From: jayes@persys.sta.sub.org (Juergen Schreier)

Well I sent you a Xconfig for the combination of ATI Graphics Ultra + and a 
MAG MX17S some months ago and just recently spent a few nights improving and 
adding a few modes as well. I am going to send it in the mail following this
one. Just have a look at it because I included a few testmodes and I don't 
know wheter it is a good idea to leave them in it or not.
What do you think ? They might be useful for people as a base to with.

# $XFree86: mit/server/ddx/x386/Xconfig.cpp,v 2.0 1993/10/08 15:55:00 dawes Exp $
# $XConsortium: Xconfig,v 1.2 91/08/26 14:34:55 gildea Exp $
#
# Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
# Copyright 1992,93 by David Dawes, David Wexelblat
#
# Permission to use, copy, modify, distribute, and sell this software 
# and its documentation for any purpose is hereby granted without fee, 
# provided that the above copyright notice appear in all copies and 
# that both that copyright notice and this permission notice appear in 
# supporting documentation, and that the names of the above listed authors 
# not be used in advertising or publicity pertaining to distribution of 
# the software without specific, written prior permission.  The above 
# listed authors make no representations about the suitability of this 
# software for any purpose.  It is provided "as is" without express or 
# implied warranty.
#
# THE ABOVE LISTED AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS 
# SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND 
# FITNESS, IN NO EVENT SHALL THE ABOVE LISTED AUTHORS BE LIABLE FOR 
# ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER 
# RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF 
# CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#
# Author:  Thomas Roell, roell@informatik.tu-muenchen.de
#
# Extensive modifications by the XFree86 Core Team

# **********************************************************************
# Refer to the Xconfig(4/5) man page for details about the format of 
# this file. This man page is installed as /usr/X386/man/man5/Xconfig.5x 
# **********************************************************************

# **********************************************************************
# Generic parameters section
# **********************************************************************

#
# some nice paths, to avoid conflicts with other X-servers
#
RGBPath		"/usr/X386/lib/X11/rgb"

#
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
FontPath	"/usr/X386/lib/X11/fonts/misc/"
FontPath	"/usr/X386/lib/X11/fonts/Type1/"
FontPath	"/usr/X386/lib/X11/fonts/Speedo/"
FontPath	"/usr/X386/lib/X11/fonts/75dpi/"
FontPath        "/usr/X386/lib/X11/fonts/misc/xconq/"
FontPath	"/usr/X386/lib/X11/fonts/100dpi/"

#
# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#
# NoTrapSignals

# **********************************************************************
# Input devices
# **********************************************************************

#
# Keyboard and various keyboard-related parameters
#
Keyboard
  AutoRepeat 500 5
  ServerNumLock
#  Xleds      1 2 3
#  DontZap
#
# To set the LeftAlt to Meta, RightAlt key to ModeShift, 
# RightCtl key to Compose, and ScrollLock key to ModeLock:
# 
 LeftAlt     Meta
 RightAlt    ModeShift
#  RightCtl    Compose
#  ScrollLock  ModeLock

#
# Mouse definition and related parameters
#
Busmouse	"/dev/bmouselogitec"
#MouseSystems 	"/dev/ttyS0"
#  BaudRate	9600
#  SampleRate	150
#  Emulate3Buttons

# **********************************************************************
# Graphics drivers
# **********************************************************************



# 
# The accelerated servers (S3, Mach32, Mach8, 8514)
#
ACCEL
 
 PseudoColor
 Chipset 	"mach32"
 Viewport       0 0
 Virtual	1024 768
 option 	"dac_8_bit"
 membase        0xF8000000
 Modes		"1152x864" "1136x864" "1280v1024" "1024v768" "1152v910a" "800v600" "1200x900" "1152x864f"


#Fuer ATI Graphics Ultra +
#For  ATI Graphics Ultra + (2 MB of DRAM) should also work for a ATI GUP
Clocks 100.70 126.20  92.40  36.10  51.50  56.70   0.00  44.90
Clocks 135.60  32.20 110.00  80.00  39.90  45.20  75.10  65.00
Clocks  50.35  63.10  46.20  18.05  25.75  28.35   0.00  22.45
Clocks  67.80  16.10  55.00  40.00  19.95  22.60  37.55  32.50


#
# For boards with a programmable clock generator, you use a line like:
#
# Clocks "icd2061a"

# **********************************************************************
# Database of video modes
# **********************************************************************
#ModeDB
# name        clock   horizontal timing     vertical timing      flags

