CONFIG2.CMD/-BF/-AU=SGNPER.CMD .; .; CONFIG2.CMD -- List peripheral configuration from .; saved answer file .; .;****************************************************************************** .; .; This software is provided on an "as is" basis only. Caterpillar Tractor Co., .; disclaims all warranties on the program, including without limitation, all .; implied warranties of merchantablity and fitness. .; .; Full permission and consent is hereby given to DECUS and to the DECUS .; special interest groups to reproduce, distribute, and publish and permit .; others to reproduce in whole or in part, in any form and without restriction .; this program and any information relating thereto .; .;****************************************************************************** .; .; Author: .; .; Rick Webster, Process Control Applications, MSDGO .; Caterpillar Tractor Co. .; .; Description: .; .; .; This command file is a modification of SGNPER.CMD that .; is called by CONFIG.CMD to list the csrs, vectors and .; other options for peripherals. .; .; .;---------------------------------------------------------------------- -19,19,/;RAW001/ -24,25,/;RAW001/ .SETF $FUD .IF $TTY EQ "C" .SETT $FUD .SETN AD 0 .SETN AF 0 .SETN AR 0 .SETN IC 0 .SETN IP 0 .SETN IS 0 .SETN LA 0 .SETN LS 0 .SETN UD 0 .SETN XB 0 .SETN XL 0 .SETN XM 0 .SETN XP 0 .SETN XQ 0 .SETN XU 0 .SETN XW 0 .SETN CR 0 .SETN GR 0 .SETN LP 0 .SETN PR 0 .SETN PP 0 .SETN DB 0 .SETN DD 0 .SETN DF 0 .SETN DK 0 .SETN DL 0 .SETN DM 0 .SETN DP 0 .SETN DR 0 .SETN DS 0 .SETN DT 0 .SETN DU 0 .SETN DX 0 .SETN DY 0 .SETN EM 0 .SETN CT 0 .SETN MF 0 .SETN MM 0 .SETN MS 0 .SETN MT 0 .SETN NL 0 .SETN CO 0 .SETN YL 0 .SETN YH 0 .SETN YZ 0 .SETN YJ 0 -123,130,/;RAW001/ .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; Peripheral configuration .IFF $TTCFG ; Peripheral configuration .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; Parameters appearing in square brackets "[...]" can only be .IFF $TTCFG ; Parameters appearing in square brackets "[...]" can only be .DATA #3 ; specified for the first controller of a particular device. .IFF $TTCFG ; specified for the first controller of a particular device. .DATA #3 ; Parameters appearing in parentheses "(...)" only need be specified .IFF $TTCFG ; Parameters appearing in parentheses "(...)" only need be specified .DATA #3 ; if the indicated option is present on the target system. .IFF $TTCFG ; if the indicated option is present on the target system. .DATA #3 ; .IFF $TTCFG ; -161,170,/;RAW001/ .DATA #3 ; The default for loadable drivers has been set to 'TEMPS'. .IFF $TTCFG ; The default for loadable drivers has been set to 'TEMPS'. .DATA #3 ; To override this setting enter 'TEMPS2' as the first parameter .IFF $TTCFG ; To override this setting enter 'TEMPS2' as the first parameter .DATA #3 ; for the first controller of the specified device. .IFF $TTCFG ; for the first controller of the specified device. .DATA #3 ; .IFF $TTCFG ; .GOTO 1131 .1130: .SETS LDBSTR "" .DATA #3 ; Loadable device driver support was not requested in the Executive .IFF $TTCFG ; Loadable device driver support was not requested in the Executive .DATA #3 ; portion of SYSGEN. Therefore you cannot specify any drivers as being .IFF $TTCFG ; portion