megírásáért, és az Olitecnek a terjesztésért.
</para>
</listitem>
<listitem>
<para>
Marc Bouchernek, amiért írt egy illesztőfelületet a 2.4.* rendszermaghoz.
</para>
</listitem>
<listitem>
<para>
Denis Havliknak, amiért a Linux-közösség többi tagjának figyelmét felhívta az Olitec eszközmeghajtójára.
</para>
</listitem>
<listitem>
<para>
Thomas Iversennek az eszközmeghajtók tükrözéséért.
</para>
</listitem>
</itemizedlist>

</sect2>

<sect2 id="getting-help">
<title>Segítségkérés</title>
<para>Miután elolvastad ezt a HOGYANt és mégsem tudod beüzemelni a modemed, ha még nem tetted meg eddig, nézd át ennek a leírásnak a végén a <ulink url="#faq">"Gyakran Ismételt Kérdések"</ulink> fejezetet, mivel az foglalkozik a leggyakoribb problémákkal. Ha még ezután is elakadsz három különböző helyről kérhetsz segítséget:</para>

<variablelist>
<varlistentry><term>Linmodem levelezőlista</term>
<listitem>
<para>
A Linmodem levelezőlista a legfontosabb hely az Interneten a szoftveres modemek Linux alatti használatával kapcsolatos megbeszélésekre. Ha valakinek volt már a tiédhez hasonló problémája, valaki a linmodem levelezési listán jó eséllyel ismeri azt. Ha fel akarsz iratkozni a levelezési listára küldj egy üres levelet a <ulink url="mailto:discuss-subscribe@linmodems.org"><citetitle>discuss-subscribe@linmodems.org</citetitle></ulink> e-mail címre. A levelezőlista a <ulink url="http://www.linmodems.org"><citetitle>www.linmodems.org</citetitle></ulink> webhelyen található.
</para>
</listitem>
</varlistentry>

<varlistentry>
<term>SoftModems IRC csatorna</term>
<listitem>
<para>
Ha szeretnél valakivel egyenesben beszélni, akkor legjobb ha belépsz az Openproject IRC hálózatán a #SoftModems csatornára. További részleteket a <ulink url="http://www.openprojects.org"><citetitle>www.openprojects.org</citetitle></ulink> webhelyen olvashatsz, vagy csatlakozz a eu.opirc.nu-hoz a 6667 porton.</para>
</listitem>
</varlistentry>

<varlistentry>
<term>Hírcsoportok</term>
<listitem>
<para>
A <ulink url="news://comp.os.linux.hardware"><citetitle>comp.os.linux.hardware</citetitle></ulink> és a <ulink url="news://comp.os.linux.setup"><citetitle>comp.os.linux.setup</citetitle></ulink> hírcsoportokban gyakran lehet találkozni olyan emberekkel,  akik járatosak a szoftmodemek témájában. Ha beszélsz olaszul a <ulink url="news://it.comp.os.linux.iniziare"><citetitle>it.comp.os.linux.iniziare</citetitle></ulink> listán találkozhatsz olyan emberekkel, akik ismerhetik a Conexant/Rockwell modemeket (magyar felhasználók a hun.lists.mlf listán találhatók - a ford.).
</para>
</listitem>
</varlistentry>

</variablelist>
<para>
Ne feledd, amikor segítséget kérsz, mindig add meg a modem pontos típusát, gyártóját és a hibaüzenetet amit kaptál.</para>
</sect2>

<sect2>
<title>Magyar fordítás</title>

<para>
A magyar fordítást <ulink url="mailto:zkispal@freemail.hu_NO_SPAM">Kispál Zsolt</ulink> készítette (2003.09.11).
A lektorálást <ulink url="mailto:dacas@freemail.hu_NO_SPAM">Daczi László</ulink> végezte el (2003.12.13).
A fordítás javítva (R1) 2003.12.16.-án.
A dokumentum legfrissebb változata megtalálható a <ulink url="http://tldp.fsf.hu/index.html">Magyar Linux Dokumentációs Projekt</ulink> honlapján.
</para>

</sect2>

</sect1>

<sect1 id="quick-start">
<title>Beüzemelési útmutató</title>
<para>Ez a rész megpróbál gyors segítséget adni, hogy minél gyorsabban beüzemeld rendszered. Ha az alább leírtak működnek, akár el is felejtheted ennek a HOGYANnak a hátralévő részét. Ez a rész gyakrabban frissül mint a HOGYAN többi része, tehát ez tartalmazza a legfrissebb információkat.</para>

<para>Legelőször azt kell megállapítanod, hogy HSF vagy HCF modemed van. Ezt a következő módokon teheted meg: megnézed a modemed windowosos eszközmeghajtóját, megnézed a címkét a modem lapkakészletén, vagy letöltöd a <ulink url="http://www.conexant.com/customer/md_driverassistance.html"><citetitle>ListModem</citetitle></ulink> segédprogramot, futtatod, és így szerzed meg az információt.

Mind a két típusra elérhetők eszközmeghajtók, de a HSF meghajtó fejlettebb mint a HCF. A HCF meghajtó első bétája 2002 év közepén jelenik meg várhatóan.

A következő fejezetekben mind a HSF, mind a HCF modem beüzemeléséről adunk egy rövid leírást.
</para>

<sect2 id="quick-start-HSF">
<title>A HSF modem beüzemelése</title>

<orderedlist numeration="arabic">
<listitem>
<para>
Töltsd le az eszközmeghajtót a <ulink url="http://www.mbsi.ca/hsflinux/"><citetitle>http://www.mbsi.ca/hsflinux/</citetitle></ulink> webhelyről, a következő útmutatás az RPM csomaghoz készült, javaslom ezt használd.
</para>

</listitem>

<listitem>
<para>
Indíts el egy terminálablakot (vagy nyiss egy konzolt), válts root felhasználóra és lépj abba a könyvtárba, ahová letöltötted az eszközmeghajtót, majd gépeld be: rpm -i "eszközmeghajtó_neve". Például, ha az eszközmeghajtó neve
<filename>hsflinmodem-4.06.06.02mbsibeta02012000-1.i586.rpm</filename> akkor a következőt kell begépelni,</para>
<para>
<prompt>&pt;</prompt><command>rpm -i hsflinmodem-4.06.06.02mbsibeta02012000-1.i586.rpm</command></para>
</listitem>
<listitem>
<para>
Futtasd a <command>hsfconfig</command> programot, és kövesd a képernyőn megjelenő utasításokat. Automatikusan fel kell ismernie a modemedet, és telepítenie kell az eszközmeghajtót. Ha valamilyen problémád lenne, nézz bele az eszközmeghajtó dokumentációjába.
</para></listitem></orderedlist>
<para>Most már be fogod tudni állítani az Internetkapcsolatot, bár meg kell neki adni, hogy a modemed a <filename>/dev/modem</filename> könyvtár alatt található. Ha az Internetkapcsolatot biztosító szoftvered nem tudja elérni, lehet, meg kell változtatnod a jogosultságokat.<para>

<para>
[Technikai megjegyzés: Ha a modemed eszközazonosítója (device ID) 2005, akkor a kézi beállítást kell választanod a beüzemeléshez.]
</para>

<para>
Ha a fenti eljárás nálad nem működne vagy a fent említett eszközmeghajtó nem működik a rendszereden (például, ha többprocesszoros géped van), akkor olvasd tovább ezt a HOGYANt, ezután írjuk le részletesen, hogyan kell használni a régebbi eszközmeghajtót.
</para>
</sect2>


<sect2 id="quick-start-HCF">
<title>A HCF modem beüzemelése</title>
<orderedlist numeration="arabic">
<listitem>
<para>
Töltsd le az eszközmeghajtót a <ulink url="http://www.mbsi.ca/hcflinux/"><citetitle>http://www.mbsi.ca/hcflinux/</citetitle></ulink> webhelyről. Az alábbi útmutató a bináris RPM meghajtóhoz készült, amit a legkönnyebb telepíteni. Ha másként szeretnéd telepíteni, akkor a README fájlban találhatsz hozzá információt. 
</para>
</listitem>

