<!doctype linuxdoc system>

<article><!-- LyX 1.2 created this file. For more info see http://www.lyx.org/ -->
<title>Samba által hitelesített átjáró HOGYAN
</title><author>Ricardo Alexandre Mattar 
</author><date>v1.2, 2004.05.21
</date><abstract>Ez a dokumentum bemutatja, miképpen készíthetsz tűzfalat/átjárót
 felhasználóhoz kötött szabályok alapján, ahol a felhasználók azonosítását egy 
 Samba Primary Domain Controller végzi
</abstract><sect>Bevezető
<p>Amint láthatod elég egyszerű a nyelvhasználatom, mert az angol nem
 az anyanyelvem. Ezt a dokumentumot angolul írom a Linux-közösség hasznára.
 Szóval, bocsássátok meg angol használatom egyszerűségét, és amennyiben beszélsz portugálul
 akkor azon a nyelven írj nekem levelet
</p><p>Ez dokumentum azt igyekszik bemutatni neked (és magamnak), hogy miként építsünk olyan
 Linux átjárót vagy tűzfalat, mely kérésre módosítja a szabályokat, amikor a felhasználók
 be- illetve kijelentkeznek saját Windows munkaállomásukról.
</p><p>Kellene írnom egy alkalmazást, de túl lusta vagyok. Remélem,
 ha az ötlet eljut másokhoz, akkor valakik majd készítenek pár intelligensen beépített csomagot.
 Addig pedig...
</p><p>A dokumentumban megpróbálom megmutatni, hogy miképpen építsünk átjárót
 NAT-hoz vagy álcázott (MASQUERADE) Windows munkaállomásokhoz. Használd a képzelőerőd
 a módosításokhoz, a különböző hálózatkezelési szintek megvalósításához. Használhatod szolgáltatásokhoz, szerverekhez vagy alhálózatokhoz történő hozzáférés engedélyezésére vagy tiltására.
</p><p>Képzeld el, hogy építened kell egy átjárót a Windows
 munkaállomásaid internet-hozzáférésének biztosítására, és előtte neked kell hitelesíteni
 minden felhasználót. Az első megoldás ami eszedbe jut az a Squid. Ez csakugyan
 nagyszerű megoldás, amennyiben a felhasználóidnak elég a http és az ftp hozzáférés.
 Amikor szóba kerül, hogyan férhetnek hozzá egyéb szolgáltatásokhoz is, mint pop, smtp,
 adatbázis szerver vagy bármi más, azonnal a NAT és MASQUERADE jut eszedbe.
 De mi történik a felhasználói hitelesítéssel?
</p><p>Nos, ez az én megoldásom, mely lehetőséget ad a felhasználó hitelesítésére és
 finombeállítására amikor a külső hálózathoz kapcsolódik.
</p><sect1>Áttekintés
<p>Mint tudjuk a SAMBA képes Domain vezérlőként működni, és így hitelesíteni a
 felhasználókat a Windowsokról. Mint PDC a SAMBA képes végrehajtani a Windows munkaállomások
 bejelentkezési szkriptjeit. Fel tudjuk használni ezeket a hálózati bejelentkező-szkripteket annak kényszerítésére, hogy Windows munkaállomásainkat hozzákapcsolódjanak a
 Linux PDC megadott megosztásához. Ez a kényszerített megosztás fogja tartalmazni azokat
 az előtte- és utólag futtatandó szkripteket, amelyek a felhasználó ki- vagy bejelentkezésekor
 hajtódnak végre. Az smbstatus (ez a SAMBA része - a ford.) program kilistázza a használatban
 lévő megosztásokat, kiírja a felhasználó nevét és a munkaállomás IP címét is. Csak
 meg kell szűrnünk az smbstatus kimenetét és aktualizálni a tűzfal szabályokat.
</p><sect1>A felelősség teljes kizárása
<p>A dokumentum tartalma minden kötelezettség nélkül felhasználható. Használd az elvet,
 példát és egyéb tartalmát saját felelősségedre. Mivel ez a legújabb változat, lehetnek
 benne hibák, tévedések, amelyek károsíthatják a rendszeredet. Használd nagy figyelemmel
 és bár nagyon szomorú, de a szerző(k) semmilyen felelősséget nem vállalnak érte.
</p><p>Minden szerzői jogot a megfelelő tulajdonos birtokol, hacsak másként nincs
jelezve. Ebben a dokumentumban használt szakkifejezéseknek az érvényességi
vonatkozása nem kell tekintettel legyenek semmilyen védjegynek vagy szerviz
márkának.
</p><p>Az egyéni termékekre vagy márkákra történő hivatkozás nem szabálysértés. 
</p><sect1>A dokumentum új változatai
<p>A legújabb változat megtalálható a <url url="http://ram.eti.br" name="http://ram.eti.br"> vagy a <url url="http://www.tldp.org" name="http://www.tldp.org"> webhelyen.
</p><p>A kapcsolódó HOGYANok megtalálhatók a Linux Documentation Project
 webhelyén; <url url="http://tldp.org" name="http://tldp.org">. (Illetve a <url url="http://tldp.fsf.hu/" name="Magyar LDP"> webhelyén - a lektor.)
</p><sect1>Fordítás
<p>Portugál verzió hozzáférhető.
</p><p>A francia változat Guillaume Lelarge fordításában megtalálható a <url url="http://www.traduc.org/docs/HOWTO/lecture/Samba-Authenticated-Gateway-HOWTO.html" name="http://www.traduc.org"> honlapon.
</p><p>A magyar változat megtalálható a <url url="http://tldp.fsf.hu/HOWTO/Samba-Authenticated-Gateway-HOWTO-hu/Samba-Authenticated-Gateway-HOWTO-hu.html" name="http://tldp.fsf.hu"> honlapon.
</p><p>Ha segíteni szeretnél egy fordítással, akkor kérlek tedd.
</p><sect1>Visszajelzés
<p>Mindenféle közreműködést illetve bírálatot szívesen fogadok.
</p><p>Az angol nyelvezet javításával kapcsolatos észrevételeket is szívesen veszem!
</p><p>Ha bármilyen hibát fedezel fel a dokumentumban található szkriptekben, kérlek értesíts.
</p><p>Megtalálsz a ricardo@ram.eti.br vagy ricardo.mattar@bol.com.br e-mail címen.
</p><sect1>Szerzői jog és licenc
<p>Copyright (c) 2002-2003 Ricardo Alexandre Mattar
</p><p>A dokumentum másolása, terjesztése és/vagy módosítása engedélyezett a
Free Software Foundation (Szabad Szoftver Alapítvány) által közzétett
GNU Free Documentation License 1.2 vagy későbbi változatában leírt
feltételek szerint; állandó fejezetek, előoldali és hátoldali szövegek
nélkül. A licenc egy másolata megtalálható a &quot;GNU Free Documentation License&quot; fejezetben.
</p><sect1>Visszajelzések és köszönetnyilvánítások
<p>Köszönet Carlos Alberto Reis Ribeironak, hogy megmutatta nekem a Linuxot.