of SYSGEN. Therefore you cannot specify any drivers as being .DATA #3 ; loadable. .IFF $TTCFG ; loadable. .DATA #3 ; .IFF $TTCFG ; -192,193,/;RAW001/ .DATA #3 ; A/D and Laboratory devices: 'TEMPS' .IFF $TTCFG ; A/D and Laboratory devices: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -209,,/;RAW001/ .IFT SAVERR .GOTO AD100 -223,239,/;RAW001/ -259,,/;RAW001/ .IFT SAVERR .GOTO AF100 -265,284,/;RAW001/ .AF20: .SETS TEMPS A'TEMPN'$3 -314,,/;RAW001/ .IFT SAVERR .GOTO AR100 -327,327,/;RAW001/ -340,357,/;RAW001/ -373,380,/;RAW001/ .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; IC and IS driver information display not supported by CONFIG .IFF $TTCFG ; IC and IS driver information display not supported by CONFIG .DATA #3 ; .IFF $TTCFG ; -386,392,/;RAW001/ .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; IP driver information display not supported by CONFIG .IFF $TTCFG ; IP driver information display not supported by CONFIG .DATA #3 ; .IFF $TTCFG ; -409,,/;RAW001/ .IFT SAVERR .GOTO LA100 -416,454,/;RAW001/ .LA20: .SETS TEMPS A'TEMPN'$3 -497,,/;RAW001/ .IFT SAVERR .GOTO LS100 -511,511,/;RAW001/ -533,549,/;RAW001/ -588,,/;RAW001/ .IFT SAVERR .GOTO UD100 -594,611,/;RAW001/ -658,,/;RAW001/ .IFT SAVERR .GOTO UD100 -684,686,/;RAW001/ .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; Interprocessor communication devices: 'TEMPS' .IFF $TTCFG ; Interprocessor communication devices: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -698,,/;RAW001/ .IFT SAVERR .GOTO XB100 -703,722,/;RAW001/ .XB20: -743,,/;RAW001/ .IFT SAVERR .GOTO XL100 -752,752,/;RAW001/ -757,774,/;RAW001/ -792,,/;RAW001/ .IFT SAVERR .GOTO XM100 -800,800,/;RAW001/ -810,825,/;RAW001/ -851,,/;RAW001/ .IFT SAVERR .GOTO XP100 -859,859,/;RAW001/ -864,881,/;RAW001/ -908,,/;RAW001/ .IFT SAVERR .GOTO XQ100 -917,917,/;RAW001/ -926,943,/;RAW001/ -966,,/;RAW001/ .IFT SAVERR .GOTO XU100 -975,975,/;RAW001/ -980,997,/;RAW001/ -1019,,/;RAW001/ .IFT SAVERR .GOTO XW100 -1028,1028,/;RAW001/ -1033,1050,/;RAW001/ -1071,1073,/;RAW001/ .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; Unit record devices: 'TEMPS' .IFF $TTCFG ; Unit record devices: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -1085,,/;RAW001/ .IFT SAVERR .GOTO CR100 -1090,1108,/;RAW001/ .CR20: -1134,,/;RAW001/ .IFT SAVERR .GOTO GR100 -1147,1187,/;RAW001/ -1229,,/;RAW001/ .IFT SAVERR .GOTO LP100 -1239,1242,/;RAW001/ .DATA #3 ; CONFIG -- Maximum of 8 printers allowed on a system with a KMC .IFF $TTCFG ; CONFIG -- Maximum of 8 printers allowed on a system with a KMC .SETF PRISMI -1251,1251,/;RAW001/ -1281,1298,/;RAW001/ -1320,,/;RAW001/ .IFT SAVERR .GOTO PP100 -1326,1344,/;RAW001/ .PP20A: -1365,,/;RAW001/ .IFT SAVERR .GOTO PR100 -1370,1388,/;RAW001/ .PR20: -1429,1431,/;RAW001/ .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; Disks: 'TEMPS' .IFF $TTCFG ; Disks: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -1452,,/;RAW001/ .IFT SAVERR .GOTO DB100 -1461,1461,/;RAW001/ -1475,1487,/;RAW001/ .GOTO DB02A .DB02: .DB02A: .SETS SAVAN $'UNITC'DB'TEMPN' .SETS SAVSTR "$'UNITC'DB'TEMPN' " .DATA #3 ; 52. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 52. