Subject: Linux-Activists Digest #273
From: Digestifier <[email-masked]>
To: [email-masked]
Date: Wed, 29 Sep 93 10:13:11 EDT

Linux-Activists Digest #273, Volume #6           Wed, 29 Sep 93 10:13:11 EDT

Contents:
  Term Binaries needed (bryan k williams)
  Re: DigiBoard to support Linux!!!! (David Jeske)
  Wanted!!! HP emulation ([email-masked])
  Re: [HELP] Problems with Slackware Linux and 'hostname' (Steef S.G. de Bruijn)
  p2c for linux - sources where? (Philip Rhoades)
  Re: SoftLanding Message (Terror on Tape)
  WHAT HAVE I TO DO TO SET UP THE .PROFILE ([email-masked] (Rachid BELMOUHOUB ))
  Re: term? (R. Stewart Ellis)
  Problem with cat and tty (Stefan Karrmann)
  Re: Term Binaries needed (R. Stewart Ellis)
  Re: WordProcessor (~=TEX) for Linux (Mark A. Davis)
  Read/Write CD drivers for Linux? ([email-masked])
  New 209 Meg Seagate Hard Drives $145.00 NICE PRICE (Dr. John V. Jaskolski)
  WHERE IS THE FILE .Xresources In the SLS 1.03  ([email-masked] (Rachid BELMOUHOUB ))
  Installing LINUX together with OS/2 and MSDOG (Heinrich "Heiner" Hellmann)

----------------------------------------------------------------------------

From: [email-masked] (bryan k williams)
Subject: Term Binaries needed
Date: Wed, 29 Sep 1993 07:18:12 GMT

I need to get binaries for term for a sun 4 target machine. I
have term 1.07 running on Linux and on my campus NeXT and I'm pleased as
punch about the remote Xwindows capability but the real reason I started 
tweaking with term to begin with was to use it on our sun server. As
best I can tell it is a sun 4, as the compiler flags seem to indicate when
I attempt to make term and related files on the Sun. (never laid eyes
on the real machine). BUT for some reason the makefile pukes all over me
on the sun, it seems that it has a pre-ansi version of 'cc' - (is that likely??)
at least it seems unable to make heads or tails of ANSI-style prototypes.
Am I possibly overlooking a flag there? Anyway, I need one of two things:
 
term binaries built for Sun 4, or, 
a kick in the head with the correct CCFLAGS to make the binaries.

Any help earns my eternal gratitude....

------------------------------

From: [email-masked] (David Jeske)
Crossposted-To: comp.os.linux.misc
Subject: Re: DigiBoard to support Linux!!!!
Date: 29 Sep 1993 08:11:41 GMT

[email-masked] (Gregory Gulik) writes:

>I guess all that nagging worked!!!!

>I just got off the phone with tech support at DigiBoard, and I
>was told they will have Linux drivers available for their products
>in about 8 weeks!!!!

Well, I decided to write a "Intelligent Board Driver" For Linux 4 days ago,
today As of today the board configuration and initilization works , as well
as input and output. No DCD/DTR ioctl calls are supported yet, but they will 
be. I'm expecting to release source to the drivers as "alpha" withen 2 weeks.
These are initially going to support "Digboard PC/8i, PC/16i, PC/8e,PC/16e,
PC/8m, PC/16m" but soon after "Star Gate ACL" will be supported, as well
as Digiboard COM/xx products. Others are on the list. 

 I was online on IRC for 2 hours with the Driver, and it seemed to hold up
 to the "non-demanding" but "constant" character stream rather well. It's
 coming along nicely, and the package I'm writing is designed to allow
 easy addition of different types of serial boards, and have it all be 
 dynamically allocated (from the minor numbers) at run time.

-- 
David Jeske(N9LCA)/CompEng Student at Univ of Ill at Cham-Urbana/NeXT Programmer
CoCreator of the GTalk Chat Software System  - online at (708)998-0008
Mail:  [email-masked]    NeXTMail: [email-masked]
       [email-masked]    Talk: [email-masked]

------------------------------

From: [email-masked]
Subject: Wanted!!! HP emulation
Date: Wed, 29 Sep 1993 09:16:07 GMT

  Wanted!!!   Want to know how to set Linux xterm to imitate a HP700/92 or 96
terminal.  Or want to know what package can do this.  

I am using Linux SLACKware
version .9PL13Alfa  Was fighting with SLS and tried the Slackware version. SLS
has better install but I like the Slackware version MUCH better when it comes 
to use.

