MS-DOS Kermit 3.00 Sample Key Settings Files
 
------------------------------
 
Date: Tue, 6 Feb 90 09:54 CST
From: "Kevin Lowey" <LOWEY%SASK.USask.CA@cuvmb.cc.columbia.edu>
Subject: Extended.ini - VT300 layout for IBM Extended keyboard
 
Hi,
 
  Below you will find an MS-KERMIT .INI file that I have put together
for use on campus here at the U of S.  It defines the IBM Extended
keyboard (as found on PS/2 computers) to be more like a VT300
terminal.
 
A complete listing of the key definitions is given in the listing
below.  Here is a short summary.
 
VT300                             IBM
Numbers on the keypad             Numbers on the keypad
Enter on the keypad               Enter on the keypad
- on keypad                       - on keypad
, on keypad                       + on keypad
Help key                          / on keypad
Do key                            * on keypad
PF1 through PF4                   F1 through F4
F5 through F12                    F5 through F12
F13 through F20                   Shift F5 through shift F12
Insert Here                       Insert on cursor pad
Remove                            Delete on the cursor pad
Previous Screen                   Page Up on the cursor pad
Next Screen                       Page Down on the cursor pad
FIND                              Home on the cursor pad
END                               Select on the cursor pad
 
The number pad definitions work no matter what state NUMLOCK is set to.
(That way I don't have to field questions from people saying this
didn't work simply because they forgot to press NUM-LOCK)
 
The definition does not include the F1 through F5 keys, however these
are not real "keys" on a VT200 keyboard, but more terminal control switches
that can be handled through other PC keys like Printscreen, etc.
 
I also added the SET DISPLAY 8, and the SET SEND PACKET 2000 and
SET RECEIVE PACKET 2000 statements at the bottom because these should
be used at our site.  You may wish to delete these.
 
- Kevin Lowey
 
========================= Cut Here ==================================
; MSKERMIT 3.00 .INI file for IBM Extended Keyboard
; Written by Kevin Lowey - University of Saskatchewan Computing Services
;                        - LOWEY@SASK.USASK.CA
; DATE: 2 February 1990
;
; USAGE:
; This INI file is guaranteed to work ONLY with IBM Extended keyboards
; as found with the IBM PS/2 computers.  It may work with others as well
; but don't be surprised if it doesn't.
;
; To use this file rename it MSKERMIT.INI and put it in the same
; directory as the MSVIBM.EXE (or KERMIT.EXE) file.
;
; DESCRIPTION:
; This file sets the IBM-PC Extended Keyboard so that it emulates the
; VT300 keyboard.
;
; It also sets some of the communication parameters and protocol
; paramters for use with our campus VAX and Unix systems.
;
;
; ********************* Keyboard Definitions ******************
;                           IBM KEY              DEC KEY
; Numeric Keypad
; There are two definitions for each of the numeric keypad keys,
; one for when <NUM-LOCK> is pressed, and one when it isn't.
set key \850 \kkp0        ; Keypad 0 (Nunlock)   Keypad 0
set key \338 \kkp0        ; Keypad 0 (Normal)    Keypad 0
set key \847 \kkp1        ; Keypad 1 (Numlock)   Keypad 1
set key \335 \kkp1        ; Keypad 1 (normal)    Keypad 1
set key \848 \kkp2        ; Keypad 2 (numlock)   Keypad 2
set key \336 \kkp2        ; Keypad 2 (normal)    Keypad 2
set key \849 \kkp3        ; Keypad 3 (Numlock)   Keypad 3
set key \337 \kkp3        ; Keypad 3 (Normal)    Keypad 3
set key \843 \kkp4        ; Keypad 4 (Numlock)   Keypad 4
set key \331 \kkp4        ; Keypad 4 (Normal)    Keypad 4
set key \844 \kkp5        ; Keypad 5 (Numlock)   Keypad 5
set key \332 \kkp5        ; Keypad 5 (Normal)    Keypad 5
set key \845 \kkp6        ; Keypad 6 (Numlock)   Keypad 6
set key \333 \kkp6        ; Keypad 6 (Normal)    Keypad 6
set key \839 \kkp7        ; Keypad 7 (Numlock)   Keypad 7
set key \327 \kkp7        ; Keypad 7 (Normal)    Keypad 7
set key \840 \kkp8        ; Keypad 8 (Numlock)   Keypad 8
set key \328 \kkp8        ; Keypad 8 (normal)    Keypad 8
set key \841 \kkp9        ; Keypad 9 (Numlock)   Keypad 9
set key \329 \kkp9        ; Keypad 9 (Normal)    Keypad 9
set key \330 \kkpminus    ; Keypad -             Keypad -
set key \334 \kkpcoma     ; Keypad +             Keypad ,
set key \851 \kkpdot      ; Keypad . (Numlock)   Keypad .
set key \339 \kkpdot      ; Keypad . (normal)    Keypad .
set key \4365 \Kkpenter   ; Keypad Enter         Keypad Enter
set key \4399 \kdechelp   ; Keypad /             Help (F15)
set key \311 \kdecDO      ; Keypad *             DO key (F16)
 