<listitem>
<para>
Nyiss egy terminálablakot (vagy egy konzolt), válts root felhasználóra, és lépj be abba a könyvtárba, ahová az eszközmeghajtót letöltötted. Itt add ki az "rpm -i" parancsot, megadve az eszközmeghajtó fájlnevét. Ha például az eszközmeghajtó neve: 
<filename>hcflinmodem-0.9mbsibeta02030801-1.i586.rpm</filename> akkor a következőt gépeled be:</para>
<para>
<prompt>&pt;</prompt><command>rpm -i hcflinmodem-0.9mbsibeta02030801-1.i586.rpm</command>
</para>
</listitem>
<listitem>

<para>
Futtasd a <command>hcfconfig</command> parancsot és kövesd a képernyőn megjelenő utasításokat, automatikusan fel kell ismernie a modemedet és telepítenie kell az eszközmeghajtót. Ha valamilyen probléma adódna, olvasd át az eszközmeghajtóhoz mellékelt dokumentációt.<para></listitem>
</orderedlist>
<para>Most már be kell tudnod állítani az Internetkapcsolatot, a beállítás során meg kell adnod, hogy a modem a <filename>/dev/modem</filename> eszközként található meg.  Ha az Internetkapcsolatot biztosító szoftvered nem tudja elérni, lehet, hogy meg kell változtatnod a jogosultságokat.</para>

<para>
[Technikai megjegyzés: Ha régebbi a modemed például amin még Rockwell márkajelzés van és nem Conexant, akkor jelenleg nem fogod tudni használni ezt az eszközmeghajtót. Szintén nem lehet használni azokat a modemeket, amelyek SmartDAA-t használnak. Olvasd el a <ulink url="http://www.mbsi.ca/hcflinux/latest/BUGS.txt"><citetitle>http://www.mbsi.ca/hcflinux/latest/BUGS.txt</citetitle></ulink> leírést.]
</para>
</sect2>
</sect1>

<sect1 id="getting-started">
	<title>A modem típusának megállapítása</title>

<para>
Először állapítsd meg,  HCF vagy HSF lapkakészletű modemed van. Sajnos a hagyományos módszerek (/proc/pci fájlrendszer használata, lspci parancs vagy a KDE Control Center) itt nem működik a pci.ids fájlban lévő  hiba miatt, ami a modem helytelen felismerését okozza. Háromféle módszert lehet használni a lapkakészlet típusának megállapítására:
</para>

<orderedlist numeration="arabic">
<listitem>
<para>
Ha a modemed Windows alatt is működik, töltsd le, és futtasd a <ulink url="http://www.conexant.com/customer/md_driverassistance.html"><citetitle>Conexant-féle ListModem alkalmazást</citetitle></ulink>. A kívánt információt a "MODEM TYPE" alatt jeleníti meg a program.
</para>
</listitem>

<listitem>
<para>
Ha felnyitod a géped, jó eséllyel meg fogod találni a modemed lapkakészletén  a HSF vagy a HCF jelzést.
</para>
</listitem>

<listitem>
<para>
Megállapítható a modem típusa az eszközazonosítóból és gyártóazonosítóból is. Ezt az információt legkönnyebben az <command>lspci -n</command> paranccsal (vagy régebbi Linux terjesztésekben a <command>less /proc/pci</command> paranccsal) szerezheted meg. Ez a parancs listázza a gépben lévő összes PCI kártya eszköz- és gyártóazonosítóját. A modemed azonosítóját úgy ismerheted fel, hogy 14F1 (Conexant) vagy 127A (Rockwell) lesz a gyártóazonosító (vendorID). Ne vedd figyelembe akár HSF-nek akár HCF-nek ismeri fel az lspci a modemed, mert ez hibás is lehet.
</para>
<para>Az információ általában a VVVV:DDDD formában jelenik meg, ahol VVVV a gyártóazonosító, a DDDD pedig az eszközazonosító. Például, ha 127a:2005 jelent meg, akkor ez azt jelenti, hogy a gyártóazonosító kódja a 127a, míg az eszközazonosító a 2005.</para>

<para>
Ha a modemed egy HCF modem, akkor a gyártóazonosítója az alábbiak valamelyike lesz:
</para><para>
1033 / 1034 / 1035 / 1036 / 10b3 / 10b4 / 10b5 / 10b6 / 1003 / 1004 / 1005 / 1023 / 1024 / 1025 / 1f10 / 1f11 / 1f14 / 1f15
</para><para>
Ha a modemed SmartHCF modem, akkor az alábbiak közül fog kikerülni a gyártóazonosító:
</para><para>
1052 / 1053 / 1054 / 1055 / 1056 / 1057 / 1058 / 1059 / 1063 / 1064 / 1065 / 1066
</para><para>
Ha HSF modemed van, akkor a gyártóazonosító az alábbiak lehetnek:
</para><para>
2013 / 2014 / 2015 / 2016 / 2003 / 2004 / 2005 / 2006 / 2f10 / 2f12 / 2f00
</para><para>
Ha pedig SmartHSF modemed van, akkor ezek fordulhatnak elő gyártóazonosítóként:
</para><para>
2043 / 2044 / 2045 / 2046 / 2053 / 2054 / 2055 / 2056
</para>

</listitem>
</orderedlist>

<para>
	Ha HCF vagy SmartHCF modemed van, akkor ugorj a <link linkend="hcf">"HCF lapkakészletű modemek"</link>fejezetre, ha pedig HSF vagy SmartHSF modemed van, akkor ugorj a <link linkend="hsf">"HSF lapkakészletű modemek"</link>fejezetre.
</para>
</sect1>

<sect1 id="hcf">
<title>HCF lapkakészletű modemek</title>
<sect2 id="hcf-history">
<title>Áttekintés</title>

<para>
Sajnos jelenleg nincs HCF eszközmeghajtó Linuxhoz. A Conexant GYIK (<ulink url="http://www.conexant.com:80/cnxt/customer/md_faqs.htm"><citetitle>http://www.conexant.com:80/cnxt/customer/md_faqs.htm</citetitle></ulink>) 11. pontjában viszont jelezték, hogy fejlesztés alatt áll.
</para>

<para>
Többen ugyan jelezték, hogy sikerült a HCF lapkakészletű modemeiket (főleg az 1025-ös gyártóazonosítójú modelleket) beüzemelni a HSF meghajtóval, bár minderről csak elvétve vannak információink. Ha sikerült beállítanod és használnod egy HCF modemet Linux alatt, kérlek keress meg.
</para>
<para>
Valaki már közreadta, ha a "No Dialtone" hibaüzenetet kapjuk, amikor HSF meghajtót használunk egy HCF modemmel, akkor a következő AT paranccsal lehet javítani a hibát: "AT S7=45 S0=0 L1 V1 X4 &amp;c1 E1 Q0".
</para>
</sect2>

<sect2 id="misc-hcf">
<title>További információk</title>
<para>
Ha esetleg saját magadnak szeretnél egy meghajtót írni, a következő hivatkozások hasznosak lehetnek:</para>

<variablelist>

<varlistentry>
<term>Az INF file szerkesztése:</term>
<listitem>
<para>
<ulink url="http://users.freenet.am/~hcfconf/advdocs/country.zip"><citetitle>http://users.freenet.am/~hcfconf/advdocs/country.zip</citetitle></ulink>
</para>
</listitem>
</varlistentry>

<varlistentry>
<term>Modem parancsok ismertetője:</term>
<listitem>
<para>
<ulink url="http://users.freenet.am/~hcfconf/advdocs/100498C.zip"><citetitle>http://users.freenet.am/~hcfconf/advdocs/100498C.zip</citetitle></ulink>
</para>
</listitem> 
</varlistentry>