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DB10: .SETS TEMPS2 $'UNITC'DB'TEMPN' -1491,1511,/;RAW001/ -1541,,/;RAW001/ .IFT SAVERR .GOTO DD100 -1550,1550,/;RAW001/ -1555,1574,/;RAW001/ -1603,,/;RAW001/ .IFT SAVERR .GOTO DF100 -1610,1631,/;RAW001/ .DF20: -1654,,/;RAW001/ .IFT SAVERR .GOTO DK100 -1662,1662,/;RAW001/ -1667,1686,/;RAW001/ -1716,,/;RAW001/ .IFT SAVERR .GOTO DL100 -1725,1725,/;RAW001/ -1733,1768,/;RAW001/ .GOTO DL02A .DL02: .DL02A: .SETS SAVAN $'UNITC'DL'TEMPN' .SETS SAVSTR "$'UNITC'DL'TEMPN' " .DATA #3 ; 53. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 53. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DL10: .SETS TEMPS2 $'UNITC'DL'TEMPN' .SETN TEMPN4 50000 .DL03: -1800,,/;RAW001/ .IFT SAVERR .GOTO DM100 -1809,1809,/;RAW001/ -1819,1849,/;RAW001/ .DM02: .SETS SAVAN $'UNITC'DM'TEMPN' .SETS SAVSTR "$'UNITC'DM'TEMPN' " .DATA #3 ; 54. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 54. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DM10: .SETS TEMPS2 $'UNITC'DM'TEMPN' .IF TEMPS2 EQ "RK07" .SETN TEMPN2 53790. -1877,,/;RAW001/ .IFT SAVERR .GOTO DP100 -1885,1885,/;RAW001/ -1894,1922,/;RAW001/ .DP02: .SETS SAVAN $'UNITC'DP'TEMPN' .SETS SAVSTR "$'UNITC'DP'TEMPN'" .DATA #3 ; 55. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 55. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DP10: .SETS TEMPS2 $'UNITC'DP'TEMPN' .IF TEMPS2 EQ "RP02" .SETN TEMPN2 0 .IF TEMPS2 EQ "RP02" .SETN TEMPN4 116100 -1958,,/;RAW001/ .IFT SAVERR .GOTO DR100 -1966,1966,/;RAW001/ -1979,2024,/;RAW001/ .DR02: .SETS SAVAN $'UNITC'DR'TEMPN' .SETS SAVSTR "$'UNITC'DR'TEMPN'" .DATA #3 ; 56. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 56. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DR10: .SETS TEMPS2 $'UNITC'DR'TEMPN' .DR03: -2056,,/;RAW001/ .IFT SAVERR .GOTO DS100 -2064,2064,/;RAW001/ -2075,2108,/;RAW001/ .DS02: .SETS SAVAN $'UNITC'DS'TEMPN' .SETS SAVSTR "$'UNITC'DS'TEMPN'" .DATA #3 ; 57. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .IFF $TTCFG ; 57. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' is an -- 'SAVAN' .SETF PRISMI .DS10: .SETS TEMPS2 $'UNITC'DS'TEMPN' .DS03: -2137,,/;RAW001/ .IFT SAVERR .GOTO DT100 -2145,2145,/;RAW001/ -2150,2169,/;RAW001/ -2211,,/;RAW001/ .IFT SAVERR .GOTO DU100 -2225,2225,/;RAW001/ -2232,2234,/;RAW001/ .SETS TEMPS A'TEMPN'$5 -2238,2258,/;RAW001/ -2286,,/;RAW001/ .IFT SAVERR .GOTO DX100 -2294,2294,/;RAW001/ -2299,2318,/;RAW001/ -2343,,/;RAW001/ .IFT SAVERR .GOTO DY100 -2351,2351,/;RAW001/ -2357,2387,/;RAW001/ .DY02: .SETS SAVAN $'UNITC'DY'TEMPN' .SETS SAVSTR "$'UNITC'DY'TEMPN'" .DATA #3 ; 58. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' density is -- 'SAVAN' .IFF $TTCFG ; 58. ['SAVSTR'] Contr 'TEMPN' unit 'TEMPN3.' density is -- 'SAVAN' .SETF PRISMI .DY10: .SETS TEMPS2 $'UNITC'DY'TEMPN' -2414,,/;RAW001/ .IFT SAVERR .GOTO EM100 -2422,2422,/;RAW001/ -2427,2446,/;RAW001/ -2477,2479,/;RAW001/ .