This UIC contains the files required to manufacture a Read-only ACP for ODS-2 file structures. The sources are made from the V3.0 RSX-11M+ kit. To build the ACP; Place the original SYSGEN sources on a volume. Copy the files in this UIC to a new directory at [13,14] on that volume. Execute @slipper. This makes the new macro sources in this uic from the sources in [13,10]. Execute @doall. The UIC of [13,24], [13,34], [1,54] are required on the volume. The RSXMC.MAC is required in LB:[11,10] and the EXEMC.MLB are required on LB:[1,1]. If you link in the debugger, the debugger will start at the first call to the ACP. i.e. 'Mount du:/ove/show' will produce the first break. Just do a go and the ACP is off and running. The ACP is not overlaid so the address are correct for a debug set-up. If you make a change to the sources, a command file called onefile will reassemble it for you. In [350,125] I have added a directory routine to use a modified PIP. With this PIP you can do directorys and copy files. The full file directory string has to be used. You must call out the full file string for it to work correctly. PIP clobbers the default directory string for partial file strings. Any Questions? Dan L. Eisner Perkin-Elmer Corporation 7421 Orangewood Avenue Garden Grove, California