</p><p>Köszönet Cesar Bremer Pinheironak, hogy motivált ezen dokumentum megírására.
</p><p>Köszönet Guillaume Lelargenak az átdolgozásnál nyújtott (folyamatos) segítségért.
</p><p>Köszönet Erik Esplundnak a további nyelvi korrekciókért.
</p><p>Köszönet Albert Teixidsnek a kód tökéletesítéséért.
</p><p>Köszönet Felipe Cordeiro Caetanonak, amiért segített a teszthelyem elkészítésében.
</p><p>Köszönet a <url url="http://www.raseac.com.br" name="RASEAC"> kommunikációs biztonsággal foglalkozó cégnek, amiért támogatja munkámat.
</p><sect1>Magyar fordítás
<p>A magyar fordítást <url url="mailto:kormos@mail.datatrans.hu_NO_SPAM" name="Kormos György"> készítette (2003.12.16).
A lektorálást <url url="mailto:dacas@freemail.hu_NO_SPAM" name="Daczi László"> végezte el (2003.12.23).
Utoljára frissítve 2004.05.24.-én.
A dokumentum legfrissebb változata megtalálható a <url url="http://tldp.fsf.hu/index.html" name="Magyar Linux Dokumentációs Projekt"> honlapján.
</p><sect>Követelmények
<sect1>Ismeretek
<p>Ez a dokumentum a tapasztalt rendszer-adminisztrátorokat célozza meg.
</p><p>Elég jó tudásod kell legyen (nem utolsó sorban tudd, hogy mik ezek):
</p><p><itemize><item>TCP/IP; 
<item>Linux netfilter; 
<item>Egy szkript-nyelv (bash?); 
<item>SAMBA és Windows hálózatok, Domain vezérlők; 
</itemize></p><p>Szerencsére bőséges dokumentáció található ezekből az Interneten.
</p><sect1>Szoftver
<p>Legalább ezek legyenek telepítve a szerveren:
</p><p><itemize><item>Samba;
<item>Iptables;
<item>Egy szkript-nyelv;
</itemize></p><sect>Linuxos gép beállítása
<p>Ez a HOGYAN feltételezi, hogy van egy RENDSZERMAGOD a 2.4-es szériából ami
használja az IPTable szolgáltatást. Azonkívül nincsenek ismert fejlemények miért ne működjön ez egy 2.2 rendszermagon azokkal a scriptekkel, amik az
IPChains-hez lettek használva.
</p><p>Természetesen telepítened kell az iptables userland eszközt, egy
 apache http szervert, ha CGI eszközt szeretnél futtatni a jelszócseréhez és
 SAMBA-hoz. Szükséged lesz egy olyan rendszermagra, amelyhez az iptables modul le lett fordítva.
</p><p>Kívánság szerint használhatsz DHCP-t. Ez esetben könnyű a beállítása. Ne
 felejtsd el a dhcp szerveren beállítani, hogy szolgáltassa a névszerver
 IP címét és az átjáróét is. A windowsos gépek nagyon jól használják ezeket
 az információkat.
</p><sect1>Alapvető rendszerbeállítás
<p>Általánosan elmondható, hogy a legtöbb alapbeállítás a különböző
 Linux-terjesztésekben megegyezik, és illeszkednek ehhez az átjáró példához. Csak
 ellenőrizd le, ha van Sambád és IPTABLES-ed.
</p><sect1>Kiegészítő tartalomjegyzék hierarchia
<p>A kiegészítő tartalomjegyzék-hierarchia szükséges lesz az ebben a HOGYANban található példa megvalósításához.
</p><p>Ezek használatosak a felhasználók és az IP címek nyomon követésére:
</p><p><verb>/var/run/smbgate/
</verb></p><p>A felhasználófüggő szkriptek könyvtára:
</p><p><verb>/etc/smbgate/users/
</verb></p><p>A csoportfüggő szkriptek könyvtára:
</p><p><verb>/etc/smbgate/groups/
</verb></p><p>Megosztott könyvtár a bejelentkezéshez:
</p><p><verb>/home/samba/netlogon/
</verb></p><p>A nyomkövetés megosztása:
</p><p><verb>/home/samba/samba/
</verb></p><p>Ez a könyvtárrendszer szükséges, hogy a példában szereplő
 szkriptek és démonok működjenek.
</p><sect1>Tűzfal beállítás
<p>Nagyon valószínűtlen, hogy az általad használt Linux-terjesztésbe ne lenne belefordítva
 az iptables, vagy éppen nem lennének telepítve a felhasználói eszközök. Mindenesetre,
 ha ezek nincsenek, akkor a programok és dokumentációk beszerzéséhez utalásokat találsz a <url url="http://www.netfilter.org" name="http://www.netfilter.org">
 vagy <url url="http://www.iptables.org" name="http://www.iptables.org"> webhelyen.
</p><p>Szükséged lesz az alapvető tűzfal beállításokra az átjáród működéséhez.
 Nézd meg az iptables kézikönyvében: <url url="http://www.netfilter.org/documentation/tutorials/blueflux/iptables-tutorial.html" name="IPTABLES TUTORIAL">. Nagyon érdekes olvasmány.
 Egyébként, ha nincs időd az olvasásra, a következő
 kód elégé általános ahhoz, hogy megfeleljen a szükségleteidhez.
</p><p><verb>&num;!/bin/sh
IPTABLES=/usr/sbin/iptables
/sbin/depmod -a
/sbin/insmod ip_tables
/sbin/insmod ip_conntrack
/sbin/insmod ip_conntrack_ftp
/sbin/insmod ip_conntrack_irc
/sbin/insmod iptable_nat
/sbin/insmod ip_nat_ftp
echo &quot;1&quot; &gt; /proc/sys/net/ipv4/ip_forward
echo &quot;1&quot; &gt; /proc/sys/net/ipv4/ip_dynaddr
&dollar;IPTABLES -P INPUT ACCEPT
&dollar;IPTABLES -F INPUT 
&dollar;IPTABLES -P OUTPUT ACCEPT
&dollar;IPTABLES -F OUTPUT
&dollar;IPTABLES -P FORWARD ACCEPT
&dollar;IPTABLES -F FORWARD 
&dollar;IPTABLES -t nat -F
</verb></p><p>Mint láthatod, ez a kód valójában nem csinál semmit. Eredményeképpen
 mégis betöltődnek a NAT és tűzfalhasználat moduljai, valamint bekapcsolja a csomag útvonal kijelölést.
 Elhelyezheted (el kéne helyzened) azokat a szabályokat, melyek meghatározzák az átjáród alapvető viselkedését.
 A "nagy varázslat" (big magic) a SAMBA démon által lefuttatott szkriptekkel lesz befejezett.
</p><p>Figyelj! Emlékeztetlek, hogy ez a kód a legkevésbé sem biztonságos! Ne használd
 ezeket a példákat működő rendszerekben. Ezek a példák csak oktatási céllal készültek.
 Neked kell a rendszerednek legjobban megfelelő tűzfalszabályokat beállítanod
</p><p>Figyelmeztetettelek!