  I have my linux box on the network and now telnet to my HP300 mini computer
to do my work.  I also goto my VAX as a VT100.  Unfortionatly the 3000 wants
hp terminal emulation.  what I want to do is make it look to the 3000 as if I
am on a hp terminal.  I want it to look right on my end to.   Right now
if I use the VT100 it hanges if I use any HP only stuff.  Can I set the
termcap for xterm to use only hp emulation and have xterm emulate a hp term.
Then in another session use vt100???
  
email to: Robert J. Hale III
          [email-masked]

------------------------------

From: [email-masked] (Steef S.G. de Bruijn)
Subject: Re: [HELP] Problems with Slackware Linux and 'hostname'
Date: Wed, 29 Sep 1993 08:26:19 GMT

In article <[email-masked]>, Ian Clysdale <[email-masked]> writes:
|>      Recently I set up Slackware Linux running on my PC, and have it
|> pretty much running well right now, except for one small problem --
|> it refuses to define my hostname; it came defined as 'darkstar' in
|> the distribution that I got, and refuses to change.
|>      I did a little reading, and found out that apparently the command
|> "hostname -S elanon" should change the name of my system to "elanon",
|> but whenever I do that, it responds with "unknown system "elanon" ".
|> Even when I tried hostname -S darkstar for a test, it still responded
|> 'unknown system "darkstar" '.  
|>      If anyone can help, please reply via e-mail to 
|> [email-masked]  Thank you very much.
|> 
|>                                                                              -Ian!
|> 
|> Ian Clysdale                                 |  |    One .sig file to rule them all,
|> Co-Op, Bell Northern Research        |  |    One .sig file to find them,
|> Ottawa, Ontario, Canada.             |  |    One .sig file to bring them all,
|> #include<stdisclaim.h>                       |  |    And in the memory bind them.

I presume you did install Slackware 1.0.3.

There exist two files in /conf/net.  One of them defines the hostname.

In /etc there are several more files containing the hostname darkstar.
Do a grep -l darkstar /etc/* and you get a list of files containing it.
Just edit these files and fill in your desired hostname.

I did it and i'm happily using my machine `hurricane' for about
a week now.

Good luck, althouh i suggest people SEARCH first before posting this kind of
articles...

Steef
E-Mail: [email-masked]

------------------------------

From: [email-masked] (Philip Rhoades)
Subject: p2c for linux - sources where?
Date: Wed, 29 Sep 1993 08:06:27 GMT

Where can I find the sources for p2c (for linux)? There is a change I need
to make to hopefully fix a problem with a p->c conversion that I want to
do - LL1, a parser generator. 

Anyone know where they are? - I've looked on all the obvious hosts.

Thanks.
-- 
Philip Rhoades  *  First Year Biology  *  University of Sydney
[email-masked] (best) or [email-masked]
Phone: +61 2 692 2765  *  Fax: +61 2 692 2175

------------------------------

From: [email-masked] (Terror on Tape)
Subject: Re: SoftLanding Message
Date: Wed, 29 Sep 1993 09:20:54 GMT

In article <[email-masked]> [email-masked] (William S. Kaster) writes:
>Yes.  getty displays /etc/issue.
oh, also, go ahead & edit /etc/motd for the message you get after
you log in. (don't know what calls it, tho')

-jonM
>--
>-----
>William S. Kaster        
>email: [email-masked]   
>

-- 
[email-masked]     <><
DJ.AllStar
get Linux OS, it's dope! it's free! it's UNIX!

------------------------------

Crossposted-To: comp.os.linux.misc.help,comp.os.linux
From: [email-masked] (Rachid BELMOUHOUB <[email-masked]>)
Subject: WHAT HAVE I TO DO TO SET UP THE .PROFILE
Date: Wed, 29 Sep 93 12:32:06 GMT

Hi,
 I have succefully now installed the SLS 1.03 release, on my 486DX50 clone,
 I went through the Linux user's guide in search of informations about how to
 configur my system but haven't found lot of things about the file .profile
 I tryed to set the PATH environment variable to run X11, I did like in my
 .cshrc file on a sun at work but after sourcing the .profile, I have run
 printenv and none of the changes I've made was taken, I tryed unset PATH
 and I had an answer that the systen can't unset PATH. Is there any document
 that explains how to do this, or any one here that could help me.

