Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000f99d0 pcibios_init : BIOS32 Service Directory entry at 0xf0530 pcibios_init : PCI BIOS revision 2.10 entry at 0xf0560 Probing PCI hardware. Calibrating delay loop.. ok - 149.91 BogoMIPS Memory: 30628k/32768k available (736k kernel code, 384k reserved, 832k data) This processor honours the WP bit even when in supervisor mode. Good. Swansea University Computer Society NET3.035 for Linux 2.0 NET3: Unix domain sockets 0.13 for Linux NET3.035. Swansea University Computer Society TCP/IP for NET3.034 IP Protocols: IGMP, ICMP, UDP, TCP VFS: Diskquotas version dquot_5.6.0 initialized Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 2.0.32 (root@porky.redhat.com) (gcc version 2.7.2.3) #1 Wed Nov 19 00:46:45 EST 1997 Starting kswapd v 1.4.2.2 Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A PS/2 auxiliary pointing device detected -- driver installed. Real Time Clock Driver v1.07 Ramdisk driver initialized : 16 ramdisks of 4096K size ide: i82371 PIIX (Triton) on PCI bus 0 function 9 ide0: BM-DMA at 0xe000-0xe007 ide1: BM-DMA at 0xe008-0xe00f Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 scsi : 0 hosts. scsi : detected total. Partition check: RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ncr53c8xx: at PCI bus 0, device 11, function 0 ncr53c8xx: 53c875 detected with Tekram NVRAM ncr53c875-0: rev=0x03, base=0xdf800000, io_port=0xd400, irq=10 ncr53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking ncr53c875-0: on-board RAM at 0xdf000000 ncr53c875-0: restart (scsi reset). ncr53c875-0: copying script fragments into the on-board RAM ... scsi0 : ncr53c8xx - revision 2.4a scsi : 1 host. Vendor: SEAGATE Model: ST31230N Rev: 0170 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0787 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 ncr53c875-0-<1,0>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15) SCSI device sda: hdwr sector= 512 bytes. Sectors= 2069860 [1010 MB] [1.0 GB] sda: sda1 sda2 < sda5 sda6 > VFS: Mounted root (ext2 filesystem) readonly. Trying to unmount old root ... okay Adding Swap: 66540k swap-space (priority -1)