</p><sect1>SAMBA beállítás
<p>Ellenőrizd, hogy a SAMBA telepítve legyen. Ha a te Linux-terjesztésed nem tartalmazza
 a SAMBA csomagot, akkor nézz körül a <url url="http://www.samba.org" name="http://www.samba.org"> webhelyen. Innen beszerezheted a
 csomagot, valamint találsz útmutatót a telepítésről is. Nézz körül ezeken a weblapokon és tanulj belőlük.
 A webhelyen sok dokumentáció található. Valószínűleg a te Linux-terjesztésed is
 bőséges SAMBA dokumentációt tartalmaz.
</p><p>A SAMBA csomagot elsődleges domain vezérlőnek (Primary Domain Controller) kell beállítanod. Itt találhatsz
 egy beállítási példát, de szükséges a <url url="http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection.html" name="Samba HOWTO Collection"> dokumentációt átolvasása, valamint tanulj meg mindent
 a PDC-ről amit csak lehet.
</p><sect2>SAMBA alapbeállítás.
<p>Mivel nem szeretném újraírni a SAMBA dokumentációt, ezért íme egy példa smb.conf fájl:
</p><p><verb>&num; Általános paraméterek
&lsqb;global&rsqb;
workgroup = DOMAIN
netbios name = LINUX
server string = Linux PDC
encrypt passwords = Yes
map to guest = Bad Password
passwd program = /usr/bin/passwd
unix password sync = Yes
max log size = 50
time server = Yes
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
add user script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M &percnt;u
logon script = netlogon.bat
domain logons = Yes
os level = 64
lm announce = True
preferred master = True
domain master = True
dns proxy = No
printing = lprng
&lsqb;homes&rsqb;
comment = Home Directories
path = /home/&percnt;u
read only = No
&lsqb;printers&rsqb;
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
available = No
&lsqb;netlogon&rsqb;
comment = NetLogon ShARE
path = /home/samba/netlogon
guest account = 
&lsqb;samba&rsqb;
comment = login tracking share
path = /home/samba/samba
browseable = No
root preexec = /usr/local/bin/netlogon.sh &percnt;u &percnt;I
root postexec = /usr/local/bin/netlogoff.sh &percnt;u
</verb></p><p>Ezeket kell beállítanod, vagy el kell olvasnod
 a SAMBA dokumentációt, ha valóban felügyelni szeretnéd a szervered és a hálózatod.
</p><sect2>A hálózati bejelentkezés (netlogon) és a követés megosztásai (tracking shares)
<p>A netlogon megosztásból töltik le a Windows munkaállomások a bejelentkeztető parancsfájlokat. Azért van szükségünk erre a megosztásra, hogy
 elhelyezzük itt a bejelentkeztető szkriptet. Ez jelzi a munkaállomásoknak,
 hogyan csatlakoztassanak egy megosztást, ahol a felhasználók IP címei lesznek követhetők.
</p><p>Amint láthatod, szükséged lesz a smb.conf fájlban a következő bejegyzésre is.
</p><p><verb>logon script = netlogon.bat
</verb></p><p>Ez a sor jelzi a Windows kliensednek, hogy töltse le és futtassa a
 netlogon.bat szkriptet. Ennek a szkriptnek a netlogon megosztáson kell lennie.
 Szóval szintén szükséged lesz egy netlogon.bat szkriptre a Windows munkállomásokhoz.
 Használhatod a következő példát, elhelyezve a netlogon megosztáson, ami ebben az esetben
 a: /home/samba/netlogon/NETLOGON.BAT.
</p><p><verb>REM NETLOGON.BAT
net use z: &bsol;&bsol;linux&bsol;samba /yes
</verb></p><p>Ez a szkript fogja jelezni a Windows munkaállomásoknak,
 hogy csatlakoztassák a megadott megosztásokat. Az smbstatus program
 kimenetei alapján pedig képesek leszünk nyomon követni a felhasználót és a munkaállomást.
</p><p>Egészen egyszerű! Azonban nem elég...
</p><p>Amint láthatod, szükséged van még egy megosztásra (tracking share), amit - ebben
 a példában - samba-nak neveztem. Láthatod a követés megosztás (tracking share) beállításait
 az smb.conf fájlban:
</p><p><verb>&lsqb;samba&rsqb;
comment = login tracking share
path = /home/samba/samba
browseable = No
root preexec = /usr/local/bin/netlogon.sh &percnt;u &percnt;I
root postexec = /usr/local/bin/netlogoff.sh &percnt;u
</verb></p><p>Amint azt bizonyára már kitaláltad vagy elolvastad a SAMBA
 dokumentációban, a root preexec és a root postexec sorok jelzik a
 SAMBA-nak, hogy futtasson egy javasolt szkriptet, amikor a felhasználó
 fel- vagy lecsatol egy megosztást. Figyelj arra, hogy a &percnt;u
 a sorok végén van. Ezek a szkriptek a "szörnyek" (beasts), melyek
 meghívnak egy szkriptet, programot, hogy módosítsák az átjárónk csomagszűrő szabályait.
</p><p>Figyelj, hogy a netlogon.sh szkriptnek ellenőriznie kell, hogy a hivatkozott
 munkaállomás már csatlakoztatva van-e a nyomkövetés megosztásához.
</p><p>Vess egy pillantást a netlogon.sh és a netlogoff.sh szkriptekre:
</p><p><verb>&num;!/bin/sh
&num;
&num; netlogon.sh
&num;
&num; usage:
&num; netlogon.sh &lt;username&gt;
&num;
if &lsqb; -f /var/run/smbgate/&dollar;1 &rsqb; ; then
    exit 0
fi
echo &dollar;2 &gt; /var/run/smbgate/&dollar;1
IPTABLES='/usr/sbin/iptables'
EXTIF='eth0'
COMMAND='-A'
ADDRESS=`cat /var/run/smbgate/&dollar;1`
GROUP=`groups &dollar;1 | gawk '// &lcub; print &dollar;3 &rcub;'`
if &lsqb; -f /etc/smbgate/users/&dollar;1 &rsqb; ; then
    /etc/smbgate/users/&dollar;1 &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
else
    if &lsqb; -f /etc/smbgate/groups/&dollar;GROUP &rsqb; ; then
        /etc/smbgate/groups/&dollar;GROUP &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
    else
        /etc/smbgate/users/default.sh &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
    fi
fi

</verb></p><p>A netlogon.sh szkript a felhasználó belépésekor hajtódik végre. A végrehajtandó szkript a felhasználói név és a felhasználó csoportja alapján kerül kiválasztásra. A felhasználó 
 IP címe bekerül a /var/run/smbgate könyvtárba nyomkövetési célból. A fájl tartalmazza
 a felhasználó nevét, mely később a kijelentkezéskor szükséges. Az IP cím a
 felhasználói névvel együtt paraméterként kerül átadásra, amely végül frissíti a tűzfalat.
</p><p> Figyelj arra, hogy a netlogon.sh futtatni próbálja a felhasználó szkriptjét.