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; Tapes: 'TEMPS' .IFF $TTCFG ; Tapes: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -2491,,/;RAW001/ .IFT SAVERR .GOTO CT100 -2497,2497,/;RAW001/ -2501,2520,/;RAW001/ -2546,,/;RAW001/ .IFT SAVERR .GOTO MF100 -2556,2556,/;RAW001/ -2562,2589,/;RAW001/ .SETN NSAVAN $'UNITC'MF'TEMPN' .SETS SAVSTR "$'UNITC'MF'TEMPN'" .DATA #3 ; 59. ['SAVSTR'] MF controller 'TEMPN' unit 'TEMPN3.' formatter -- 'NSAVAN' .IFF $TTCFG ; 59. ['SAVSTR'] MF controller 'TEMPN' unit 'TEMPN3.' formatter -- 'NSAVAN' .SETF PRISMI .MF10: .SETN TEMPN4 $'UNITC'MF'TEMPN' -2617,,/;RAW001/ .IFT SAVERR .GOTO MM100 -2627,2627,/;RAW001/ -2633,2660,/;RAW001/ .SETN NSAVAN $'UNITC'MM'TEMPN' .SETS SAVSTR "$'UNITC'MM'TEMPN'" .DATA #3 ; 51. ['SAVSTR'] MM controller 'TEMPN' unit 'TEMPN3.' formatter -- 'NSAVAN' .IFF $TTCFG ; 51. ['SAVSTR'] MM controller 'TEMPN' unit 'TEMPN3.' formatter -- 'NSAVAN' .SETF PRISMI .MM10: .SETN TEMPN4 $'UNITC'MM'TEMPN' -2688,,/;RAW001/ .IFT SAVERR .GOTO MS100 -2698,2726,/;RAW001/ .MS20: -2751,,/;RAW001/ .IFT SAVERR .GOTO MT100 -2761,2761,/;RAW001/ -2766,2785,/;RAW001/ -2808,2810,/;RAW001/ .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; Non-physical (pseudo) devices: CO'TEMPS', TI, CL, LB, SY .IFF $TTCFG ; Non-physical (pseudo) devices: CO'TEMPS', TI, CL, LB, SY .DATA #3 ; .IFF $TTCFG ; -2823,2824,/;RAW001/ -2837,2869,/;RAW001/ -2911,2913,/;RAW001/ .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; Terminal interface devices: 'TEMPS' .IFF $TTCFG ; Terminal interface devices: 'TEMPS' .DATA #3 ; .IFF $TTCFG ; -2929,,/;RAW001/ .IFT SAVERR .GOTO YL100 -2970,,/;RAW001/ .IFT SAVERR .GOTO YH100 -3007,,/;RAW001/ .IFT SAVERR .GOTO YJ100 -3036,,/;RAW001/ .IFT SAVERR .GOTO YZ100 -3055,3237,/;RAW001/ .TT100: .EOS1A: .DATA #3 ; .IFF $TTCFG ; .EOS1: .IFF PRISMI .DATA #3 ; .IFF PRISMI .IFF $TTCFG ; .DATA #3 ; End of interrupt vector area has been set to '$HIV.' .IFF $TTCFG ; End of interrupt vector area has been set to '$HIV.' .DATA #3 ; .IFF $TTCFG ; .GOTO 99901 -3241,,/;RAW001/ .SETF SAVERR -3249,3249,/;RAW001/ -3254,3254,/;RAW001/ .IF MES NE 0 .IFT NEWDEV .DATA #3 ; .IF MES NE 0 .IFT NEWDEV .IFF $TTCFG ; -3260,3323,/;RAW001/ .ZZ1: .DATA #3 ; Enter 'LDBSTR'vector, CSR for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR for: .GOTO ZZ0 .ZZ2: .DATA #3 ; Enter 'LDBSTR'vector, CSR, number of drives, unit number of first drive, .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, number of drives, unit number of first drive, .DATA #3 ; [O=offset recovery support/NO=no support] for: .IFF $TTCFG ; [O=offset recovery support/NO=no support] for: .GOTO ZZ0 .ZZ3:.IF DEV NE "DK" .GOTO ZZ3A .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; For the third parameter of the next question, enter the number .IFF $TTCFG ; For the third parameter of the next question, enter the number .DATA #3 ; of RK05 drives your target system has. Realize that an RK05F .IFF $TTCFG ; of RK05 drives your target system has. Realize that an RK05F .DATA #3 ; is a fixed media RK05 drive equivalent to two removable RK05 .IFF $TTCFG ; is a fixed media RK05 drive equivalent to two removable RK05 .DATA #3 ; drives. Specify every RK05F as two RK05s. .IFF $TTCFG ; drives. Specify every RK05F as two RK05s. .DATA #3 ; .IFF $TTCFG ; .ZZ3A:.DATA #3 ; Enter 'LDBSTR'vector, CSR, number of drives for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, number of drives for: .GOTO ZZ0 .ZZ4: .DATA #3 ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex, .