 
; F1 thru F20 keys        IBM                    DEC
                          ; F1                   Gold (PF1)
                          ; F2                   PF2
                          ; F3                   PF3
                          ; F4                   PF4
set key \319 \kbreak      ; F5                   BREAK
set key \320 \Kdecf6      ; F6                   DEC F6
set key \321 \Kdecf7      ; F7                   DEC F7
set key \322 \KdecF8      ; F8                   DEC F8
set key \323 \KdecF9      ; F9                   DEC F9
set key \324 \KdecF10     ; F10                  DEC F10
set key \389 \kdecF11     ; F11                  DEC F11 (ESC)
set key \390 \kdecF12     ; F12                  DEC F12 (BS)
set key \856 \kdecF13     ; Shift-F5             DEC F13 (LF)
set key \857 \kdecF14     ; Shift-F6             DEC F14
set key \858 \kdecHelp    ; Shift-F7             DEC HELP
set key \859 \kdecDO      ; Shift-F8             DEC DO
set key \860 \kdecF17     ; Shift-F9             DEC F17
set key \861 \KdecF18     ; Shift-F10            DEC F18
set key \903 \KdecF19     ; Shift-F11            DEC F19
set key \904 \kdecF20     ; Shift-F12            DEC F20
 
; Cursor Keypad
set key \4434 \kdecinsert ; INSERT               DEC insert
set key \4475 \kdecRemove ; DELETE               DEC Remove
set key \4423 \kdecFind   ; Home                 DEC Find
set key \4431 \KdecSelect ; END                  DEC SELECT
set key \4425 \KDecPrev   ; PGUP                 DEC PREV
set key \4433 \KDecNext   ; PGDN                 DEC NEXT
 
 
; ***************** Other settings ************************
; Maximum Packet Size
set send packet 2000
set receive packet 2000
 
; set the display to 8 bits so Word-11 et. al. work correctly
SET DISPLAY 8
 
------------------------------
 
Date: Tue, 6 Feb 90 09:58 CST
From: "Kevin Lowey" <LOWEY%SASK.USask.CA@cuvmb.cc.columbia.edu>
Subject: 88key.ini - VT300 layout for original IBM 88 key keyboard
 
Hi,
 
   This is an INI file I developed for use at the University of
Saskatchewan.  It makes all the VT300 keys available to people using
the original 88-key IBM-PC keyboard, using a "reasonable" layout.
 
The comments below explain how the keys have been layed out.
 
- Kevin Lowey
 
===================== Cut Here =================
; MS-Kermit 3.0 MSKERMIT.INI file for Old style 88-key keyboard
; Written by Kevin Lowey - University of Saskatchewan Computing Services
;                        - LOWEY@SASK.USASK.CA
; DATE: 2 Feb. 1990
;
; USAGE:
;    If you have the old style 88 key keyboard (with the function keys on
; the left hand side) then rename this file MSKERMIT.INI and place it in
; the same directory as the KERMIT.EXE (or MSVIBM.EXE) file.  That will make
; Kermit use this keyboard definition instead of its default settings.
;
; Key Definitions:
; Mapping the VT300 series keyboard to an old-style 88 key keyboard is not
; easy.  The following mapping is the best compromise I could come up with.
;
; The numeric keypad is mapped as follows:
;
;          IBM Function                   VT100 Keys
;     Normal      Shifted           On the Numeric Keypad
;  -------------------------      -------------------------
;  |  F1 |  F2 | SF1 | SF2 |      | PF1 | PF2 | PF3 | PF4 |
;  |-----+-----+-----+-----|      |-----+-----+-----+-----|
;  |  F3 |  F4 | SF3 | SF4 |      |  7  |  8  |  9  |  -  |
;  |-----+-----+-----+-----|      |-----+-----+-----+-----|
;  |  F5 |  F6 | SF5 | SF6 |      |  4  |  5  |  6  |  ,  |
;  |-----+-----+-----+-----|      |-----+-----+-----+-----|
;  |  F7 |  F8 | SF7 | SF8 |      |  1  |  2  |  3  |     |
;  |-----------+-----|-----|      |-----------+-----|ENTER|
;  |  F9 | F10 | SF9 |SF10 |      |     0     |  .  |     |
;  -------------------------      -------------------------
;
; The repetition of the F9 and F10 keys, as well as the SF8 and SF10 keys,
; was done for consistancy.
;
; The DEC F1 to F10 keys are mapped to the PC Control-F1 to Control-F10 keys.
; The DEC F11 to F20 keys are mapped to the PC ALT-F1 to ALT-F10 keys.
;
;  Definition               PC key         DEC key
set key \315 \kpf1        ; F1             PF1
set key \316 \kpF2        ; F2             PF2
set key \317 \kkp7        ; F3             Keypad 7
set key \318 \kkp8        ; F4             Keypad 8
set key \319 \kkp4        ; F5             Keypad 4
set key \320 \kkp5        ; F6             Keypad 5
set key \321 \kkp1        ; F7             Keypad 1
set key \322 \kkp2        ; F8             Keypad 2
set key \323 \kkp0        ; F9             Keypad 0
set key \324 \kkp0        ; F10            Keypad 0 (duplicate)
 