 Ha nem találja, akkor próbálkozik a csoport szkripttel. Végül, ha nem találja a
 csoport szkriptet sem, akkor a default.sh szkriptet futtatja. Ezt a logikát és
 viselkedést módosíthatod ha szeretnéd vagy szükséges, de ne felejtsd el
 módosítani a többit is ennek megfelelően. 
</p><p>Valószínű, ha a felhasználó több csoportba tartozik,
 akkor ezek a szkriptek hibásan fognak működni. Nem volt időm jobb kódot írni.
</p><p><verb>&num;!/bin/sh
&num;
&num; netlogoff.sh
&num;
&num; usage:
&num; netlogoff.sh &lt;username&gt;
&num;
IPTABLES='/usr/sbin/iptables'
EXTIF='ppp0'
COMMAND='-D'
ADDRESS=`cat /var/run/smbgate/&dollar;1`
GROUP=`groups &dollar;1 | gawk '// &lcub; print &dollar;3 &rcub;'`
if &lsqb; -f /etc/smbgate/users/&dollar;1 &rsqb; ; then
    /etc/smbgate/users/&dollar;1 &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
else
    if &lsqb; -f /etc/smbgate/groups/&dollar;GROUP &rsqb; ; then
        /etc/smbgate/groups/&dollar;GROUP &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
    else
        /etc/smbgate/users/default.sh &dollar;COMMAND &dollar;ADDRESS &dollar;EXTIF
    fi
fi
rm -f /var/run/smbgate/&dollar;1
</verb></p><p>A netlogoff.sh szkript a
 felhasználó kilépésekor fut le. A /var/run/smbgate/user fájlból beolvasott cím, mint
 argumentum átadódik az /etc/smbgate/users/user szkriptnek, amely frissíti a tűzfalat és
 visszaállítja a felhasználó bejelentkezése előtti állapotot.
</p><p>Néhány Windows verzió, mint a Windows 2000 többször felcsatolja a nyomkövető
 megosztást. Ez problémát okozhat azáltal, hogy többször hajtja végre a netlogon.sh 
 és a netlogoff.sh szkripeket. Ez teljes zűrzavarhoz vezet. Nos, esetleg előnyösebb egy kilépés-ellenőrzés (logout checking) futtatása cronból, mint a netlogoff.sh végrehajtatása a SAMBA-val.
 Íme egy példa:
</p><p><verb>&num;!/bin/sh
&num; checklogout.sh
&num;
&num; usage:
&num; intended to run at cron (maybe each 10 minutes)

TRACKDIR=&quot;/var/run/smbgate&quot;
DIRLENGTH=&dollar;&lcub;&num;TRACKDIR&rcub;
TRACKSHARE=&quot;samba&quot;
EXTIF='eth0'
COMMAND='-D'
if &lsqb; -d &dollar;TRACKDIR &rsqb;; then
  for n in &dollar;TRACKDIR/*; do
    &lsqb; -d &dollar;n &rsqb; &amp;&amp; continue;
    if &lsqb; -f &dollar;n &rsqb; ; then 
      IPADDRESS=`cat &dollar;n`
      USERNAME=&dollar;&lcub;n:&dollar;DIRLENGTH+1&rcub;
      NMS=`smbstatus -u &dollar;USERNAME | grep &dollar;TRACKSHARE | grep &dollar;IPADDRESS | grep -v grep | wc -l`
      if &lsqb; &dollar;NMS == 0 &rsqb; ; then
        rm -f &dollar;n
        GROUP=`groups &dollar;USERNAME | gawk '// &lcub; print &dollar;3 &rcub;'`
        if &lsqb; -f /etc/smbgate/users/&dollar;USERNAME &rsqb; ; then
          /etc/smbgate/users/&dollar;USERNAME &dollar;COMMAND &dollar;IPADDRESS &dollar;EXTIF
        else
          if &lsqb; -f /etc/smbgate/groups/&dollar;GROUP &rsqb; ; then
            /etc/smbgate/groups/&dollar;GROUP &dollar;COMMAND &dollar;IPADDRESS &dollar;EXTIF
          else
            /etc/smbgate/users/default.sh &dollar;COMMAND &dollar;IPADDRESS &dollar;EXTIF
          fi
        fi
      fi
    else
      exit 0
    fi
  done
fi 
</verb></p><p>Ebben az esetben el kell távolítanod a postexec bejegyzést
 az smb.conf nyomkövetö megosztásából:
</p><p><verb>root postexec = /usr/local/bin/netlogoff.sh &percnt;u
</verb></p><p>Íme egy általános /etc/smbgate/users/user szkript.
 Jelenleg ez az egyetlen, ami módosítja a tűzfal szabályait.
</p><p><verb>&num;!/bin/sh
&num;
COMMAND=&dollar;1
ADDRESS=&dollar;2
EXTIF=&dollar;3
IPTABLES='/usr/sbin/iptables'
&dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF -j MASQUERADE
</verb></p><p>Az /etc/smbgate/users/ könyvtárba szintén kell egy default.sh szkript,
 hogy megadjuk az átjáró viselkedésének alapszabályait.
</p><p><verb>&num;!/bin/sh
&num;
&num; default.sh
COMMAND=&dollar;1
ADDRESS=&dollar;2
EXTIF=&dollar;3
IPTABLES='/usr/sbin/iptables'
&num;&dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF -j MASQUERADE
exit 0
</verb></p><sect>
SSH beállítás
<p>
Talán azt szeretnéd, hogy a PDC (Primary Domain Controller; elsődleges tartományvezérlő) 
egy gépen fusson, egy másikon pedig egy átjáró (gateway), bármilyen okból. Ha így van, 
akkor az átjárót úgy kell beállítanod, hogy jelszó nélkül elfogadja a PDC-ről érkezett, 
rsa kulccsal hitelesített bejelentkezéseket (login).
</p>
<p>
Nézd át a <url url="http://www.openssh.org/manual.html" name="www.openssh.org"> 
webhelyen lévő dokumentációt az ssh szerver és kliens helyes beállításához.

</p>
<sect1>
Fontos
<p>
Az ssh dokumentációt el kell olvasnod. Bizonyosodj meg arról, hogy teljesen tisztában vagy
az rsa, illetve más titkosított azonosítással kapcsolatos teendőkkel
</p>
<p>
Ha a biztonság nem fontos, akkor csak használd a példámat és lépj tovább.

</p>
<sect1>
Kulcspár generálás
<p>
Kulcspár létrehozásához a PDC-n a következő parancsot használd:
</p>

<p>
<verb>
pdc:&tilde;&num; ssh-keygen -t rsa

</verb>
</p><p>
Válaszolj a kérdésekre, majd a létrejött nyilvános kulcsot másold az átjáróra. A nyilvános
kulcs általában a "&tilde;.ssh/id_rsa.pub" könyvtárba kerül.
</p>

<p>
<verb>
pdc:&tilde;&num; cd .ssh
pdc:&tilde;&num; scp id_rsa.pub root@gateway:/root/.ssh/authorized_keys2

</verb>
</p><sect1>
SSH-t engedélyező bejelentkező szkript
<p>
Következzen egy módosított /etc/smbgate/users/user szkript, amely az ssh titkosított
bejelentkezést használja.