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex, .DATA #3 ; E=error detec. unit/NO=no, C=char. detec unit/NO=no, .IFF $TTCFG ; E=error detec. unit/NO=no, C=char. detec unit/NO=no, .DATA #3 ; number of sync characters in leader for: .IFF $TTCFG ; number of sync characters in leader for: .GOTO ZZ0 .ZZ5: .DATA #3 ; Enter 'LDBSTR'vector, CSR, number of drives, unit number of first drive for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, number of drives, unit number of first drive for: .GOTO ZZ0 .ZZ7: .DATA #3 ; Enter vector, CSR, VT11/VS60, number of CRT monitors for: .IFF $TTCFG ; Enter vector, CSR, VT11/VS60, number of CRT monitors for: .GOTO ZZ0 .ZZ10: .DATA #3 ; Enter 'LDBSTR'CSR, number of A/D channels for: .IFF $TTCFG ; Enter 'LDBSTR'CSR, number of A/D channels for: .GOTO ZZ0 .ZZ11: .DATA #3 ; Enter 'LDBSTR'vector, CSR, number of A/D channels for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, number of A/D channels for: .GOTO ZZ0 .ZZ12: .DATA #3 ; Enter 'LDBSTR'clock vector, CSR, polarity mask, D=D/A channel/NO=no, .IFF $TTCFG ; Enter 'LDBSTR'clock vector, CSR, polarity mask, D=D/A channel/NO=no, .DATA #3 ; maximum number of samples/second, DRK=DR11-K/NO=no, .IFF $TTCFG ; maximum number of samples/second, DRK=DR11-K/NO=no, .DATA #3 ; (,DR11-K CSR) for: .IFF $TTCFG ; (,DR11-K CSR) for: .GOTO ZZ0 .ZZ13: .DATA #3 ; Enter 'LDBSTR'clock vector, CSR, # A/D channels, G=gain ranging option/NO=no, .IFF $TTCFG ; Enter 'LDBSTR'clock vector, CSR, # A/D channels, G=gain ranging option/NO=no, .DATA #3 ; polarity mask, bandwidth filter channel select delay, .IFF $TTCFG ; polarity mask, bandwidth filter channel select delay, .DATA #3 ; number of D/A channels, D=digital I/O option/NO=no, .IFF $TTCFG ; number of D/A channels, D=digital I/O option/NO=no, .DATA #3 ; maximum number of samples/second for: .IFF $TTCFG ; maximum number of samples/second for: .GOTO ZZ0 .ZZ14: .DATA #3 ; Enter 'LDBSTR'vector, CSR (, number of UMRs) for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR (, number of UMRs) for: .GOTO ZZ0 .ZZ15: .DATA #3 ; Enter 'LDBSTR'vector, CSR, # drives, O=offset recovery/NO=no offset rec. for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, # drives, O=offset recovery/NO=no offset rec. for: .GOTO ZZ0 .ZZ16: .DATA #3 ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex, .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex, .DATA #3 ; number of characters in sync leader for: .IFF $TTCFG ; number of characters in sync leader for: .GOTO ZZ0 .ZZ17: .DATA #3 ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex/P=primary HDX for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, F=full duplex/H=half duplex/P=primary HDX for: .GOTO ZZ0 .ZZ20: .DATA #3 ; Enter 'LDBSTR'vector, CSR, printer option .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, printer option .DATA #3 ; (,[KMC timeout count <0=no KMC>, KMC vector, KMC CSR]) for: .IFF $TTCFG ; (,[KMC timeout count <0=no KMC>, KMC vector, KMC CSR]) for: .GOTO ZZ0 .ZZ21: .DATA #3 ; Enter number of modules, module number of first for: .IFF $TTCFG ; Enter number of modules, module number of first for: .GOTO ZZ0 .ZZ22: .DATA #3 ; Enter 'LDBSTR'terminal number to redirect to (TTn:) for: .IFF $TTCFG ; Enter 'LDBSTR'terminal number to redirect to (TTn:) for: .GOTO ZZ0 .ZZ25: .DATA #3 ; Enter 'LDBSTR'vector, CSR, E=DL11-E modem support/NO=no for: .