<varlistentry>
<term>Tervezői megjegyzések és specifikációk:</term>
<listitem>
<para>
<ulink url="http://www.unitronic.de/Hersteller/conexant/Modem.htm"><citetitle>http://www.unitronic.de/Hersteller/conexant/Modem.htm
</citetitle>
</ulink></para>
</listitem>
</varlistentry>
</variablelist>

</sect2>
</sect1>

<sect1 id="hsf">
<title>HSF lapkakészletű modemek</title>
<sect2 id="hsf-history">
<title>Áttekintés</title>
<para>
A HSF meghajtó a semmiből jelent meg 2000 közepén, amikor az Olitec közzétett egy bináris meghajtót az Olitec PCI modemhez, a 2.2.14-es rendszermaghoz. Nem sokkal ezután valaki rájött, hogy az Olitec modem a Conexant/Rockwell HSF lapkakészletén alapul. Az érdeklődők az Olitec-től megtudhatták, hogy a meghajtó bármilyen HSF lapkakészletű modemmel működnie kellene, mert nem tartalmaz semmilyen Olitec specifikus elemet. Sokan sikertelenül próbálkoztak, hogy beüzemeljék az Olitec eszközmeghajtót nem Olitec modemmel, mígnem néhány hónappal később, sok ember még több órás próbálkozása után néhánynak sikerült eljutnia a megoldáshoz. Ez egy egyszerű változtatás volt egy fájlban. Így a világ hozzájutott egy működő HSF meghajtóhoz, ami csak a 2.2.14-es rendszermagokon működött. Az Olitec megtagadta a forrás közzétételét, hogy a közösség megpróbálja más verziójú rendszermag alatt is működőképessé tenni.
</para>
<para>
Néhány hónappal később az Olitec közzétette a meghajtót a 2.2.16 és a 2.2.17 verziójú rendszermagokhoz is, ami megelégedésére szolgált a HSF winmodem közösségnek mindaddig, amíg egy napon meg nem jelent a 2.4-es rendszermag. Egyik korábbi meghajtó sem működött a 2.4 rendszermag alatt és ez problémát jelentett mindazoknak, akik frissíteni akartak az új rendszermagra illetve mindazoknak a felhasználóknak, akik valamelyik 2.4.* rendszermag-alapú terjesztést használták, mint például a Mandrake 8 és a RedHat 7.1. A 2.4-es rendszermag megjelenése óta semmit nem lehet hallani az Olitec háza tájáról, de időközben a Conexant bejelentette, hogy tervezik egy Linux eszközmeghajtó fejlesztését. Több hónapi várakozás után végülis Marc Boucher elhatározta, hogy tesz valamit és írt egy illesztőfelületet, ami lehetővé teszi a régebbi eszközmeghajtókat használatát 2.4.* rendszermagokkal is.
</para><para>
Itt tartunk jelenleg, Marc illesztőfelülete még mindig fejlesztői stádiumban van, de működik és sok ember használja, hogy Linux alatt az Internetre kapcsolódjon.
</para><para>
Ezután az áttekintés után már érthető miért kell a következő fejezetet két részre bontani, egyik a 2.2.14 -2.2.18, míg a másik a 2.4.* rendszermagokról szól. Ha nem tudnád milyen rendszermagod van, használd a "<command>uname -r</command>" parancsot, mielőtt továbblépsz a HOGYAN megfelelő részéhez.
</para>
</sect2>

<sect2 id="kernel14-18">
<title>Rendszermag 2.2.14 - 18</title>
<sect3 id="requirements">
<title>Követelmények</title>
<para>
	A 2.2.14, 2.2.16 vagy a 2.2.17 verziójú rendszermagok valamelyike.

	A 2.2.17 rendszermaghoz használatos eszközmeghajtó működik a 2.2.18-as rendszermaggal is .
</para>
</sect3>
<sect3 id="hsf-getting-ids">
<title>Azonosítók</title>
<para>
A modem beüzemeléséhez tudnod kell a modem gyártóazonosítóját (Vendor ID) és eszközazonosítóját (Device ID). A legkönnyebben ezt a "<command>less /proc/pci</command>" parancs kiadásával teheted meg, és addig keress amíg meg nem találod azt a PCI kártyát, amelynek a gyártóazonosítója vagy 14F1 (Conexant) vagy 127A (Rockwell), majd jegyezd fel az eszközazonosítót.

</para>
<para>
A későbbiekben szerkesztened kell egy %HSFModem% sort.
</para><para>
Másold ki a következő sort valahová:
</para><para>
%HSFModem%  = ModemX, PCI\VEN_XXXX&amp;DEV_YYYY&amp;SUBSYS_YYYYXXXX
</para><para>
ahol, az XXXX helyére a gyártóazonosító, az YYYY helyére padig az eszközazonosító kerül. Például, ha a gyártóazonosítód 127A az eszközazonosítód pedig 2015, akkor a sor a következőképp néz ki:
</para><para>
%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_2015&amp;SUBSYS_2015127A
</para><para>A későbbiekben szükséged lesz erre a sorra, hogy a meghajtó fel tudja ismerni a modemet. A következő lépés kicsit eltérő az egyes rendszermag-verziók esetében, tehát lépj a vonatkozó fejezethez, attól függően, hogy <link linkend="kernel-14">2.2.14</link>, <link linkend="kernel-16">2.2.16</link> vagy <link linkend="kernel-17">2.2.17</link> verziójú rendszermagot használsz.</para>
</sect3>

<sect3 id="kernel-14">
<title>Beállítás 2.2.14 rendszermaghoz</title>

<orderedlist>
<title>A HSF meghajtó telepítése 2.2.14-es rendszermaghoz</title>
<listitem>
<para>
	Töltsd le a HSF_V1.01.02_K2.2.14-5.0.tar fájlt, az <ulink url="http://www.olitec.com/pub/HSF_V1.01.02_K2.2.14-5.0.tar"><citetitle>Olitec webhelyéről</citetitle></ulink> vagy a <ulink url="ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/HSF_V1.01.02_K2.2.14-5.0.tar"><citetitle>tükrözéséről</citetitle></ulink>.
</para>
</listitem>
	<listitem>
	<para>Másold be a saját home könyvtáradba</para>
	</listitem>
	<listitem>
	<para>Egy konzol ablakban lépj be a home könyvtáradba</para>
	<para><prompt>&pt;</prompt><command>cd ~</command></para>
	</listitem>
	<listitem>

	<para>Csomagold ki a fájlt</para>
	<para><prompt>&pt;</prompt><command>tar xzvf HSF_V1.01.02_K2.2.14-5.0.tar</command></para>
	</listitem>
	<listitem>

<para>Lépj be az eszközmeghajtó könyvtárába</para>
	<para><prompt>&pt;</prompt><command>cd pci_56k_v2</command></para>
	</listitem>
	<listitem>

	<para>Kedvenc szövegszerkesztőddel nyisd meg a lin_hsf.inf file-t, a [generic] rész alatt ehhez hasonló sorokat találsz: "%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_1025&amp;SUBSYS_1025127A". Ezek alá a sorok alá illeszd be azt a %HSFModem% sort, amit korábban készítettél.</para>
	</listitem>
	<listitem>

	<para>Válts root felhasználóra</para>
	<para><prompt>&pt;</prompt><command>su</command></para>
	</listitem>
	<listitem>

<para> Futtasd az ins_all szkriptet az eszközmeghajtó telepítéséhez.</para>
	<para><prompt>&pt;</prompt><command>./ins_all</command></para>
	</listitem>

	</orderedlist>
	<para>A tárcsázóprogramnak be kell állítani, hogy a modem a /dev/modem alatt található, most már el tudod érni az Internetet.</para>
	<para>Az ins_all csak ideiglenesen tölti be a modem-meghajtót, ami eltávolítódik újraindításkor. Tehát újraindításkor újra kell futtatni az ./ins_all programot, hogy újra betöltse a meghajtót vagy be kell állítanod, hogy az ./ins_all parancs automatikusan lefusson minden újraindításkor.
	</para>

<!--	
	
	Copy it to your home directory and use the following command tar xzvf HSF_V1.01.02_K2.2.14-5.0.tar
	
	cd pci_56k_v2

	Load up the lin_hsf.inf file in your favourite text editor, under the section [generic] you'll see a few of lines like "%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_1025&amp;SUBSYS_1025127A" under theses lines add your own %HSFModem% line which you made eariler.
	