set key \852 \kpf3        ; Shift-F1       PF3
set key \853 \kpf4        ; Shift-F2       PF4
set key \854 \kkp9        ; Shift-F3       Keypad 9
set key \855 \kkpminus    ; Shift-F4       Keypad Minus
set key \856 \kkp6        ; Shift-F5       Keypad 6
set key \857 \kkpcoma     ; Shift-F6       Keypad Comma
set key \858 \kkp3        ; Shift-F7       Keypad 3
set key \859 \kkpenter    ; Shift-F8       Keypad Enter
set key \860 \kkpdot      ; Shift-F9       Keypad Dot
set key \861 \kkpenter    ; Shift-F10      Keypad Enter (duplicate)
 
set key \1374 \kholdscrn  ; Control-F1     F1
set key \1375 \kprtscn    ; Control-F2     F2
set key \1376 \khelp      ; Control-F3     Setup
; No Definition           ; Control-F4     F4
set key \1378 \kbreak     ; Control-F5     F5
set key \1379 \kdecF6     ; Control-F6     F6
set key \1380 \kdecF7     ; Control-F7     F7
set key \1381 \kdecF8     ; Control-F8     F8
set key \1382 \kdecF9     ; Control-F9     F9
set key \1383 \kdecF10    ; Control-F10    F10
 
set key \2408 \kdecF11    ; Alt-F1         F11
set key \2409 \kdecF12    ; Alt-F2         F12
set key \2410 \kdecF13    ; Alt-F3         F13
set key \2411 \kdecF14    ; Alt-F4         F14
set key \2412 \kdechelp   ; Alt-F5         Help (F15)
set key \2413 \kdecdo     ; Alt-F6         Do (F16)
set key \2414 \kdecF17    ; Alt-F7         F17
set key \2415 \kdecF18    ; Alt-F8         F18
set key \2416 \kdecF19    ; Alt-F9         F19
set key \2417 \kdecF20    ; Alt-F10        F20
 
; The following definitions define the DEC cursor keypad equivalents
set key \327  \kdecfind   ; HOME           FIND
set key \335  \kdecselect ; END            Select
set key \329  \kdecprev   ; PGUP           Previous Screen
set key \337  \kdecnext   ; PGDN           Next Screen
set key \330  \kdechelp   ; Keypad -       Help
set key \334  \kdecdo     ; Keypad +       Do
set key \338  \kdecinsert ; INSERT         INSERT
set key \339  \kdecremove ; DEL            REMOVE
 
; Other settings for University of Saskatchewan
SET DISPLAY 8
SET SEND PACKET 2000
SET RECEIVE PACKET 2000
 
------------------------------
 
Date:  5 FEB 90 16:16:58.50-GMT
From: VALIRON@FRGAG51.BITNET
Subject: Comments on Kermit 3.00
 
Many thanks for all of you who have worked on MS-Kermit 3.00. Very
impressive. Kermit operated PC's are now valuable competitors for most
alpha dedicated terminals.
 