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, E=DL11-E modem support/NO=no for: .GOTO ZZ0 .ZZ26: .DATA #3 ; Enter vector, CSR, highest line number <0 to 15> .IFF $TTCFG ; Enter vector, CSR, highest line number <0 to 15> .DATA #3 ; (,answer speed, DM11-BB vector, DM11-BB CSR) for: .IFF $TTCFG ; (,answer speed, DM11-BB vector, DM11-BB CSR) for: .GOTO ZZ0 .ZZ27: .DATA #3 ; Enter vector, CSR, highest line number <0 to 15> for: .IFF $TTCFG ; Enter vector, CSR, highest line number <0 to 15> for: .GOTO ZZ0 .ZZ30: .DATA #3 ; Enter vector, CSR, highest line number <0 to 7> [, answer speed] for: .IFF $TTCFG ; Enter vector, CSR, highest line number <0 to 7> [, answer speed] for: .GOTO ZZ0 .ZZ31: .DATA #3 ; Enter 'LDBSTR'vector, CSR, number of drives, number of command rings, .IFF $TTCFG ; Enter 'LDBSTR'vector, CSR, number of drives, number of command rings, .DATA #3 ; number of response rings for: .IFF $TTCFG ; number of response rings for: .GOTO ZZ0 .ZZ0: .DATA #3 ; .IFF $TTCFG ; -3390,3391,/;RAW001/ .SETS BLANK " " .IF MES NE MSG .GOTO PROM1 -3398,3398,/;RAW001/ .SETS SAVAN $$UDX'NN' .SETS SAVSTR "$$UDX'NN'" .DATA #3 ; 'HASN.' ['SAVSTR'] UD controller 0 'TEMPS' module'TEMPS2' -- 'SAVAN' .IFF $TTCFG ; 'HASN.' ['SAVSTR'] UD controller 0 'TEMPS' module'TEMPS2' -- 'SAVAN' -3404,3404,/;RAW001/ .SETS SAVAN $$'DEV''NN' .SETS SAVSTR "$$'DEV''NN'" .SETS SHASN "'HAS'"+"'HASN.'" .TEST SHASN .SETS SPACE BLANK[1:''] .DATA #3 ; 'HAS''HASN.' ['SAVSTR'] 'DEV' controller 'NN' -- 'SAVAN' .IFF $TTCFG ; 'HAS''HASN.' ['SAVSTR'] 'DEV' controller 'NN' -- 'SAVAN' .DATA #3 ; 'SPACE' Defaults -- 'DEFX' .IFF $TTCFG ; 'SPACE' Defaults -- 'DEFX' -3455,3456,/;RAW001/ .DATA #3 ;  CONFIG -- Illegal trailing characters or extra parameters "'TEMPS2'" .IFF $TTCFG ;  CONFIG -- Illegal trailing characters or extra parameters "'TEMPS2'" .GOTO KILEX -3469,3470,/;RAW001/ .DATA #3 ; CONFIG -- Illegal character in numeric response .IFF $TTCFG ; CONFIG -- Illegal character in numeric response .GOTO KILEX -3481,3486,/;RAW001/ .DATA #3 ; CONFIG -- Loadable/Resident indication not valid for this device .IFF $TTCFG ; CONFIG -- Loadable/Resident indication not valid for this device .GOTO KILEX .PARZ2A: .IFT $LOD .GOTO PARZ2B .DATA #3 ; CONFIG -- Loadable driver support was not selected in the Executive .IFF $TTCFG ; CONFIG -- Loadable driver support was not selected in the Executive .DATA #3 ; section of SYSGEN. Device cannot be made loadable .IFF $TTCFG ; section of SYSGEN. Device cannot be made loadable .GOTO KILEX -3538,3538,/;RAW001/ -3543,3544,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#9) "'TEMPS'" out of range 'MIN9' to 'MAX9' .IFF $TTCFG ; CONFIG -- Parameter (#9) "'TEMPS'" out of range 'MIN9' to 'MAX9' .GOTO KILEX -3548,3549,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#8) "'TEMPS'" out of range 'MIN8' to 'MAX8' .IFF $TTCFG ; CONFIG -- Parameter (#8) "'TEMPS'" out of range 'MIN8' to 'MAX8' .GOTO KILEX -3553,3554,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#7) "'TEMPS'" out of range 'MIN7' to 'MAX7' .IFF $TTCFG ; CONFIG -- Parameter (#7) "'TEMPS'" out of range 'MIN7' to 'MAX7' .GOTO KILEX -3558,3559,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#6) "'TEMPS'" out of range 'MIN6' to 'MAX6' .IFF $TTCFG ; CONFIG -- Parameter (#6) "'TEMPS'" out