	Switch to root

	enter ./ins_all and the modem should install itself.

	You will now be able to access the internet by telling your dial-up software that your modem is located at /dev/modem.

	The ins_all will only temporarily load the modem driver and the modem driver will be removed when you reboot. So if you reboot you will need to run the ./ins_all program to reload the driver, if you reboot on a regular basis you may want to set the ./ins_all command to automatically run every time your computer loads up.

	Errors
	
	When running ./ins_all I get a kernel mismatch error ?

	This means that the driver thinks that you don't have a 2.2.14 kernel, if you have a variant of the 2.2.14 kernel (such as the one that comes with Mandrake 7) then you can still get the driver to work by loading up the file ins_all in a text editor and replacing all of the "insmod -m" commands with "insmod -f -m".

	When installing the driver when it tries to load myserial.o I get a segmentation fault ?

	This is caused by your computer trying to get Plug-and-Play to work with your modem. You can stop it doing this by going to your BIOS and setting an option which tells it not to do that. The settings name varies from BIOS to BIOS but is normally something like PnP OS.

	After installing the driver my Laptop's modem doesn't seem to work ?

	Sometime this is caused by a device conflict, you can correct it by editing the ins_all script by finding the line "mknod /dev/cnxt0 c 254 64" and replacing it with "mknod /dev/cnxt0 c 253 64"
</para>
-->
</sect3>

<sect3 id="kernel-16">

<title>Beállítás 2.2.16 rendszermaghoz</title>	
<orderedlist>
<listitem>
<para>
Töltsd le a PCI_56K_V2_K2.2.16.tar.gz fájlt, az <ulink url="http://www.olitec.com/pub/PCI_56K_V2_K2.2.16.tar.gz"><citetitle>Olitec webhelyéről</citetitle></ulink> vagy <ulink url="ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/PCI_56K_V2_K2.2.16.tar.gz"><citetitle>tükrözéséről</citetitle></ulink>.
	</para>
</listitem>
<listitem>
<para>Másold be a home könyvtáradba</para>
</listitem>
<listitem>
<para>Egy konzol ablakban lépj be a home könyvtáradba</para>
<para><prompt>&pt;</prompt><command>cd ~</command></para>
</listitem>
<listitem>

<para>Csomagold ki a fájlt</para>
<para><prompt>&pt;</prompt><command>tar xzvf PCI_56K_V2_K2.2.16.tar.gz</command></para> 
</listitem>
<listitem>

<para>Lépj be az eszközmeghajtó könyvtárába</para>
<para><prompt>&pt;</prompt><command>cd pci_56k_v2_k2.2.16</command></para>
</listitem>
<listitem>

<para>Kedvenc szövegszerkesztőddel nyisd meg a lin_hsf.inf fájlt, a [generic] rész alatt ehhez hasonló sorokat találsz: "%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_1025&amp;SUBSYS_1025127A". Ezek alá a sorok alá illeszd be azt a %HSFModem% sort, amit korábban készítettél.</para>
</listitem>
<listitem>

<para>Válts root felhasználóra</para>
<para><prompt>&pt;</prompt><command>su</command></para>
</listitem>
<listitem>

<para> Futtasd az ins_all szkriptet az eszközmeghajtó telepítéséhez.</para>
<para><prompt>&pt;</prompt><command>./ins_all</command></para>
</listitem>

</orderedlist>

<para>A tárcsázóprogramnak be kell állítanod, hogy a modem a /dev/modem alatt található. Most már el tudod érni az Internetet.</para>

<para>Az ins_all csak ideiglenesen tölti be a modem-meghajtót, ami eltávolítódik újraindításkor. Tehát újraindításkor újra kell futtatni az ./ins_all programot, hogy újra betöltse a meghajtót, vagy be kell állítanod, hogy az ./ins_all parancs automatikusan lefusson minden újraindításkor.
</para>
</sect3>

<sect3 id="kernel-17">
<title>Beállítás 2.2.17 vagy 2.2.18 rendszermaghoz</title>

<orderedlist>
<title>A HSF meghajtó telepítése 2.2.17-es és 2.2.18 rendszermagokhoz</title>
<listitem>
<para>
Töltsd le a PCI_56K_V2_K2.2.17.tar.gz fájlt, az <ulink url="http://www.olitec.com/pub/PCI_56K_V2_K2.2.16.tar.gz"><citetitle>Olitec webhelyéről</citetitle></ulink> vagy <ulink url="ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/PCI_56K_V2_K2.2.16.tar.gz"><citetitle>tükrözéséről</citetitle></ulink>.
	</para>
	</listitem>
	<listitem>
	<para>Másold be a home könyvtáradba</para>
	</listitem>
	<listitem>
	<para>Egy konzol ablakban lépj be a home könyvtáradba</para>
	<para><prompt>&pt;</prompt><command>cd ~</command></para>
	</listitem>
	<listitem>
<para> Csomagold ki a fájlt</para>
	<para><prompt>&pt;</prompt><command>tar xzvf PCI_56K_V2_K2.2.17.tar.gz</command></para>
	</listitem>
	<listitem>

<para> Lépj be az eszközmeghajtó könyvtárába</para>
	<para><prompt>&pt;</prompt><command>cd pci_56k_v2_k2.2.17</command></para>
	</listitem>
	<listitem>

	<para>Kedvenc szövegszerkesztőddel nyisd meg a lin_hsf.inf file-t, a [generic] rész alatt ehhez hasonló sorokat találsz: "%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_1025&amp;SUBSYS_1025127A". Ezek alá a sorok alá illeszd be azt a %HSFModem% sort, amit korábban készítettél.</para>
	</listitem>
	<listitem>

	<para>Válts root felhasználóra</para>
	<para><prompt>&pt;</prompt><command>su</command></para>
	</listitem>
	<listitem>

<para>Futtasd az ins_all szkriptet az eszközmeghajtó telepítéséhez.</para>
	<para><prompt>&pt;</prompt><command>./ins_all</command></para>
	</listitem>

	</orderedlist>

				
<!--
<para>
	Download the file PCI_56K_V2_K2.2.17.tar.gz  from:
	http://olitec.com/pub/PCI_56K_V2_K2.2.17.tar.gz
	
	Mirror:
ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/PCI_56K_V2_K2.2.17.tar.gz

	Copy it to your home directory and use the following command tar xzvf PCI_56K_V2_K2.2.17.tar.gz
	
	cd pci_56k_v2_k2.2.17

	Load up the lin_hsf.inf file in your favorite text editor, under the section [generic] you'll see a few of lines like "%HSFModem%  = ModemX, PCI\VEN_127A&amp;DEV_1025&amp;SUBSYS_1025127A" under theses lines add your own %HSFModem% line which you made earlier.
	