 Thanx

 Rachid 

================================================================================
Rachid BELMOUHOUB ( rsm pour les amis )      E-mail:[email-masked]
Ecole des Mines de Paris
Centre d'Informatique Geologique

"si parvenir aupres de l'ami, est impossible. | "A Woman needs a man like 
L'autre ami se devra de mourir, le cherchant" |  fish needs a bicycle" U2  :-)
( Le Gulistan, Saadi poete et soufi Persan)   |

------------------------------

From: [email-masked] (R. Stewart Ellis)
Subject: Re: term?
Date: 29 Sep 93 12:54:21 GMT

[email-masked] (Craig Ashcroft  Willmott       ) writes:

>In <ellis.749266741@nova> [email-masked] (R. Stewart Ellis) writes:

>>This is like saying a Ferrari is a wagon (they both have wheels and someone
>>can ride in both).  Term allows you to set up a socket over a modem

[delete]

 >I'm also a newcomer to the Linux world, I've had it installed for five
 >days now, and a lot of that has been spent on Kermit and term.
 >What I want to do is attach a socket at uni to a socket on linux, or
 >more specifically, to a login prompt.

 >I've got term going fine, so that I can trsh back and forth. Then I tried
 >to use tredir to connect the sockets setup. So from uni I did
 >      tredir 12345 23
 >thinking that this should attach the remote port 12345 to my telnet
 >port. Also I tried 12345 by itself, hoping it would just create a login.
 >When trying to connect from uni, (telnet <local> 12345) I get
 >a connection but then nothing happens. Is there something wrong with
 >my telnet connection? It works just fine when I telnet localhost 23
 >from home.

Here is the screen output from my doing what you are trying.  I am at home
on solo.  The remote machine is nova, my campus Sun 4/690 running SunOS
4.1.3.

solo_bstew> trsh
Remote: term 1.0.7
tty /dev/ttype. Exec /faculty/ellis/bin/sun4/tcsh
In cshrc
resize: No `co#'
[1](ttype)_nova_ellis_~/> tredir 2323 23
Redirecting 2323 to 23
[2](ttype)_nova_ellis_~/> telnet nova 2323
Trying 192.138.137.2 ...
Connected to nova.
Escape character is '^]'.

UNIX(r) System V Release 4.0 (solo)

login: bstew
Last login: Sun Sep 26 19:33:48 on console
solo:/usr2/stew>

Here I am tearing down the connection:

[4](ttype)_nova_ellis_~/> ps -auxww |grep tredir
ellis    20150  0.0  0.2   32  204 pe S    08:57   0:00 grep tredir
ellis    20023  0.0  0.0   32    0 ?  IW   08:52   0:00 tredir 2323 23
[5](ttype)_nova_ellis_~/> kill -9 20023
[6](ttype)_nova_ellis_~/> ps -auxww | grep tredir
ellis    20158  0.0  0.2   32  204 pe S    08:58   0:00 grep tredir
[7](ttype)_nova_ellis_~/> exit
solo_bstew> 

tredir scare the crap out of me.

 >Also, when I trsh back into linux, some characters (in particular line
 >feeds) don't get through. According to the man, I can set up my
 >~.term/termrc file to escape these characters. How do you do that?
 >Is termrc executed before an rsh is set up or what?
 >Also, after I run tredir, my trsh dies (freezes). Is this supposed
 >to happen?

There are a couple of gotchas:
1) Make sure the termrc on one and only one end has the word remote in it.
2) Run linecheck and put the recommendations on both ends (most people say
just the other end, but it does not hurt to be conservative here).  If
linecheck does not tell you to escape CR/LF then look at your inittab,
gettytab or wherever you set up logins on Linux.  Follow the examples in the
includede termrc.

-- 
  R.Stewart(Stew) Ellis, Assoc.Prof., (Off)313-762-9765   ___________________
  Humanities & Social Science,  GMI Eng.& Mgmt. Inst.    /   _____  ______ 
  Flint, MI 48504      [email-masked]               /        / /  /  / /
  Gopher,News and sendmail maintainer, all around hack /________/ /  /  / /

------------------------------

From: [email-masked] (Stefan Karrmann)
Subject: Problem with cat and tty
Date: 29 Sep 1993 12:50:15 GMT
Reply-To: [email-masked]

I have linux 0.99pl4-1. When I execute cat /usr/bin/emacs (or some -not all-
binary files) the output of the tty are ridiculous characters. I cannot change
this behavior. What has happened ?