I have extended the MSKERMIT.INI file and written two additional macro
files with the following purposes:
        - Simulating a VT300 keypad on 84-key and 102-key keyboards
        - Optional remap of french characters to ascii characters
          useful for programming applications. The macro file KEYBOARD.TAK
          is mapped to Cntrl-F1 and allows to select the desired mapping.
        - Automated file transfer macro procedure mapped to Cntrl-F2.
 
I include the procedures below. They might be used as additional templates
for Kermit users.
 
Best regards.
 
Dr. Pierre VALIRON             | bitnet:                     VALIRON@FRGAG51
Observatoire de Grenoble       | phone:                      +33 76 51 47 87
Groupe d'Astrophysique         |
Bat. CERMO                     | Fax:   Groupe Astro         +33 76 44 88 21
BP 53X  38041 Grenoble Cedex   |        IRAM                 +33 76 51 59 38
        FRANCE                 |
 
==============================================================================
COMMENT - File MSKERMIT.INI
COMMENT - For french PC's.
COMMENT - Minor corrections should be made on other national PC's.
COMMENT - (P. Valiron,  2 february 1990)
;
; FILE MSKERMIT.INI
;
; Sample initialization file for MS-DOS Kermit 3.00.
; Christine M. Gianone, January 1990
;
; Extended by P. Valiron
; Extra support to remap a VT300-like keypad on extended keyboards
; Extra support to remap french characters
;       ( Cntrl F1  and KEYBOARD.TAK )
;       ( Cntrl F2  and XFER.TAK )
 
echo \13MS-DOS Kermit 3.0 initialization file...
echo \13Extra support for french extended keyboards ( Cntrl F1 )
echo \13Macro XFER for file transfers               ( Cntrl F2 )
echo \13
 
COMMENT - KEYPAD section...
 
               ; Default definitions are appropriate when the F1-F10
               ; keys form a line above the keyboard.
 
;goto k84      ; For a 84-key keyboard, F1-F10 forming a left-handed rectangle
               ; Added some definitions, especially for VT200 keys.
 goto k102     ; Extended 102-key keyboard, plus above definitions
;goto finpad   ; Default Kermit mapping, plus above definitions.
;goto skippad  ; Stick to default definitions.
 
 
:k84
 
COMMENT - KEYPAD for 84-key keyboard, F1-F10 forming a left-handed rectangle
 
SET KEY \315  \Kgold        ; F1
SET KEY \316  \Kpf2         ; F2
SET KEY \2408 \Kpf3         ; Alt F1
SET KEY \2409 \Kpf4         ; Alt F2
;
SET KEY \317  \Kkp7         ; F3
SET KEY \318  \Kkp8         ; F4
SET KEY \2410 \Kkp9         ; Alt F3
SET KEY \2411 \Kkpminus     ; Alt F4
;
SET KEY \319  \Kkp4         ; F5
SET KEY \320  \Kkp5         ; F6
SET KEY \2412 \Kkp6         ; Alt F5
SET KEY \2413 \Kkpcoma      ; Alt F6
;
SET KEY \321  \Kkp1         ; F7
SET KEY \322  \Kkp2         ; F8
SET KEY \2414 \Kkp3         ; Alt F7
SET KEY \2415 \Kkpenter     ; Alt F8
;
SET KEY \323  \Kkp0         ; F9
SET KEY \324  \Kkp0         ; F10
SET KEY \2416 \Kkpdot       ; Alt F9
SET KEY \2417 \Kkpenter     ; Alt F10
;
SET KEY \339  \Kkp6         ;  .ANNUL    Cut/Paste
SET KEY \851  \Kkp6         ;  .ANNUL
SET KEY \338  \Kkpdot       ;  +INS      Select/Reset
SET KEY \850  \Kkpdot       ;  +INS
;
; Rolling screen memory:
; Default mapping ( Pgup, Pgdn, Cntl Pgup, Cntl Pgdn )
;
goto finpad
 
 
 
:k102
 
COMMENT - KEYPAD for an extended 102-key keyboard,
COMMENT - same disposition as native VT220/VT320
COMMENT - (excepted Gold as F12 and Erase C (comma) as Alt Del)
 