	Switch to root

	enter ./ins_all and the modem should install itself.
-->
<para>A tárcsázóprogramnak be kell állítani, hogy a modem a /dev/modem alatt található. Most már el tudod érni az Internetet.</para>

<para>Az ins_all csak ideiglenesen tölti be a modem-meghajtót, ami eltávolítódik újraindításkor. Tehát újraindításkor újra kell futtatni az ./ins_all programot, hogy újra betöltse a meghajtót, vagy be kell állítanod, hogy az ./ins_all parancs automatikusan lefusson minden újraindításkor.
</para>
<para>

</sect3>
</sect2>

<sect2 id="kernel4-series">
<title>Beállítás 2.4.* rendszermagokhoz</title>
<sect3 id="hsf-24-requirements">
<title>Követelmények</title>

<itemizedlist mark="opencircle">

<listitem>
<para>
Olyan 2.4.* rendszermag-verzióra van szükséged, amiben nincs többprocesszoros támogatás (SMP support).
</para>
</listitem>

<listitem>
<para>
Továbbá szükséged lesz a rendszermag forrására, ha nincs telepítve valószínűleg meg fogod találni a Linux-terjesztésedd CD-jén.
</para>
</listitem>

<listitem>
<para>
A ppp legalább 2.4.0-es verziója (a telepített ppp verziója ellenőrizhető a <command>pppd --version</command>paranccsal.)
</para>
</listitem>


</itemizedlist>
<para>A modem 2.4.* rendszermag alatti működéséhez szükséged lesz a 2.2.17 rendszermaghoz használatos eszközmeghajtóra, valamint Marc Boucher hsfcompat illesztőfelületére, ami lehetővé teszi, hogy az eszközmeghajtó a 2.4.* rendszermagok alatt is működjön. A HOGYAN írásának idejében a hsfcompat 1.0d verziója a legfrissebb. Még teszt állapotban van, tehát előfordulhatnak problémák a rendszereden. Viszont még nem találkoztam senkivel, akinek bármilyen problémája származott volna abból, hogy használta ezt az illesztőfelületet. A legfrissebb információkért keresd fel a <ulink url="http://www.mbsi.ca/hsfcompat/"><citetitle>hsfcompat honlapját</citetitle></ulink>.</para>

<variablelist><title>Szükséges fájlok:</title>
<varlistentry><term><filename>hsfcompat_24-1.0d.tar.gz</filename></term>
<listitem>
<para>
Letölthető:
</para>
<para>
<ulink url="http://www.mbsi.ca/hsfcompat/hsfcompat_24-1.0d.tar.gz"><citetitle>http://www.mbsi.ca/hsfcompat/hsfcompat_24-1.0d.tar.gz</citetitle></ulink></para><para></para>
</listitem>
</varlistentry>

<varlistentry>
<term><filename>PCI_56K_V2_K2.2.17.tar.gz</filename></term>
<listitem>
<para>letölthető:</para>
<para><ulink url="http://www.olitec.com/pub/PCI_56K_V2_K2.2.17.tar.gz"><citetitle>http://www.olitec.com/pub/PCI_56K_V2_K2.2.17.tar.gz</citetitle></ulink></para>
<para>tükrözve:</para>
<para>
<ulink url="ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/PCI_56K_V2_K2.2.17.tar.gz"><citetitle>ftp://ftp.dina.kvl.dk/pub/Staff/Thomas.S.Iversen/linmodems_drivers/olitec/PCI_56K_V2_K2.2.17.tar.gz</citetitle></ulink></para>
</listitem>
</varlistentry>
</variablelist>

</sect3>
<sect3 id="hsf-24-installing">
<title>Telepítés</title>


<orderedlist>

<listitem>
<para>Másold a <filename>hsfcompat_24-1.0d.tar.gz</filename> fájlt a home könyvtáradba</para>
</listitem>

<listitem>
<para>Egy konzolablakban lépj be a home könyvtáradba</para>
<para><prompt>&pt;</prompt><command>cd ~</command></para>
</listitem>


<listitem>
<para>Csomagold ki a hcfcompat programot a</para>
<para><prompt>&pt;</prompt><command>tar xzvf <filename>hsfcompat_24-1.0d.tar.gz</filename></command>paranccsal</para>
</listitem>
<listitem>
<para>
Másold át a <filename>PCI_56K_V2_K2.2.17.tar.gz</filename> fájlt a <filename class="directory">hsfcompat_24-1.0d</filename> könyvtárba.
</para>
</listitem>
<listitem>
<para>Csomagold ki az eszközmeghajtót a </para>
<para>
<prompt>&pt;</prompt><command>tar xzvf <filename>PCI_56K_V2_K2.2.17.tar.gz</filename></command>
paranccsal</para>
</listitem>
<listitem>
<para>
Nyisd meg a <filename>Makefile</filename>-t (ami a  <filename class="directory">hsfcompat_24-1.0d</filename> könyvtárban van) egy  szövegszerkesztővel, keresd meg azt a sort amelyben azt találod: SBINDIR=/usr/sbin és cseréld ki az <filename class="directory">/usr/sbin</filename> bejegyzést arra az elérési útvonalra, ahol a saját gépeden a futtatható fájlok találhatók, majd keresd meg a KERNELSRC=/usr/src/linux sort, itt is cseréld ki a <filename class="directory">/usr/src/linux</filename> sort a rendszermag-forrásod elérési útvonalára.
</para>
</listitem>
<listitem>
<para>Válts root felhasználóra az :</para>
<para><prompt>&pt;</prompt><command>su</command>

paranccsal</para>
</listitem>
<listitem>
<para>
A <filename class="directory">hsfcompat_24-1.0d</filename> könyvtárban fordítsd le (compile) a hsfcompat programot:</para>
<para>
<prompt>&pt;</prompt>
<command>
make</command>
</para>
</listitem>
<listitem>
<para>Telepítsd az eszközmeghajtót:
<prompt>&pt;</prompt><command>make <parameter>install</parameter></command>
</para>
</listitem>
<listitem>
<para>
Kövesd a képernyőn megjelenő utasításokat, amelyek leírják az eszközmeghajtó betöltését a memóriába, valamint ennek automatikus végrehajtását.
</para>
</listitem>
</orderedlist>

</sect3>
</sect2>
<sect2 id="faq">
<title>Gyakran Ismételt Kérdések</title>

<qandaset>
<qandaentry>
<question>
<para>
Az ./ins_all futtatásakor "kernel mismatch" hibaüzenetet kapok.
</para>
</question>
<answer>
<para>
Ez azt jelenti, hogy az eszközmeghajtó azt érzékeli, nem a megfelelő rendszermag-verziód van, ebben az esetben egy módosított rendszermagod van (például olyan, aminek nem szabványos a neve). Ekkor úgy tudod elindítani az eszközmeghajtót, hogy megnyitod az <filename>ins_all</filename> fájlt egy szövegszerkesztőben, és kicseréled az összes "<command>insmod -m</command>" parancsot "<command>insmod -f -m</command>" parancsra.
</para>
</answer>
</qandaentry>

<qandaentry>
<question>
<para>
Amikor próbálom futtatni az ./ins_all szkriptet, a következő hibaüzenetet kapom "bash: ./ins_all No such file or directory."</para>
</question>
<answer>
<para>
Ezt a hibát az okozza, hogy a szkript nem találja a C Shellt az <filename class="directory">/bin/csh</filename> elérési úton. Ha nálad a C Shell eltérő helyre van telepítve, akkor készíts egy szimbolikus hivatkozást (simlink), ami a megfelelő helyre mutat. Ha nincs C shelled, akkor telepítened kell.
</para>
</answer>
</qandaentry>

<qandaentry>
<question>
<para>
Telepítés közben, amikor az eszközmeghajtó próbálja betölteni a <filename>myserial.o</filename> fájlt "segmentation fault" hibát kapok.
</para>
</question>
<answer> 
<para>
Ez amiatt van, mert a számítógéped megpróbálja a Plug-and-Play támogatással működtetni a modemed. Ez a BIOS-ban kapcsolható ki. A beállítás az egyes BIOS-ok esetében eltérő, de általában a PnP OS opciót kell kikapcsolni.
</para>
</answer>
</qandaentry>

<qandaentry>
<question>
<para>
Amikor megpróbálom tárcsázni az Internet-szolgáltatót "No Carrier" hibaüzenetet kapok.
</para>
</question>
<answer> 
<para>
Többen jelezték, hogy az alábbi beállításbeli változtatások segítenek:

<orderedlist>
<listitem>
<para>
Az ATZ parancs helyett használd az ATZX3
</para>
</listitem>
<listitem>
<para>
Az ATDT helyett pedig ATX3DT
</para>
</listitem>
</orderedlist>
</para>
</answer>
</qandaentry>

<qandaentry>
<question>
<para>
Az ./ins_all futtatásakor a "No matching INF file is found for SoftK56 PCI device" hibaüzenetet kapok. 
</para>
</question>
<answer>
<para>
Ez akkor történik, amikor az eszközmeghajtó nem találja a helyes %HSFModem% sort a lin_hsf.inf fájlban. Lépj vissza ehhez a részhez és ellenőrizd, hogy mindent a leírás szerint csináltál, és a megfelelő értékek vannak bejegyezve a %HSFModem% sorba.
</para>
</answer>
</qandaentry>



<qandaentry>
<question>
<para>
Úgy látom a laptopomon az eszközmeghajtó rendesen lett telepítve, mégsem érem el a modemet a /dev/modem alatt?
</para>
</question>
<answer>
<para>
Ennek gyakori oka, hogy a modem eszköz sorszáma ütközik a PCMCIA eszköz sorszámával. Ezt a következő paranccsal ellenőrizheted: </para>
<para>&pt;<command>ls -l /dev/ | grep 254</command></para>
<para>A hsf0 eszköz vezérszáma (major number) 254 lesz, ha más eszköznek is ugyanígy 254 a vezérszáma, akkor ez ütközést jelent. Ezt úgy lehet elkerülni, hogy az ins_all fájlban megváltoztatod a "mknod /dev/cnxt c 254 64" sort "mknod /dev/cnxt c 253 64" sorra.
</para>
</answer>
</qandaentry>
</qandaset>
</sect2>
</sect1>

<sect1 id="fdl-app"><title>License</title>

<sect2 id="fdl">

 <sect2info>
   <releaseinfo>
	Version 1.1, March 2000
   </releaseinfo>
      
      <copyright>
	<year>2000</year><holder>Free Software Foundation, Inc.</holder>
      </copyright>
      
      <legalnotice id="legalnotice">
	<para>
	  <address>Free Software Foundation, Inc. 
             <street>59 Temple Place, Suite 330</street>, 
             <city>Boston</city>, 
             <state>MA</state> <postcode>02111-1307</postcode>
	    <country>USA</country></address>. Everyone is permitted to
	    copy and distribute verbatim copies of this license
	    document, but changing it is not allowed.
	</para>
      </legalnotice>
      </sect2info>
<title>GNU Free Documentation License</title>        
  <para>Copyright 2000 Free Software Foundation, Inc.	        
		</para>        
<para>
<address>Free Software Foundation, Inc.
<street>59 Temple Place, Suite 330</street>,
<city>Boston</city>,
<state>MA</state> <postcode>02111-1307</postcode>
<country>USA</country></address>. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.        </para>
  <sect3 id="fdl-preamble">
    <title>0. PREAMBLE</title>
    <para>
      The purpose of this License is to make a manual, textbook, or
      other written document <quote>free</quote> in the sense of
      freedom: to assure everyone the effective freedom to copy and
      redistribute it, with or without modifying it, either
      commercially or noncommercially. Secondarily, this License
      preserves for the author and publisher a way to get credit for
      their work, while not being considered responsible for
      modifications made by others.
    </para>
    
    <para>
      This License is a kind of <quote>copyleft</quote>, which means
      that derivative works of the document must themselves be free in
      the same sense. It complements the GNU General Public License,
      which is a copyleft license designed for free software.
    </para>
    
    <para>
      We have designed this License in order to use it for manuals for
      free software, because free software needs free documentation: a
      free program should come with manuals providing the same
      freedoms that the software does. But this License is not limited
      to software manuals; it can be used for any textual work,
      regardless of subject matter or whether it is published as a
      printed book. We recommend this License principally for works
      whose purpose is instruction or reference.
    </para>
  </sect3>
  <sect3 id="fdl-section1">
    <title>1. APPLICABILITY AND DEFINITIONS</title>
    <para id="fdl-document">
      This License applies to any manual or other work that contains a
      notice placed by the copyright holder saying it can be
      distributed under the terms of this License. The
      <quote>Document</quote>, below, refers to any such manual or
      work. Any member of the public is a licensee, and is addressed
      as <quote>you</quote>.
    </para>
    
    <para id="fdl-modified">
      A <quote>Modified Version</quote> of the Document means any work
      containing the Document or a portion of it, either copied
      verbatim, or with modifications and/or translated into another
      language.
    </para>
	
    <para id="fdl-secondary">
      A <quote>Secondary Section</quote> is a named appendix or a
      front-matter section of the <link
      linkend="fdl-document">Document</link> that deals exclusively
      with the relationship of the publishers or authors of the
      Document to the Document's overall subject (or to related
      matters) and contains nothing that could fall directly within
      that overall subject. (For example, if the Document is in part a
      textbook of mathematics, a Secondary Section may not explain any
      mathematics.)  The relationship could be a matter of historical
      connection with the subject or with related matters, or of
      legal, commercial, philosophical, ethical or political position
      regarding them.
    </para>

    <para id="fdl-invariant">
      The <quote>Invariant Sections</quote> are certain <link
      linkend="fdl-secondary"> Secondary Sections</link> whose titles
      are designated, as being those of Invariant Sections, in the
      notice that says that the <link
      linkend="fdl-document">Document</link> is released under this
      License.
    </para>
    
    <para id="fdl-cover-texts">
      The <quote>Cover Texts</quote> are certain short passages of
      text that are listed, as Front-Cover Texts or Back-Cover Texts,
      in the notice that says that the <link
      linkend="fdl-document">Document</link> is released under this
      License.
    </para>
	
    <para id="fdl-transparent">
      A <quote>Transparent</quote> copy of the <link
      linkend="fdl-document"> Document</link> means a machine-readable
      copy, represented in a format whose specification is available
      to the general public, whose contents can be viewed and edited
      directly and straightforwardly with generic text editors or (for
      images composed of pixels) generic paint programs or (for
      drawings) some widely available drawing editor, and that is
      suitable for input to text formatters or for automatic
      translation to a variety of formats suitable for input to text
      formatters. A copy made in an otherwise Transparent file format
      whose markup has been designed to thwart or discourage
      subsequent modification by readers is not Transparent.  A copy
      that is not <quote>Transparent</quote> is called
      <quote>Opaque</quote>.
    </para>
    
    <para>
      Examples of suitable formats for Transparent copies include
      plain ASCII without markup, Texinfo input format, LaTeX input
      format, SGML or XML using a publicly available DTD, and
      standard-conforming simple HTML designed for human
      modification. Opaque formats include PostScript, PDF,
      proprietary formats that can be read and edited only by
      proprietary word processors, SGML or XML for which the DTD
      and/or processing tools are not generally available, and the
      machine-generated HTML produced by some word processors for
      output purposes only.
    </para>
    
    <para id="fdl-title-page">
      The <quote>Title Page</quote> means, for a printed book, the
      title page itself, plus such following pages as are needed to
      hold, legibly, the material this License requires to appear in
      the title page. For works in formats which do not have any title
      page as such, <quote>Title Page</quote> means the text near the
      most prominent appearance of the work's title, preceding the
      beginning of the body of the text.
    </para>
  </sect3>
    
  <sect3 id="fdl-section2">
    <title>2. VERBATIM COPYING</title>
    <para>
      You may copy and distribute the <link
      linkend="fdl-document">Document</link> in any medium, either
      commercially or noncommercially, provided that this License, the
      copyright notices, and the license notice saying this License
      applies to the Document are reproduced in all copies, and that
      you add no other conditions whatsoever to those of this
      License. You may not use technical measures to obstruct or
      control the reading or further copying of the copies you make or
      distribute. However, you may accept compensation in exchange for
      copies. If you distribute a large enough number of copies you
      must also follow the conditions in <link
      linkend="fdl-section3">section 3</link>.
    </para>
    