of range 'MIN6' to 'MAX6' .GOTO KILEX -3563,3564,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#5) "'TEMPS'" out of range 'MIN5' to 'MAX5' .IFF $TTCFG ; CONFIG -- Parameter (#5) "'TEMPS'" out of range 'MIN5' to 'MAX5' .GOTO KILEX -3568,3569,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#4) "'TEMPS'" out of range 'MIN4' to 'MAX4' .IFF $TTCFG ; CONFIG -- Parameter (#4) "'TEMPS'" out of range 'MIN4' to 'MAX4' .GOTO KILEX -3573,3574,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#3) "'TEMPS'" out of range 'MIN3' to 'MAX3' .IFF $TTCFG ; CONFIG -- Parameter (#3) "'TEMPS'" out of range 'MIN3' to 'MAX3' .GOTO KILEX -3578,3579,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#2) "'TEMPS'" out of range 'MIN2' to 'MAX2' .IFF $TTCFG ; CONFIG -- Parameter (#2) "'TEMPS'" out of range 'MIN2' to 'MAX2' .GOTO KILEX -3583,3587,/;RAW001/ .DATA #3 ; CONFIG -- Parameter (#1) "'TEMPS'" out of range 'MIN1' to 'MAX1' .IFF $TTCFG ; CONFIG -- Parameter (#1) "'TEMPS'" out of range 'MIN1' to 'MAX1' .GOTO KILEX .BADNUM: .DATA #3 ; CONFIG -- Illegal numeric answer .IFF $TTCFG ; CONFIG -- Illegal numeric answer .GOTO KILEX .ZZ0: .DATA #3 ; .IFF $TTCFG ; -3600,3607,/;RAW001/ .DATA #3 ; CONFIG -- Valid duplex indicators are "H" and "F" .IFF $TTCFG ; CONFIG -- Valid duplex indicators are "H" and "F" .GOTO KILEX .MES4A: .IF A'N'$4 EQ "E" .OR .IF A'N'$4 EQ "NO" .GOTO MES4B .DATA #3 ; CONFIG -- Valid err detec expand unit indics. are "E" (yes) and "NO" (no) .IFF $TTCFG ; CONFIG -- Valid err detec expand unit indics. are "E" (yes) and "NO" (no) .GOTO KILEX .MES4B: .IF A'N'$5 EQ "C" .OR .IF A'N'$5 EQ "NO" .GOTO MES0 .DATA #3 ; CONFIG -- Valid char detec expan unit indics. are "C" (yes) and "NO" (no) .IFF $TTCFG ; CONFIG -- Valid char detec expan unit indics. are "C" (yes) and "NO" (no) .GOTO KILEX -3612,3613,/;RAW001/ .DATA #3 ; CONFIG -- Valid graphic device indicators are "VT11" and "VS60" .IFF $TTCFG ; CONFIG -- Valid graphic device indicators are "VT11" and "VS60" .GOTO KILEX -3617,3618,/;RAW001/ .DATA #3 ; CONFIG -- Maximum of 1 CRT monitor possible with VT11 .IFF $TTCFG ; CONFIG -- Maximum of 1 CRT monitor possible with VT11 .GOTO KILEX -3622,3626,/;RAW001/ .DATA #3 ; CONFIG -- Valid D/A present indicators are "D" (yes) and "NO" (no) .IFF $TTCFG ; CONFIG -- Valid D/A present indicators are "D" (yes) and "NO" (no) .GOTO KILEX .MES12A: .IF A'N'$6 EQ "DRK" .OR .IF A'N'$6 EQ "NO" .GOTO MES12B .DATA #3 ; CONFIG -- Valid DR11-K present indics. are "DRK"(yes) and "NO" (no) .IFF $TTCFG ; CONFIG -- Valid DR11-K present indics. are "DRK"(yes) and "NO" (no) .GOTO KILEX -3630,3631,/;RAW001/ .DATA #3 ; CONFIG -- Number of samples must be evenly divisable into 10000. .IFF $TTCFG ; CONFIG -- Number of samples must be evenly divisable into 10000. .GOTO KILEX -3636,3642,/;RAW001/ .DATA #3 ; CONFIG -- Valid offset-recovery indicators are O (yes) and "NO" (no) .IFF $TTCFG ; CONFIG -- Valid offset-recovery indicators are O (yes) and "NO" (no) .GOTO KILEX .MES16: .IF A'N'$3 EQ "H" .OR .IF A'N'$3 EQ "F" .GOTO MES0 .DATA #3 ; CONFIG -- Valid duplex indicators are "H" and "F" .IFF $TTCFG ; CONFIG -- Valid duplex indicators are "H" and "F" .GOTO KILEX .MES17: .IF A'N'$3 EQ "H" .OR .IF A'N'$3 EQ "F" .OR .IF A'N'$3 EQ "P" .GOTO