SET KEY \390  \Kgold        ; F12
SET KEY \4399 \Kpf2         ; keypad
SET KEY \311  \Kpf3         ; keypad
SET KEY \330  \Kpf4         ; keypad
;
SET KEY \327  \Kkp7         ; keypad
SET KEY \328  \Kkp8         ; keypad
SET KEY \329  \Kkp9         ; keypad
SET KEY \334  \Kkpminus     ; keypad
;
SET KEY \331  \Kkp4         ; keypad
SET KEY \332  \Kkp5         ; keypad
SET KEY \333  \Kkp6         ; keypad
SET KEY \2318 \Kkpcoma      ; Alt Del
;
SET KEY \335  \Kkp1         ; keypad
SET KEY \336  \Kkp2         ; keypad
SET KEY \337  \Kkp3         ; keypad
SET KEY \4365 \Kkpenter     ; ENTR
;
SET KEY \338  \Kkp0         ; keypad
SET KEY \339  \Kkpdot       ; keypad
;
; Mapping the mini keypad of the VT200
;
; The 6 keys above the direction arrows are mapped according to the
; indications on the keys, the disposition is thus different from the
; native disposition on a true VT200, but the functionality is the same.
;
; Mapping HELP and DO to F9 and F10.
; Function keys F6 to F20 are not yet mapped. Suggestions are welcome.
;
SET KEY \4434 \KdecInsert
SET KEY \4435 \KdecRemove
SET KEY \4423 \KdecSelect
SET KEY \4431 \KdecFind
SET KEY \4425 \KdecPrev
SET KEY \4433 \KdecNext
;
SET KEY \323  \KdecHelp     ; Help en F9
SET KEY \324  \KdecDO       ; DO en F10
;
; Rolling screen memory:
; Alt Pgup, Pgdn above the arrows, and Alt Arrows.
;
SET KEY \2457 \KUPSCN       ;  Alt Pgup
SET KEY \2465 \KDNSCN       ;  Alt Pgdn
SET KEY \2456 \KUPONE       ;  Alt Up
SET KEY \2464 \KDNONE       ;  Alt Down
SET KEY \2459 \KHOMSCN      ;  Alt Left
SET KEY \2461 \KENDSCN      ;  Alt Right
 
 
 
:finpad
 
COMMENT - Additional tricks.
 
SET KEY \782  \8            ;  \<-       Backspace
                            ;  Alt B     Break   (preset)
SET KEY \2350 \Kreset       ;  Alt C     Clear terminal
SET KEY \2341 \Khelp        ;  Alt K     Kermit Help menu
SET KEY \2329 \Kprtscn      ;  Alt P     Print screen
SET KEY \2324 \Ktermtype    ;  Alt T     Toggle Termtype
SET KEY \2326 \Kdump        ;  Alt U     dUmp screen to KERMIT.SCN
                            ;  Alt X     Return to Kermit> prompt (preset)
;
; Some extra definitions to simulate the missing VT200 keys on a 84-key
; keypad. These definitions can be kept here, and thus in use also on
; extended keyboards, or moved at the end of the specific redefinition
; for 84-key keyboards.
;
SET KEY \2336 \KdecDO       ;  Alt D     DO
SET KEY \2337 \KdecFind     ;  Alt F     Find
SET KEY \2339 \KdecHelp     ;  Alt H     Help
SET KEY \2327 \KdecInsert   ;  Alt I     Insert
SET KEY \2323 \KdecRemove   ;  Alt R     Remove
SET KEY \2335 \KdecSelect   ;  Alt S     Select
SET KEY \2351 \KdecPrev     ;  Alt V     Previous Page
SET KEY \2353 \KdecNext     ;  Alt N     Next Page
 
:skippad
 
 
 
COMMENT - Macro definitions section...
 
; Reserved variables.  If you define new macros, don't use these variables.
;  \%e - Last EDIT command filename.
;  \%n - Last DIAL command phone number.
 
; Macros for communicating with UNIX, VAX/VMS, and similar systems:
 
; VAX, MINITEL
def vax set par non, set display 8, set term VT320, set flo x, -
        set hand no, set dupl ful, set key \270 \127
def minitel set par even, set display 7, set term VT102, -
        set flo x, set hand no, set dupl ful, set key \270 \127
 
; Macro for communicating with IBM mainframes in linemode:
def ibm set par mark, set flo no, set hand xon, set dup ha, set key \270 \8
 
; Macro for communicating with IBM mainframes in fullscreen mode:
def fullscreen set par ev,set flo x,set hand no,set dupl ful,set key \270 \8
 
; Additional DOS commands available directly from the MS-Kermit> prompt.
 