    <para>
      You may also lend copies, under the same conditions stated
      above, and you may publicly display copies.
    </para>
    </sect3>
    
  <sect3 id="fdl-section3">
    <title>3. COPYING IN QUANTITY</title>
    <para>
      If you publish printed copies of the <link
      linkend="fdl-document">Document</link> numbering more than 100,
      and the Document's license notice requires <link
      linkend="fdl-cover-texts">Cover Texts</link>, you must enclose
      the copies in covers that carry, clearly and legibly, all these
      Cover Texts: Front-Cover Texts on the front cover, and
      Back-Cover Texts on the back cover. Both covers must also
      clearly and legibly identify you as the publisher of these
      copies. The front cover must present the full title with all
      words of the title equally prominent and visible. You may add
      other material on the covers in addition. Copying with changes
      limited to the covers, as long as they preserve the title of the
      <link linkend="fdl-document">Document</link> and satisfy these
      conditions, can be treated as verbatim copying in other
      respects.
    </para>
    
    <para>
      If the required texts for either cover are too voluminous to fit
      legibly, you should put the first ones listed (as many as fit
      reasonably) on the actual cover, and continue the rest onto
      adjacent pages.
    </para>
    
    <para>
      If you publish or distribute <link
      linkend="fdl-transparent">Opaque</link> copies of the <link
      linkend="fdl-document">Document</link> numbering more than 100,
      you must either include a machine-readable <link
      linkend="fdl-transparent">Transparent</link> copy along with
      each Opaque copy, or state in or with each Opaque copy a
      publicly-accessible computer-network location containing a
      complete Transparent copy of the Document, free of added
      material, which the general network-using public has access to
      download anonymously at no charge using public-standard network
      protocols. If you use the latter option, you must take
      reasonably prudent steps, when you begin distribution of Opaque
      copies in quantity, to ensure that this Transparent copy will
      remain thus accessible at the stated location until at least one
      year after the last time you distribute an Opaque copy (directly
      or through your agents or retailers) of that edition to the
      public.
    </para>
    
    <para>
      It is requested, but not required, that you contact the authors
      of the <link linkend="fdl-document">Document</link> well before
      redistributing any large number of copies, to give them a chance
      to provide you with an updated version of the Document.
    </para>
    </sect3>
    
  <sect3 id="fdl-section4">
    <title>4. MODIFICATIONS</title>
    <para>
      You may copy and distribute a <link
      linkend="fdl-modified">Modified Version</link> of the <link
      linkend="fdl-document">Document</link> under the conditions of
      sections <link linkend="fdl-section2">2</link> and <link
      linkend="fdl-section3">3</link> above, provided that you release
      the Modified Version under precisely this License, with the
      Modified Version filling the role of the Document, thus
      licensing distribution and modification of the Modified Version
      to whoever possesses a copy of it. In addition, you must do
      these things in the Modified Version:
    </para>
    
    <itemizedlist mark="opencircle">
      <listitem>
	<formalpara>
	  <title>A</title>
	  <para>
	    Use in the <link linkend="fdl-title-page">Title
	    Page</link> (and on the covers, if any) a title distinct
	    from that of the <link
	    linkend="fdl-document">Document</link>, and from those of
	    previous versions (which should, if there were any, be
	    listed in the History section of the Document). You may
	    use the same title as a previous version if the original
	    publisher of that version gives permission.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>B</title>
	  <para>
	    List on the <link linkend="fdl-title-page">Title
	    Page</link>, as authors, one or more persons or entities
	    responsible for authorship of the modifications in the
	    <link linkend="fdl-modified">Modified Version</link>,
	    together with at least five of the principal authors of
	    the <link linkend="fdl-document">Document</link> (all of
	    its principal authors, if it has less than five).
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>C</title>
	  <para>
	    State on the <link linkend="fdl-title-page">Title
	    Page</link> the name of the publisher of the <link
	    linkend="fdl-modified">Modified Version</link>, as the
	    publisher.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>D</title>
	  <para>
	    Preserve all the copyright notices of the <link
	    linkend="fdl-document">Document</link>.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>E</title>
	  <para>
	    Add an appropriate copyright notice for your modifications
	    adjacent to the other copyright notices.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>F</title>
	  <para>
	    Include, immediately after the copyright notices, a
	    license notice giving the public permission to use the
	    <link linkend="fdl-modified">Modified Version</link> under
	    the terms of this License, in the form shown in the
	    Addendum below.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>G</title>
	  <para>
	    Preserve in that license notice the full lists of <link
	    linkend="fdl-invariant"> Invariant Sections</link> and
	    required <link linkend="fdl-cover-texts">Cover
	    Texts</link> given in the <link
	    linkend="fdl-document">Document's</link> license notice.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>H</title>
	  <para>
	    Include an unaltered copy of this License.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>I</title>
	  <para>
	    Preserve the section entitled <quote>History</quote>, and
	    its title, and add to it an item stating at least the
	    title, year, new authors, and publisher of the <link
	    linkend="fdl-modified">Modified Version </link>as given on
	    the <link linkend="fdl-title-page">Title Page</link>.  If
	    there is no section entitled <quote>History</quote> in the
	    <link linkend="fdl-document">Document</link>, create one
	    stating the title, year, authors, and publisher of the
	    Document as given on its Title Page, then add an item
	    describing the Modified Version as stated in the previous
	    sentence.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>J</title>
	  <para>
	    Preserve the network location, if any, given in the <link
	    linkend="fdl-document">Document</link> for public access
	    to a <link linkend="fdl-transparent">Transparent</link>
	    copy of the Document, and likewise the network locations
	    given in the Document for previous versions it was based
	    on. These may be placed in the <quote>History</quote>
	    section.  You may omit a network location for a work that
	    was published at least four years before the Document
	    itself, or if the original publisher of the version it
	    refers to gives permission.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>K</title>
	  <para>
	    In any section entitled <quote>Acknowledgements</quote> or
	    <quote>Dedications</quote>, preserve the section's title,
	    and preserve in the section all the substance and tone of
	    each of the contributor acknowledgements and/or
	    dedications given therein.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>L</title>
	  <para>
	    Preserve all the <link linkend="fdl-invariant">Invariant
	    Sections</link> of the <link
	    linkend="fdl-document">Document</link>, unaltered in their
	    text and in their titles.  Section numbers or the
	    equivalent are not considered part of the section titles.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>M</title>
	  <para>
	    Delete any section entitled
	    <quote>Endorsements</quote>. Such a section may not be
	    included in the <link linkend="fdl-modified">Modified
	    Version</link>.
	  </para>
	</formalpara>
      </listitem>
      
      <listitem>
	<formalpara>
	  <title>N</title>
	  <para>
	    Do not retitle any existing section as
	    <quote>Endorsements</quote> or to conflict in title with
	    any <link linkend="fdl-invariant">Invariant
	    Section</link>.
	  </para>
	</formalpara>
      </listitem>
    </itemizedlist>
    
    <para>
      If the <link linkend="fdl-modified">Modified Version</link>
      includes new front-matter sections or appendices that qualify as
      <link linkend="fdl-secondary">Secondary Sections</link> and
      contain no material copied from the Document, you may at your
      option designate some or all of these sections as invariant. To
      do this, add their titles to the list of <link
      linkend="fdl-invariant">Invariant Sections</link> in the
      Modified Version's license notice.  These titles must be
      distinct from any other section titles.
    </para>
    
    <para>
      You may add a section entitled <quote>Endorsements</quote>,
      provided it contains nothing but endorsements of your <link
      linkend="fdl-modified">Modified Version</link> by various
      parties--for example, statements of peer review or that the text
      has been approved by an organization as the authoritative
      definition of a standard.
    </para>
    