MES0 .DATA #3 ; CONFIG -- Valid indicators are "H", "F", and "P" .IFF $TTCFG ; CONFIG -- Valid indicators are "H", "F", and "P" -3657,3659,/;RAW001/ .20B: .DATA #3 ; CONFIG -- Illegal printer specification -- Valid options are .IFF $TTCFG ; CONFIG -- Illegal printer specification -- Valid options are .DATA #3 ; LP11-A,B,C,D,F,H,J,K,R,S,V,W,Y,Z, LS11, LA180, and LV11 .IFF $TTCFG ; LP11-A,B,C,D,F,H,J,K,R,S,V,W,Y,Z, LS11, LA180, and LV11 .GOTO KILEX -3669,3670,/;RAW001/ .DATA #3 ; CONFIG -- More than 252. modules specified .IFF $TTCFG ; CONFIG -- More than 252. modules specified .GOTO KILEX -3678,3679,/;RAW001/ .MES21B: .IFF MODOK .DATA #3 ; CONFIG -- Overlapping modules .IFF MODOK .IFF $TTCFG ; CONFIG -- Overlapping modules .IFF MODOK .GOTO KILEX -3686,3686,/;RAW001/ .IF N EQ 0 .INC N .DATA #3 ;ADU01"S OR IAD-IA"S, NOT BOTH .IFF $TTCFG ;ADU01"S OR IAD-IA"S, NOT BOTH -3696,3702,/;RAW001/ .DATA #3 ; CONFIG -- DL11-E modem support is only valid with the full-duplex .IFF $TTCFG ; CONFIG -- DL11-E modem support is only valid with the full-duplex .DATA #3 ; terminal driver .IFF $TTCFG ; terminal driver .SETF DLE .GOTO KILEX .MES25A: .DATA #3 ; CONFIG -- Valid DL11-E modem support desired indicators are .IFF $TTCFG ; CONFIG -- Valid DL11-E modem support desired indicators are .DATA #3 ; "E" (yes) and "NO" (no) .IFF $TTCFG ; "E" (yes) and "NO" (no) .GOTO KILEX -3709,3711,/;RAW001/ .DATA #3 ; CONFIG -- Valid line speeds are 50, 75, 110, 134.5, 150, 200, .IFF $TTCFG ; CONFIG -- Valid line speeds are 50, 75, 110, 134.5, 150, 200, .DATA #3 ; 300, 600, 1200, 2400, 4800, and 9600 .IFF $TTCFG ; 300, 600, 1200, 2400, 4800, and 9600 .GOTO KILEX -3717,3720,/;RAW001/ .IF TEMPN2 LT 157777 .DATA #3 ; CONFIG -- DM11-BB CSR address must be greater than 157777 if specified - RETRY .IF TEMPN2 LT 157777 .IFF $TTCFG ; CONFIG -- DM11-BB CSR address must be greater than 157777 if specified - RETRY .IF TEMPN2 LT 160000 .GOTO KILEX .IF TEMPN LT 300 .DATA #3 ; CONFIG -- DM11-BB vector address must be greater than 277 if specified - RETRY .IF TEMPN LT 300 .IFF $TTCFG ; CONFIG -- DM11-BB vector address must be greater than 277 if specified - RETRY .IF TEMPN LT 300 .GOTO KILEX -3734,3737,/;RAW001/ .DATA #3 ; CONFIG -- To suppress remote support enter 0 for line speed, else .IFF $TTCFG ; CONFIG -- To suppress remote support enter 0 for line speed, else .DATA #3 ; valid line speeds are 50, 75, 110, 134.5, 150, 300, 600, .IFF $TTCFG ; valid line speeds are 50, 75, 110, 134.5, 150, 300, 600, .DATA #3 ; 1200, 1800, 2000, 2400, 3600, 4800, 7200, and 9600 .IFF $TTCFG ; 1200, 1800, 2000, 2400, 3600, 4800, 7200, and 9600 .GOTO KILEX -3741,3741,/;RAW001/ .DATA #3 ; .IFF $TTCFG ; -3745,3772,/;RAW001/ -3796,3817,/;RAW001/ -3845,3846,/;RAW001/ .NODEF1: .DATA #3 ; CONFIG -- Attempt to use non-existent default for parameter 'NONN' .IFF $TTCFG ; CONFIG -- Attempt to use non-existent default for parameter 'NONN' .KILEX: .DATA #3 ; .IFF $TTCFG ; .DATA #3 ; CONFIG -- Invalid data in saved answer file .IFF $TTCFG ; CONFIG -- Invalid data in saved answer file .DATA #3 ; .IFF $TTCFG ; .SETT SAVERR .RETURN -3856,3928,/;RAW001/ .DCB6: -3962,3966,/;RAW001/ -3975,4032,/;RAW001/ .SCBIC: -4036,4036,/;RAW001/ -4054,4083,/;RAW001/ .INC $DCBN .SETF Z .RETURN /