; First define a FATAL error macro.
def fatal echo Error: \%1\13, def \%1, stop
 
; DOS MORE command...
def more if < argc 2 fatal $More what?,-
run more < \%1
 
; DOS REN(ame) command...
def rename if < argc 2 fatal $Rename what?,-
if < argc 3 fatal $Rename \%1 to what?,-
run ren \%1 \%2
 
; DOS COPY command...
def copy if < argc 2 fatal $Copy what?,-
if < argc 3 fatal $Copy \%1 to where?,-
run copy \%1 \%2
 
; DOS CHCP command to examine or change code page...
def chcp if = argc 1 run chcp,-
if = argc 2 run chcp \%1
 
; EDIT command...
; Replace "edlin" with your favorite editor or word processor.
def edit if = argc 2 assign \%e \%1,-
if not def \%e fatal $Edit what?,-
run ec \%e
 
; CAPTURE command - easy downloading of a file from the host.
; Unlike the LOG SESSION command, CAPTURE always creates a new file.
; It overwrites file of same name if it already exists.
; Usage: at the MS-Kermit> prompt, type "capture xxx" where xxx is the name
; of the file you want to create on the PC.  Once you are connected to the
; host, TYPE the desired file.  Escape back when done.  The captured file will
; be on your disk (with a TYPE command at the beginning & a prompt at the end).
def capture if = argc 1 fatal $Capture into what file?,-
if exist \%1 del \%1,-
log session \%1,-
connect,close session,log sess session.log,close ses,def \%1
 
; NOISY and CLEAN macros, modify to suit your environment...
def clean set rec pack 94, set retry 4, set bl 1
def noisy set rec pack 40, set retr 20, set bl 3
 
; ERRSTP macro, for use with DIAL command...
def errstp echo Error: \%1\13,def \%1,hangup,stop
 
; LOOKUP macro for use with DIAL command...
; The names and numbers shown here are not real.
; Replace them with ones you really use.
; You may also add or delete lines, but the entire macro definition
; cannot be more than 255 characters long.
;
; For MINITEL access : execute the macro MINITEL
; For VAX access, default mode 8bits, noparity: execute the macro "VAX"
;
def lookup -
  if eq \%1 gag-minitel  def \%1 xxxxxxxx,-
  if eq \%1 gag-fulldup  def \%1 yyyyyyyy,-
  if eq \%1 other-access def \%1 zzzzzzzz
 
; DIAL command...
; Requires the file HAYES.TAK to be on current disk or in DOS PATH.
; Uses LOOKUP and FATAL macros.
def dial if = argc 2 assign \%n \%1,-
  if < argc 2 if not def \%n fatal $Dial what?,-
  if > argc 2 fatal $No spaces please.,-
  lookup \%n,-
  take hayes.tak
 
COMMENT - Script defaults
 
set input timeout proceed       ; Allow IF SUCCESS/FAILURE to work
set input echo on               ; Display port input on screen
set input case ignore           ; Ignore alphabet case for input matching
set input default-timeout 1     ; One second default input timeout
 
COMMENT - Terminal emulation settings.  Modify to suit your environment.
 
;set display 8                  ; default for macro VAX
;set terminal vt320             ; default for macro VAX
set terminal roll on            ; Roll-back screens
set terminal wrap on            ; Tell Kermit to do line wrap
set terminal cursor underline   ; Underline cursor (rather than block)
set terminal character latin-1  ; Use ISO Latin-1 terminal character set
 
COMMENT - File transfer settings
 
set file warning on             ; Don't overwrite existing files
;set transfer character-set transparent  ; For compatibility with old versions
set transfer character-set latin1        ; To transfer multinational characters
set receive packet-length 94    ; Regular-size packets
set attributes on               ; Use file-attribute packets
set window 1                    ; Don't use sliding windows
 
COMMENT - Initial PC communication setup.  Modify to suit your PC and tastes.
 
set port 1                      ; Use COM1
do vax                          ; Set parameters for talking to VAX
                                ; (These are the default parameters anyway)
 
;set key \96 \27                ; Exchange ESC and
;set key \27 \96                ; accent grave keys during terminal emulation
 
;set terminal color 0 34 47             ; Terminal color is blue on white
 set terminal color 0 37 42             ; Nicer on black and white VGA
 
COMMENT - Support for KEYBOARD.TAK ( Ctrl F1 ) and XFER.TAK ( Ctrl F2 )
 
define terminalR def \%a inter, take keyboard.tak, def %a, connect
set key \1374   \KterminalR
 
define xfer take xfer.tak
define terminalS def \%a inter, take xfer.tak, def %a, connect
set key \1375   \KterminalS
 
take keyboard.tak                 ; Redefine the keyboard if wanted
set speed 19200                   ; Adjust speed to your convenience
  connect                         ; You might comment this line
 
------------------------------
 
