The following utilities are provided by: Eddy Fey Utah Power and Light Room 125-51 P.O. Box 899 Salt Lake City, Utah 84110 801-535-2795 2591 E. Grand View Drive Sandy, Utah 84092 801-942-3185 1.0 Task-to-task Communications and Flying Install Subsystem. 1.1 RUNNER and INSREM Set of programs used to send parameters to a task, install the task, activate it and remove it upon exit. This is a complete 'flying install' subsystem and will work for permanently installed tasks as well (see RUNNER.DOC). 1.2 SNDPRM and RCVPRM Interface to RUNNER and INSREM for sending and receiving parameters. 1.3 VXDRV and VXUTIL This is yet another re-write of the VSDRV by Osudar. It provides mulitple units each capable of having 16kb of pool space. This will only work on RSX11M+ with I/D. 1.4 PIPE Interface to VXDRV QIO's for sending, receiving, creating queues. 1.5 SNDTST and RCVTST Test programs for demonstration. 2.0 CMB Compare binary. Compares two fixed length binary files for equality. Can be used for task images, data files, etc. 3.0 WATCHER Nifty patch for finding executive space memory clobbers. 4.0 IODUMP Dumps buffers in hex-ascii byte or word format. 5.0 BUGMSG Prints debug messages only if lun 4 is not assigned to the NL: device (i.e. TT: or HT:). 6.0 SYSMSG Prints messages on the system terminal device (ST0:). 7.0 CDUMP Searches a binary CDA file for a given pattern.