Using VTEDIT with the HEATHKIT H19 ---------------------------------- VTEDIT on a H19 terminal can be entered with the VTEDIT command and either of the switches /VT52 or /ANSI. The /ANSI switch is recommended as it was designed specifically with the H19 in mind. When VT edit is invoked, it transmits a code to put the H19 in its Alternate Keypad Mode. The keypad now will perform the special function operations of VTEDIT. VTEDIT also transmits a code to put the keypad in Keypad Shifted Mode. The keypad will there- fore send the arrows without the use of the shift keys, while in order to use the keypad keys you must hold down the shift key. If you would like the keypad to be non-shifted, simply go off line and type [>6l after you are in VTEDIT. The H19 special function keys correspond to the PF keys on a VT100 as described in the VTEDIT documentation as follows: H19 VT100 ------ ----- BLUE PF1 - 'GOLD' key RED PF2 GRAY PF3 f1 PF4 f2 - (on VT100 keypad) f3 , (on VT100 keypad) *keypad Following is a diagram of the H19 keypad and the functions associated with the various keys in different modes. 'NORMAL' is when the key is typed without typing the BLUE key first. 'GOLD' is the action taken when the BLUE key is typed immediately preceeding the keypad key. 'SHIFTED' is the action taken when the shift key is held down while the key is pressed ( assuming Keypad Shifted is enabled ). Function Keys: +-------+-------+-------+ +-------+-------+-------+ ! "f1" ! "f2" ! "f3" ! !"BLUE" ! "RED" ! "GRAY"! ! (PF4) ! (-) ! (,) ! ! (PF1) ! (PF2) ! (PF3) ! !delline!delword!delchar! <-gold-> ! gold !nextpag!fndnext! !undelln!undelw !undelc ! ! !lastpag! find ! +-------+-------+-------+ +-------+-------+-------+ Keypad: +--------+--------+--------+ ! "7" ! "8" ! "9" ! normal ! - - !cursorup! - - ! shifted !searchf !swapchr ! append ! gold !searchb !swaplin ! spcins ! +--------+--------+--------+ ! "4" ! "5" ! "6" ! normal !cursorlt! help !cursorrt! shifted ! bottom ! top ! paste ! gold ! fill ! center ! zapsel ! +--------+--------+--------+ ! "1" ! "2" ! "3" ! normal ! - - !cursordn! - - ! shifted ! word ! eol ! cut ! gold !lstword ! deleol ! chcase ! +--------+--------+--------+ ! "0" ! "." !"ENTER" ! normal !nextline! select !replace ! shifted !nextline! select !replace ! gold !breaklin! insoff ! setpat ! +--------+--------+--------+