    <para>
      You may add a passage of up to five words as a <link
      linkend="fdl-cover-texts">Front-Cover Text</link>, and a passage
      of up to 25 words as a <link
      linkend="fdl-cover-texts">Back-Cover Text</link>, to the end of
      the list of <link linkend="fdl-cover-texts">Cover Texts</link>
      in the <link linkend="fdl-modified">Modified Version</link>.
      Only one passage of Front-Cover Text and one of Back-Cover Text
      may be added by (or through arrangements made by) any one
      entity. If the <link linkend="fdl-document">Document</link>
      already includes a cover text for the same cover, previously
      added by you or by arrangement made by the same entity you are
      acting on behalf of, you may not add another; but you may
      replace the old one, on explicit permission from the previous
      publisher that added the old one.
    </para>
    
    <para>
      The author(s) and publisher(s) of the <link
      linkend="fdl-document">Document</link> do not by this License
      give permission to use their names for publicity for or to
      assert or imply endorsement of any <link
      linkend="fdl-modified">Modified Version </link>.
    </para>
  </sect3>
    
  <sect3 id="fdl-section5">
    <title>5. COMBINING DOCUMENTS</title>
    <para>
      You may combine the <link linkend="fdl-document">Document</link>
      with other documents released under this License, under the
      terms defined in <link linkend="fdl-section4">section 4</link>
      above for modified versions, provided that you include in the
      combination all of the <link linkend="fdl-invariant">Invariant
      Sections</link> of all of the original documents, unmodified,
      and list them all as Invariant Sections of your combined work in
      its license notice.
    </para>
    
    <para>
      The combined work need only contain one copy of this License,
      and multiple identical <link linkend="fdl-invariant">Invariant
      Sections</link> may be replaced with a single copy. If there are
      multiple Invariant Sections with the same name but different
      contents, make the title of each such section unique by adding
      at the end of it, in parentheses, the name of the original
      author or publisher of that section if known, or else a unique
      number. Make the same adjustment to the section titles in the
      list of Invariant Sections in the license notice of the combined
      work.
    </para>
    
    <para>
      In the combination, you must combine any sections entitled
      <quote>History</quote> in the various original documents,
      forming one section entitled <quote>History</quote>; likewise
      combine any sections entitled <quote>Acknowledgements</quote>,
      and any sections entitled <quote>Dedications</quote>.  You must
      delete all sections entitled <quote>Endorsements.</quote>
    </para>
    </sect3>
    
  <sect3 id="fdl-section6">
    <title>6. COLLECTIONS OF DOCUMENTS</title>
    <para>
      You may make a collection consisting of the <link
      linkend="fdl-document">Document</link> and other documents
      released under this License, and replace the individual copies
      of this License in the various documents with a single copy that
      is included in the collection, provided that you follow the
      rules of this License for verbatim copying of each of the
      documents in all other respects.
    </para>
    
    <para>
      You may extract a single document from such a collection, and
      distribute it individually under this License, provided you
      insert a copy of this License into the extracted document, and
      follow this License in all other respects regarding verbatim
      copying of that document.
    </para>
    </sect3>
    
  <sect3 id="fdl-section7">
    <title>7. AGGREGATION WITH INDEPENDENT WORKS</title>
    <para>
      A compilation of the <link
      linkend="fdl-document">Document</link> or its derivatives with
      other separate and independent documents or works, in or on a
      volume of a storage or distribution medium, does not as a whole
      count as a <link linkend="fdl-modified">Modified Version</link>
      of the Document, provided no compilation copyright is claimed
      for the compilation.  Such a compilation is called an
      <quote>aggregate</quote>, and this License does not apply to the
      other self-contained works thus compiled with the Document , on
      account of their being thus compiled, if they are not themselves
      derivative works of the Document.  If the <link
      linkend="fdl-cover-texts">Cover Text</link> requirement of <link
      linkend="fdl-section3">section 3</link> is applicable to these
      copies of the Document, then if the Document is less than one
      quarter of the entire aggregate, the Document's Cover Texts may
      be placed on covers that surround only the Document within the
      aggregate. Otherwise they must appear on covers around the whole
      aggregate.
    </para>
    </sect3>
    
  <sect3 id="fdl-section8">
    <title>8. TRANSLATION</title>
    <para>
      Translation is considered a kind of modification, so you may
      distribute translations of the <link
      linkend="fdl-document">Document</link> under the terms of <link
      linkend="fdl-section4">section 4</link>. Replacing <link
      linkend="fdl-invariant"> Invariant Sections</link> with
      translations requires special permission from their copyright
      holders, but you may include translations of some or all
      Invariant Sections in addition to the original versions of these
      Invariant Sections. You may include a translation of this
      License provided that you also include the original English
      version of this License. In case of a disagreement between the
      translation and the original English version of this License,
      the original English version will prevail.
    </para>
    </sect3>
    
  <sect3 id="fdl-section9">
    <title>9. TERMINATION</title>
    <para>
      You may not copy, modify, sublicense, or distribute the <link
      linkend="fdl-document">Document</link> except as expressly
      provided for under this License. Any other attempt to copy,
      modify, sublicense or distribute the Document is void, and will
      automatically terminate your rights under this License. However,
      parties who have received copies, or rights, from you under this
      License will not have their licenses terminated so long as such
      parties remain in full compliance.
    </para>
    </sect3>
    
  <sect3 id="fdl-section10">
    <title>10. FUTURE REVISIONS OF THIS LICENSE</title>
    <para>
      The <ulink type="http"
      url="http://www.gnu.org/fsf/fsf.html">Free Software
      Foundation</ulink> may publish new, revised versions of the GNU
      Free Documentation License from time to time. Such new versions
      will be similar in spirit to the present version, but may differ
      in detail to address new problems or concerns. See <ulink
      type="http"
      url="http://www.gnu.org/copyleft">http://www.gnu.org/copyleft/</ulink>.
    </para>
    
    <para>
      Each version of the License is given a distinguishing version
      number. If the <link linkend="fdl-document">Document</link>
      specifies that a particular numbered version of this License
      <quote>or any later version</quote> applies to it, you have the
      option of following the terms and conditions either of that
      specified version or of any later version that has been
      published (not as a draft) by the Free Software Foundation. If
      the Document does not specify a version number of this License,
      you may choose any version ever published (not as a draft) by
      the Free Software Foundation.
    </para>
  </sect3>

  <sect3 id="fdl-using">
    <title>Addendum</title>
    <para>
      To use this License in a document you have written, include a copy of
      the License in the document and put the following copyright and
      license notices just after the title page:
    </para>
    
    <blockquote>
      <para>
	Copyright &copy; YEAR YOUR NAME.
      </para>
      <para>
	Permission is granted to copy, distribute and/or modify this
	document under the terms of the GNU Free Documentation
	License, Version 1.1 or any later version published by the
	Free Software Foundation; with the <link
	linkend="fdl-invariant">Invariant Sections</link> being LIST
	THEIR TITLES, with the <link
	linkend="fdl-cover-texts">Front-Cover Texts</link> being LIST,
	and with the <link linkend="fdl-cover-texts">Back-Cover
	Texts</link> being LIST.  A copy of the license is included in
	the section entitled <quote>GNU Free Documentation
	License</quote>.
      </para>
    </blockquote>
      
    <para>
      If you have no <link linkend="fdl-invariant">Invariant
      Sections</link>, write <quote>with no Invariant Sections</quote>
      instead of saying which ones are invariant.  If you have no
      <link linkend="fdl-cover-texts">Front-Cover Texts</link>, write
      <quote>no Front-Cover Texts</quote> instead of
      <quote>Front-Cover Texts being LIST</quote>; likewise for <link
      linkend="fdl-cover-texts">Back-Cover Texts</link>.
    </para>
    
    <para>
      If your document contains nontrivial examples of program code,
      we recommend releasing these examples in parallel under your
      choice of free software license, such as the <ulink type="http"
      url="http://www.gnu.org/copyleft/gpl.html"> GNU General Public
      License</ulink>, to permit their use in free software.
    </para>
  </sect3>
  </sect2>
</sect1>

</article>