</p>

<p>
<verb>
&num;!/bin/sh
&num;
COMMAND=&dollar;1
ADDRESS=&dollar;2
EXTIF=&dollar;3
IPTABLES='/sbin/iptables'
ssh root@gateway &dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF -j MASQUERADE

</verb>
</p><p>
Figyeld meg, hogy a bináris iptables az ssh-n keresztül kerül meghívásra a "gateway"-en.
Megismétlem, olvasd el az ssh szerver dokumentációját.
</p><sect>A windowsos munkaállomások beállítása
<sect1>Bevezető
<p>Be fogjuk állítani a hálózatot, a felhasználók kezelését és a házirendet (policy) a windowsos munkaállomásokon.
</p><p>Nem fogok ezeken a lépéseken teljesen végigmenni, megnevezni
 minden egyes párbeszédablakot. Feltételezem, hogy amennyiben el tudod
 olvasni és megérted ezt a dokumentumot, akkor megtalálod az utat az
 egyes lépések között.
</p><sect1>Hálózati protokollok
<p>Először is, hacsak valóban nincs szükséged rá, akkor távolíts el
 minden protokollt, kivéve a TCP/IP-t. A windowsos gépek még a saját protokolljuk hiányában is szeretnek sokat üzengetni, és ez nem mindenkinek tetszik. Egyébként is a TCP/IP-n kívül kinek kell bármi más?
</p><sect1>DHCP beállítás
<p>Ha szeretnél DHCP szervert a saját Linux rendszereden, ne feledd,
 hogy a Windows munkaállomások megkaphatják a névszerverek és az átjáró
 címét is a saját IP címükön felül. Szóval nem kell minden munkaállomáson
 beállítanod ezeket a jellemzőket.
</p><sect1>Belépés a Linux szerver domain-be
<p>A Windows munkaállomásokat Domain-be történő bejelentkezésre kell beállítani.
 A Linux szervernek pedig át kell adni a domain nevet. Ez alapvetően szükséges
 az átjáró működéséhez.
</p><p>Tudnod kell! Ahhoz, hogy valamennyi windowsos verziós gép be tudjon
 jelentkezni, a SAMBA domain vezérlőhöz létre kell hoznod a gépek fiókjait a
 saját Linux PDC-den. (Amelyik nem tud feljelentkezni domain-be, az természetszerűleg
 nem: Win95, WinXP Home. - a ford.) Nézd meg a SAMBA leírást, hogy miképpen kell
 beállítani a PDC-t az általad használt Windowsokhoz.
</p><sect2>Windows 95/98
<p>Ezek a verziók úgy tűnik, hogy speciális beállítást igényelnek a Linux PDC domain-be történő belépéshez.
</p><sect2>Windows NT és 2000
<p>Ezen verziók esetében szükséges, hogy legyen a gépnek fiókja a Linux
 rendszerben. Újfent, nézd meg a SAMBA leírását.
</p><sect2>Windows XP
<p>Ezen a verzió esetén szükséges, hogy legyen a gépnek fiókja a Linux rendszeren, 
 és egy kis módosításra is szükség van a registry-ben.
</p><p>Keresd meg a "HKEY_LOCAL_MACHINE&bsol;SYSTEM&bsol;CurrentControlSet&bsol;Services&bsol;Netlogon&bsol;Parameters&bsol;RequireSignOrSeal".
 kulcsot. Az alapérték: 1, változtasd meg 0-ra. Többet nem fog panaszkodni a
 domain-be történő belépéskor.
</p><p>Ha sok munkaállomásod van, melyeket be kell állítanod, akkor
 készíts egy fájlt. Legyen a neve anything.reg, amely a következőket tartalmazza.
 Használd ezt, a "hibás" regisztrációs bejegyzések módosításához.
</p><p><verb>Windows Registry Editor Version 5.00

&lsqb;HKEY_LOCAL_MACHINE&bsol;SYSTEM&bsol;CurrentControlSet&bsol;Services&bsol;Netlogon&bsol;Parameters&rsqb;
&quot;requiresignorseal&quot;=dword:00000000
</verb></p><p>Ezen verzió esetén szintén szükséges egy kis módosítás a
 NETLOGON.BAT szkripten. Némely esetben makacsul és folyamatosan felcsatolásokat végez.
</p><p><verb>REM NETLOGON.BAT
net use z: &bsol;&bsol;linux&bsol;samba /yes /persistent:no
</verb></p><sect1>Házirend szerkesztő
<p>Ez egy kis segédprogram, amit a Windows CD-n megtalálsz. A fájl neve
 poledit.exe. Ez egy olyan eszköz - mint a neve is sugallja -, mellyel
 felhasználói és rendszer házirend-fájlokat lehet készíteni
</p><p>Sajnálatos módon ez az eszköz nem képes sima szöveges fájlt készíteni,
 így nem tudok itt példát bemutatni.
</p><p>Használd a házirend szerkesztőt munkaállomások és 
felhasználók házirendjeinek elkészítéséhez. Le kell tiltanod a helyi és domain
 jelszó gyorsítótárat, a biztonság növelése érdekében. Tárold el
 config.pol néven a házirend-fájlt, és helyezd el a netlogon megosztáson.
 Ekkor a Windows munkaállomásaid letöltik és használni fogják a config.pol
 fájlt a saját házirendjük beállításához. Természetesen ennek a szálnak a
 windowsos gépeken kell futnia.
</p><p>Ha nem használsz config.pol fájlt, a windowsos munkaállomások bosszantani fognak a Windows jelszó bekérésével, és megőrjítenek, amikor megpróbálod összhangba hozni és kezelni a domain-odat és Windows jelszavakat. Úgy néz ki, hogy az operációs rendszer nem tudja, hogy belépett egy domain-be. Ezt tudatnod kell vele, majd bele kell vágnod az arcába, így hinni fog neked.
</p><sect>Felhasználók kezelése
<sect1>Felhasználó hozzáadása
<p>Linux-felhasználó hozzáadás és a samba
 jelszó beállítása az smbpasswd segítségével működik. Ha bármilyen
 kétséged van, akkor olvasd el a SAMBA dokumentációt. Nem nehéz
 megcsinálni.
</p><sect1>Jelszavak kezelése
<p>Úgy gondolom ez egy fontos téma, mert én sem tanultam még
 meg, hogy miképpen kezeljük a felhasználót és a jelszavát a Windows
 munkaállomásokról a web-es felület használata nélkül. Nem találtam
 és nem tudom, hogy miképpen hozzak létre egy beépített eszközt ezen
 probléma megoldására. Nos, ezért én egy CGI programot használok ennek
 megvalósítására.
</p><p>Próbáld ki a <url url="http://changepassword.sourceforge.net" name="http://changepassword.sourceforge.net"> webhelyről letölthető csomagot. Ez jó megoldásnak tűnik.