ModeDB
#Fuer MAG MX17S:
#For  MAG MX17S:
#Some Monitor Specs for informational use (maybe if yours match
# the same specs you can use those modes as well):
# Scanning Frequency: Vertical   : 50Hz to 120 Hz
#                     Horizontal : 30 kHz to 64kHz
# Video Bandwidth   :              100 MHz min. at -3dB
# Input Signal 	    : Video	 : analog, 0.7 Vpp 75 Ohm
                                   analog, 1.0 Vpp 75 Ohm (sync-on-green)
		      Sync	 : Separate or Composite
				   Positice or negative TTL

                                    
#User Mode 3: 62 kHz / 59.5 Hz
"1280v1024"   110     1280 1392 1584 1760    1024 1017 1020 1044
#Mein erster Mode eigentlich ganz gut aber verbessrungsbeduerftig
#User Mode 5: 55.75 kHz / 60Hz
"1152v910a"    80     1152 1192 1424 1424     910  910  924  936
# 62Khz / 66.5Hz  Michael Wills defaultaufloesung
"1152x900"    92.40   1152 1144 1160 1448     900 901 931  939
#User Mode 2: 65.25 kHz / 72Hz 
"1152x864"    100.7   1152 1240 1488 1528     864 867 877 907
#Auch nett: 61.25kHz / 65.5Hz
"1200x900"     100.7   1200 1232 1584 1616     900 903 913 945
#User Mode 6: Out of Spec (deshalb ein wenig unscharf)  67 kHz / 74Hz 
"1152x864f"    110     1152 1272 1520 1624	864 867 877 907
#User Mode 4: 60.25kHz / 67.9 Hz flickert kaum - geht !!
"1136x864"     92.40   1136 1176 1424 1520       852 855 865 895
#User Mode 7: 60.75 kHz / 77.5 Hz: (genialer Modus)
"1024x768"     80     1024 1076 1152 1304     768  768  773  786
#Eine Alternative: 60.25 kHz / 75 Hz
"1024v768"     80     1024 1076 1298 1320     768  772  774  803
#User Mode 8: 45.25 kHz / 73.5 Hz
"800v600"      51      800  980 1072 1112     600  600  601  615

#The above and below modes were made by jayes@persys.sta.sub.org
#if you have got any troubles or questions feel free to ask !

#Testmodes do not use blindly only if you know what you are doing
#Testmodi mal sehen was daraus wird:
#"1152x910t"   92.40   1152 1144 1176 1408     910  902  918  936
#"1152x910t"   92.40   1152 1174 1424 1424     910  910  912  914
#"1152x910t"   92.40   1152 1188 1260 1332     900  901  911  912

#Testmode for 1280x960 with 135MHz DCF; this could work if your Monitor
#has 115Hz (or more) Vertical Scanning Frequency.
#DO NOT USE IT OTHERWISE - it could fry your hardware
#"1280x960" 135  1280 1436 1956 2112  960 968 984 1008
#
# Refer to README.Config, modeDB.txt, and VideoModes.doc for actual
# modes, and information on how to calculate and adjust them.  
#
# DO NOT BLINDLY USE VIDEO MODES WITHOUT UNDERSTANDING WHAT YOU ARE
# DOING.  IT IS POSSIBLE TO DAMAGE THE MONITOR.  THE XFree86 CORE TEAM
# DISCLAIMS ALL LIABILITY FOR MONITOR DAMAGE, AS THE DOCUMENTATION
# ACCOMPANYING XFree86 HAS BEEN VERIFIED TO CONTAIN VALID AND SAFE
# MODES, AS LONG AS ONLY ONES WITHIN DOCUMENTED MONITOR SPECIFICATIONS
# ARE USED.
#

>From bcr@cernapo.cern.ch  Mon Aug 22 11:12:16 1994
Received: from dxmint.cern.ch (root@localhost)
	by bohr.physics.purdue.edu (8.6.8.1/3.0-LD) with SMTP
	id LAA28097; Mon, 22 Aug 1994 11:12:14 -0500
Received: from cernapo.cern.ch by dxmint.cern.ch (5.65/DEC-Ultrix/4.3)
	id AA22711; Mon, 22 Aug 1994 18:10:35 +0200
Message-Id: <9408221610.AA22711@dxmint.cern.ch>
Received: by cernapo; Mon, 22 Aug 94 18:10:27 +0200    
Date: Mon, 22 Aug 94 18:10:27 +0200
From: bcr@cernapo.cern.ch (Bill Riemers )
To: bcr@physics.purdue.edu
Subject: *getmail_forward*