</p><sect1>Felhasználói hozzáférés engedélyezése, tiltása
<p>Amint azt az előző fejezetekben láthattad a SAMBA démon meg fogja
 hívni a netlogon.sh szkriptet minden alkalommal, amikor a nyomkövető megosztás felcsatlakozik. Ez a netlogon.sh szkript fog
 meghívni egy másik szkriptet a felhasználó nevével és a munkaállomás
 IP címével, mint átadott paraméterrel. Ez a felhasználói szkript
 fogja beállítani a kívánt szabályokat.
</p><p>Például, ha teljes hozzáférést akarsz a felhasználónak az internethez, a következőket állítsd be:
</p><p><verb>&num;!/bin/sh
&num;
COMMAND=&dollar;1
ADDRESS=&dollar;2
EXTIF=&dollar;3
IPTABLES='/usr/sbin/iptables'
&dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF -j MASQUERADE
</verb></p><p>Ha nem akarsz semmit sem megváltoztatni bizonyos
 felhasználók esetében, akkor készíts nekik egy üres szkriptet:
</p><p><verb>&num;/bin/sh
&num;
exit 0
</verb></p><p>Esetleg ne is készíts semmilyen szkriptet a kevesebb
 joggal rendelkező felhasználóknak. Így ők a default.sh szkriptet
 kapják, mely akár üres is lehet mint az előző példa, vagy korlátozott
 jogkörű, mint lejjebb látható: 
</p><p><verb>&num;!/bin/sh
&num;
COMMAND=&dollar;1
ADDRESS=&dollar;2
EXTIF=&dollar;3
EXTIFADDRESS=&dollar;4
IPTABLES='/usr/sbin/iptables'
&dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF --dport 25 -j SNAT --to-source &dollar;EXTIFADDRESS
&dollar;IPTABLES &dollar;COMMAND POSTROUTING -t nat -s &dollar;ADDRESS -o &dollar;EXTIF --dport 110 -j SNAT --to-source &dollar;EXTIFADDRESS
</verb></p><p>Figyelj arra, hogy ezen szkript miatt módosítanod kell
 az összes előző szkriptet, hogy tartalmazza az extra paramétereket,
 vagy egyszerűen csak módosítsd ezt a szkriptet. Ne feledd azt sem, hogy nem mész
 ezzel a HOGYANnal semmire, ha nem érted az iptables működését. 
</p><sect>Csoport kezelése
<sect1>Csoport létrehozás
<p>Egyszerűen hozd létre a csoportot a Linux PDC-n, majd rendeld a felhasználókat
 az egyes csoportokhoz. Ez van.
</p><p>Ne feledd azt a példa szkriptet ebben a HOGYANban, ami
 valószínűleg hibát eredményez, ha egy felhasználó több csoportnak is
 a tagja. Ha szeretnéd (egy felhasználó több csoportba tartozhasson -
 a ford.), akkor ne felejtsd el a szkriptet megváltoztatni.
</p><sect1>Csoport házirend
<p>Csoportfüggő szkripteket kell létrehoznod és elhelyezni őket az
 "/etc/smbgate/groups/" könyvtárban. Figyelj arra, hogy a fájl nevének a csoport
 nevét add, ha ennek a HOGYANnak a példáját akarod követni.
</p><p>Ezen HOGYAN felfogása szerint először ellenőrizd a
 felhasználói szkriptet, majd a csoport és végül az alapértelmezett
 szkriptet. Ha ezen alapviselkedésen módosítani szeretnél, akkor ne felejtsd
 el ehhez igazítani a netlogon.sh, netlogoff.sh (vagy checklogout.sh)
 szkripteket. Az egész logikája ezekben a szkriptekben van.
</p><sect>Irodalomjegyzék
<p>Oskar Andreasson: <url url="http://www.netfilter.org/documentation/tutorials/blueflux/iptables-tutorial.html" name="IPTABLES TUTORIAL">
</p><p>The SAMBA Team: <url url="http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection.html" name="Samba HOWTO Collection">
</p><sect>GNU Free Documentation License
<p>GNU Free Documentation License Version 1.2, November 2002
</p><p>Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. 59
 Temple Place, Suite 330, Boston, MA 02111-1307 USA Mindenki számára
 engedélyezett a dokumentum másolása részben vagy egészben, de annak
 tartalmának megváltoztatása nem megengedett.
</p><p>0. Bevezetés
</p><p>The purpose of this License is to make a manual, textbook, or
 other functional and useful document &quot;free&quot; in the sense
 of freedom: to assure everyone the effective freedom to copy and
 redistribute it, with or without modifying it, either commercially
 or noncommercially. Secondarily, this License preserves for the author
 and publisher a way to get credit for their work, while not being
 considered responsible for modifications made by others.
</p><p>This License is a kind of &quot;copyleft&quot;, which means that
 derivative works of the document must themselves be free in the same
 sense. It complements the GNU General Public License, which is a
 copyleft license designed for free software.
</p><p>We have designed this License in order to use it for manuals
 for free software, because free software needs free documentation:
 a free program should come with manuals providing the same freedoms
 that the software does. But this License is not limited to software
 manuals; it can be used for any textual work, regardless of subject
 matter or whether it is published as a printed book. We recommend
 this License principally for works whose purpose is instruction or
 reference.
</p><p>1. APPLICABILITY AND DEFINITIONS
</p><p>This License applies to any manual or other work, in any medium,
 that contains a notice placed by the copyright holder saying it can
 be distributed under the terms of this License. Such a notice grants
 a world-wide, royalty-free license, unlimited in duration, to use
 that work under the conditions stated herein. The &quot;Document&quot;,
 below, refers to any such manual or work. Any member of the public
 is a licensee, and is addressed as &quot;you&quot;. You accept the
 license if you copy, modify or distribute the work in a way requiring
 permission under copyright law.
</p><p>A &quot;Modified Version&quot; of the Document means any work
 containing the Document or a portion of it, either copied verbatim,
 or with modifications and/or translated into another language.
</p><p>A &quot;Secondary Section&quot; is a named appendix or a front-matter
 section of the Document that deals exclusively with the relationship
 of the publishers or authors of the Document to the Document's overall
 subject (or to related matters) and contains nothing that could fall
 directly within that overall subject. (Thus, if the Document is in
 part a textbook of mathematics, a Secondary Section may not explain
 any mathematics.) The relationship could be a matter of historical
 connection with the subject or with related matters, or of legal,
 commercial, philosophical, ethical or political position regarding
 them.
</p><p>The &quot;Invariant Sections&quot; are certain Secondary Sections
 whose titles are designated, as being those of Invariant Sections,
 in the notice that says that the Document is released under this
 License. If a section does not fit the above definition of Secondary
 then it is not allowed to be designated as Invariant. The Document
 may contain zero Invariant Sections. If the Document does not identify
 any Invariant Sections then there are none.
</p><p>The &quot;Cover Texts&quot; are certain short passages of text
 that are listed, as Front-Cover Texts or Back-Cover Texts, in the
 notice that says that the Document is released under this License.
 A Front-Cover Text may be at most 5 words, and a Back-Cover Text
 may be at most 25 words.
</p><p>A &quot;Transparent&quot; copy of the Document means a machine-readable
 copy, represented in a format whose specification is available to
 the general public, that is suitable for revising the document straightforwardly
 with generic text editors or (for images composed of pixels) generic
 paint programs or (for drawings) some widely available drawing editor,
 and that is suitable for input to text formatters or for automatic
 translation to a variety of formats suitable for input to text formatters.
 A copy made in an otherwise Transparent file format whose markup,
 or absence of markup, has been arranged to thwart or discourage subsequent
 modification by readers is not Transparent. An image format is not
 Transparent if used for any substantial amount of text. A copy that
 is not &quot;Transparent&quot; is called &quot;Opaque&quot;.
</p><p>Examples of suitable formats for Transparent copies include plain
 ASCII without markup, Texinfo input format, LaTeX input format, SGML
 or XML using a publicly available DTD, and standard-conforming simple
 HTML, PostScript or PDF designed for human modification. Examples
 of transparent image formats include PNG, XCF and JPG. Opaque formats
 include proprietary formats that can be read and edited only by proprietary
 word processors, SGML or XML for which the DTD and/or processing
 tools are not generally available, and the machine-generated HTML,
 PostScript or PDF produced by some word processors for output purposes
 only.
</p><p>The &quot;Title Page&quot; means, for a printed book, the title
 page itself, plus such following pages as are needed to hold, legibly,
 the material this License requires to appear in the title page. For
 works in formats which do not have any title page as such, &quot;Title
 Page&quot; means the text near the most prominent appearance of the
 work's title, preceding the beginning of the body of the text.
</p><p>A section &quot;Entitled XYZ&quot; means a named subunit of the
 Document whose title either is precisely XYZ or contains XYZ in parentheses
 following text that translates XYZ in another language. (Here XYZ
 stands for a specific section name mentioned below, such as &quot;Acknowledgements&quot;,
 &quot;Dedications&quot;, &quot;Endorsements&quot;, or &quot;History&quot;.)
 To &quot;Preserve the Title&quot; of such a section when you modify
 the Document means that it remains a section &quot;Entitled XYZ&quot;
 according to this definition.
</p><p>The Document may include Warranty Disclaimers next to the notice
 which states that this License applies to the Document. These Warranty
 Disclaimers are considered to be included by reference in this License,
 but only as regards disclaiming warranties: any other implication
 that these Warranty Disclaimers may have is void and has no effect
 on the meaning of this License.
</p><p>2. VERBATIM COPYING
</p><p>You may copy and distribute the Document in any medium, either
 commercially or noncommercially, provided that this License, the
 copyright notices, and the license notice saying this License applies
 to the Document are reproduced in all copies, and that you add no
 other conditions whatsoever to those of this License. You may not
 use technical measures to obstruct or control the reading or further
 copying of the copies you make or distribute. However, you may accept
 compensation in exchange for copies. If you distribute a large enough
 number of copies you must also follow the conditions in section 3.
</p><p>You may also lend copies, under the same conditions stated above,
 and you may publicly display copies.
</p><p>3. COPYING IN QUANTITY
</p><p>If you publish printed copies (or copies in media that commonly
 have printed covers) of the Document, numbering more than 100, and
 the Document's license notice requires Cover Texts, you must enclose
 the copies in covers that carry, clearly and legibly, all these Cover
 Texts: Front-Cover Texts on the front cover, and Back-Cover Texts
 on the back cover. Both covers must also clearly and legibly identify
 you as the publisher of these copies. The front cover must present
 the full title with all words of the title equally prominent and
 visible. You may add other material on the covers in addition. Copying
 with changes limited to the covers, as long as they preserve the
 title of the Document and satisfy these conditions, can be treated
 as verbatim copying in other respects.
</p><p>If the required texts for either cover are too voluminous to
 fit legibly, you should put the first ones listed (as many as fit
 reasonably) on the actual cover, and continue the rest onto adjacent
 pages.
</p><p>If you publish or distribute Opaque copies of the Document numbering
 more than 100, you must either include a machine-readable Transparent
 copy along with each Opaque copy, or state in or with each Opaque
 copy a computer-network location from which the general network-using
 public has access to download using public-standard network protocols
 a complete Transparent copy of the Document, free of added material.
 If you use the latter option, you must take reasonably prudent steps,
 when you begin distribution of Opaque copies in quantity, to ensure
 that this Transparent copy will remain thus accessible at the stated
 location until at least one year after the last time you distribute
 an Opaque copy (directly or through your agents or retailers) of
 that edition to the public.
</p><p>It is requested, but not required, that you contact the authors
 of the Document well before redistributing any large number of copies,
 to give them a chance to provide you with an updated version of the
 Document.
</p><p>4. MODIFICATIONS
</p><p>You may copy and distribute a Modified Version of the Document
 under the conditions of sections 2 and 3 above, provided that you
 release the Modified Version under precisely this License, with the
 Modified Version filling the role of the Document, thus licensing
 distribution and modification of the Modified Version to whoever
 possesses a copy of it. In addition, you must do these things in
 the Modified Version:
</p><p>A. Use in the Title Page (and on the covers, if any) a title
 distinct from that of the Document, and from those of previous versions
 (which should, if there were any, be listed in the History section
 of the Document). You may use the same title as a previous version
 if the original publisher of that version gives permission. B. List
 on the Title Page, as authors, one or more persons or entities responsible
 for authorship of the modifications in the Modified Version, together
 with at least five of the principal authors of the Document (all
 of its principal authors, if it has fewer than five), unless they
 release you from this requirement. C. State on the Title page the
 name of the publisher of the Modified Version, as the publisher.
 D. Preserve all the copyright notices of the Document. E. Add an
 appropriate copyright notice for your modifications adjacent to the
 other copyright notices. F. Include, immediately after the copyright
 notices, a license notice giving the public permission to use the
 Modified Version under the terms of this License, in the form shown
 in the Addendum below. G. Preserve in that license notice the full
 lists of Invariant Sections and required Cover Texts given in the
 Document's license notice. H. Include an unaltered copy of this License.
 I. Preserve the section Entitled &quot;History&quot;, Preserve its
 Title, and add to it an item stating at least the title, year, new
 authors, and publisher of the Modified Version as given on the Title
 Page. If there is no section Entitled &quot;History&quot; in the
 Document, create one stating the title, year, authors, and publisher
 of the Document as given on its Title Page, then add an item describing
 the Modified Version as stated in the previous sentence. J. Preserve
 the network location, if any, given in the Document for public access
 to a Transparent copy of the Document, and likewise the network locations
 given in the Document for previous versions it was based on. These
 may be placed in the &quot;History&quot; section. You may omit a
 network location for a work that was published at least four years
 before the Document itself, or if the original publisher of the version
 it refers to gives permission. K. For any section Entitled &quot;Acknowledgements&quot;
 or &quot;Dedications&quot;, Preserve the Title of the section, and
 preserve in the section all the substance and tone of each of the
 contributor acknowledgements and/or dedications given therein. L.
 Preserve all the Invariant Sections of the Document, unaltered in
 their text and in their titles. Section numbers or the equivalent
 are not considered part of the section titles. M. Delete any section
 Entitled &quot;Endorsements&quot;. Such a section may not be included
 in the Modified Version. N. Do not retitle any existing section to
 be Entitled &quot;Endorsements&quot; or to conflict in title with
 any Invariant Section. O. Preserve any Warranty Disclaimers.
</p><p>If the Modified Version includes new front-matter sections or
 appendices that qualify as Secondary Sections and contain no material
 copied from the Document, you may at your option designate some or
 all of these sections as invariant. To do this, add their titles
 to the list of Invariant Sections in the Modified Version's license
 notice. These titles must be distinct from any other section titles.
</p><p>You may add a section Entitled &quot;Endorsements&quot;, provided
 it contains nothing but endorsements of your Modified Version by
 various parties--for example, statements of peer review or that the
 text has been approved by an organization as the authoritative definition
 of a standard.
</p><p>You may add a passage of up to five words as a Front-Cover Text,
 and a passage of up to 25 words as a Back-Cover Text, to the end
 of the list of Cover Texts in the Modified Version. Only one passage
 of Front-Cover Text and one of Back-Cover Text may be added by (or
 through arrangements made by) any one entity. If the Document already
 includes a cover text for the same cover, previously added by you
 or by arrangement made by the same entity you are acting on behalf
 of, you may not add another; but you may replace the old one, on
 explicit permission from the previous publisher that added the old
 one.
</p><p>The author(s) and publisher(s) of the Document do not by this
 License give permission to use their names for publicity for or to
 assert or imply endorsement of any Modified Version.
</p><p>5. COMBINING DOCUMENTS
</p><p>You may combine the Document with other documents released under
 this License, under the terms defined in section 4 above for modified
 versions, provided that you include in the combination all of the
 Invariant Sections of all of the original documents, unmodified,
 and list them all as Invariant Sections of your combined work in
 its license notice, and that you preserve all their Warranty Disclaimers.
</p><p>The combined work need only contain one copy of this License,
 and multiple identical Invariant Sections may be replaced with a
 single copy. If there are multiple Invariant Sections with the same
 name but different contents, make the title of each such section
 unique by adding at the end of it, in parentheses, the name of the
 original author or publisher of that section if known, or else a
 unique number. Make the same adjustment to the section titles in
 the list of Invariant Sections in the license notice of the combined
 work.
</p><p>In the combination, you must combine any sections Entitled &quot;History&quot;
 in the various original documents, forming one section Entitled &quot;History&quot;;
 likewise combine any sections Entitled &quot;Acknowledgements&quot;,
 and any sections Entitled &quot;Dedications&quot;. You must delete
 all sections Entitled &quot;Endorsements&quot;.
</p><p>6. COLLECTIONS OF DOCUMENTS
</p><p>You may make a collection consisting of the Document and other
 documents released under this License, and replace the individual
 copies of this License in the various documents with a single copy
 that is included in the collection, provided that you follow the
 rules of this License for verbatim copying of each of the documents
 in all other respects.
</p><p>You may extract a single document from such a collection, and
 distribute it individually under this License, provided you insert
 a copy of this License into the extracted document, and follow this
 License in all other respects regarding verbatim copying of that
 document.
</p><p>7. AGGREGATION WITH INDEPENDENT WORKS
</p><p>A compilation of the Document or its derivatives with other separate
 and independent documents or works, in or on a volume of a storage
 or distribution medium, is called an &quot;aggregate&quot; if the
 copyright resulting from the compilation is not used to limit the
 legal rights of the compilation's users beyond what the individual
 works permit. When the Document is included an aggregate, this License
 does not apply to the other works in the aggregate which are not
 themselves derivative works of the Document.
</p><p>If the Cover Text requirement of section 3 is applicable to these
 copies of the Document, then if the Document is less than one half
 of the entire aggregate, the Document's Cover Texts may be placed
 on covers that bracket the Document within the aggregate, or the
 electronic equivalent of covers if the Document is in electronic
 form. Otherwise they must appear on printed covers that bracket the
 whole aggregate.
</p><p>8. TRANSLATION
</p><p>Translation is considered a kind of modification, so you may
 distribute translations of the Document under the terms of section
 4. Replacing Invariant Sections with translations requires special
 permission from their copyright holders, but you may include translations
 of some or all Invariant Sections in addition to the original versions
 of these Invariant Sections. You may include a translation of this
 License, and all the license notices in the Document, and any Warrany
 Disclaimers, provided that you also include the original English
 version of this License and the original versions of those notices
 and disclaimers. In case of a disagreement between the translation
 and the original version of this License or a notice or disclaimer,
 the original version will prevail.
</p><p>If a section in the Document is Entitled &quot;Acknowledgements&quot;,
 &quot;Dedications&quot;, or &quot;History&quot;, the requirement
 (section 4) to Preserve its Title (section 1) will typically require
 changing the actual title.
</p><p>9. TERMINATION
</p><p>You may not copy, modify, sublicense, or distribute the Document
 except as expressly provided for under this License. Any other attempt
 to copy, modify, sublicense or distribute the Document is void, and
 will automatically terminate your rights under this License. However,
 parties who have received copies, or rights, from you under this
 License will not have their licenses terminated so long as such parties
 remain in full compliance.
</p><p>10. FUTURE REVISIONS OF THIS LICENSE
</p><p>The Free Software Foundation may publish new, revised versions
 of the GNU Free Documentation License from time to time. Such new
 versions will be similar in spirit to the present version, but may
 differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
</p><p>Each version of the License is given a distinguishing version
 number. If the Document specifies that a particular numbered version
 of this License &quot;or any later version&quot; applies to it, you
 have the option of following the terms and conditions either of that
 specified version or of any later version that has been published
 (not as a draft) by the Free Software Foundation. If the Document
 does not specify a version number of this License, you may choose
 any version ever published (not as a draft) by the Free Software
 Foundation.
</p><p>ADDENDUM: How to use this License for your documents
</p><p>To use this License in a document you have written, include a
 copy of the License in the document and put the following copyright
 and license notices just after the title page:
</p><p>Copyright (c) YEAR YOUR NAME. Permission is granted to copy,
 distribute and/or modify this document under the terms of the GNU
 Free Documentation License, Version 1.2 or any later version published
 by the Free Software Foundation; with no Invariant Sections, no Front-Cover
 Texts, and no Back-Cover Texts. A copy of the license is included
 in the section entitled &quot;GNU Free Documentation License&quot;.
</p><p>If you have Invariant Sections, Front-Cover Texts and Back-Cover
 Texts, replace the &quot;with...Texts.&quot; line with this:
</p><p>with the Invariant Sections being LIST THEIR TITLES, with the
 Front-Cover Texts being LIST, and with the Back-Cover Texts being
 LIST.
</p><p>If you have Invariant Sections without Cover Texts, or some other
 combination of the three, merge those two alternatives to suit the
 situation.
</p><p>If your document contains nontrivial examples of program code,
 we recommend releasing these examples in parallel under your choice
 of free software license, such as the GNU General Public License,
 to permit their use in free software. 
</p>

</article>