Thanks, Karrmann

------------------------------

From: [email-masked] (R. Stewart Ellis)
Subject: Re: Term Binaries needed
Date: 29 Sep 93 13:13:32 GMT

[email-masked] (bryan k williams) writes:

 >I need to get binaries for term for a sun 4 target machine. I
 >have term 1.07 running on Linux and on my campus NeXT and I'm pleased as
 >punch about the remote Xwindows capability but the real reason I started 
 >tweaking with term to begin with was to use it on our sun server. As
 >best I can tell it is a sun 4, as the compiler flags seem to indicate when
 >I attempt to make term and related files on the Sun. (never laid eyes
 >on the real machine). BUT for some reason the makefile pukes all over me
 >on the sun, it seems that it has a pre-ansi version of 'cc' - (is that likely??)
 >at least it seems unable to make heads or tails of ANSI-style prototypes.
 >Am I possibly overlooking a flag there? Anyway, I need one of two things:
 > 
 >term binaries built for Sun 4, or, 
 >a kick in the head with the correct CCFLAGS to make the binaries.

The real C standard is still K&R, 1st edition.  Lots of UNIX boxes,
including Suns running SunOS 4.1.3 , do not have ANSI support.  Many sites
have installed GCC to get ANSI support.  You might set CC=gcc in the
top-level Makefile.

If you are running Linux then RUN don't walk to sunsite.unc.edu and look at
all the wonderful linux goodies.  Follow your nose down to
Linux/apps/comm/term and you will find Sun4 binaries.

 >Any help earns my eternal gratitude....

-- 
  R.Stewart(Stew) Ellis, Assoc.Prof., (Off)313-762-9765   ___________________
  Humanities & Social Science,  GMI Eng.& Mgmt. Inst.    /   _____  ______ 
  Flint, MI 48504      [email-masked]               /        / /  /  / /
  Gopher,News and sendmail maintainer, all around hack /________/ /  /  / /

------------------------------

From: [email-masked] (Mark A. Davis)
Subject: Re: WordProcessor (~=TEX) for Linux
Date: Wed, 29 Sep 1993 12:43:44 GMT

[email-masked] (R. Stewart Ellis) writes:

>[email-masked] (Mark A. Davis) writes:

>>[email-masked] writes:

>>>In article <[email-masked]>, [email-masked] (Steef S.G. de Bruijn) writes:
>>>> |> a la WordPerfect for Linux. 

>>>I think he means Framemaker for Linux, or 'Word for Linux' :-)

>>>> Wordperfert sucks (it's no misspell!)

>>>Don't u mean worddefect, as its know here. We have it one the Vomit Making
>>>System.

>>Kindly keep your personal and unproductive comments to your self.  We find
>>the software to be extremely productive, flexible, cost effective, and
>>open.  Perhaps you two should tell us which wordprocessors you use and like
>>so others can say yours suck.  

>>Also, perhaps you should enlighten us as
>>to a better wordprocessing system under Unix?  Framemaker isn't bad, but
>>TERRIBLY expensive.

>Starting with the recognition that WP is available on the widest range of
>systems, which gives it a tremendous headstart, it has a number of serious
>problems.

All software has its share of problems.

>  I have seen signed postings from a guy who used truss on SVR4 to
>observe wp opening a config file 500 times while it was starting up.  This
>is consistent with the startup speed under X. 

All X software with the features and complexity of WordPerfect for X Windows
will take that long to load.  Did you know that the current version of
Corel for X Windows takes a full 22 seconds to load????  Did you know that
that puts it more than DOUBLE the time of WP?????

And your complaint is only on the X version.  This does not hold water at
all on the text version......

> Also WP fails totally to
>understand how X and UNIX printspooling are supposed to work.  If you bring
>up a dialog box on the X version and then dismiss the box, it repaints the
>entire screen a couple of times rather than restoring the save-under
>region. 

Then you have the very first release of the software.  Those type of things
have been fixed in the 4/93 release which they will gladly give you for free
(although some of those things still remain).  This is WordPerfects **FIRST**
piece of X Windows software.  It is going to take some time to get it right.

> This is a dismal failure and really gets in the way of trying to
>use it.  Three of us here with a total of over 20 years of UNIX experience
>still cannot get WP to print to all of our lpd printers after dozens of
>hours of effort. 

We have over 40 printers in use with over 6 models.  We have never had ANY
printing problems.  (Use "Other Spooler", works just fine here for 1 year).

> That has been real productive.  I now have the port on all
>my printers set to disk.  At least I can print from the shell after I save
>them.

You are doing something wrong.

>The one thing that makes me support WP is that I can use it over a terminal
>and trade docs with the Windoze or DOS or VMeSs users.

There are SCORES of advantages to using WordPerfect besides that
The pricing is very reasonable compared to other packages.  They have many
versions for many platforms.  They include **BOTH** a text and X version
for Unix.  They support every printer on the planet.  It is a very
functional and robust wordprocessor.  They have very good technical support
(AND AT NO CHARGE). Etc....   My hat goes off to WordPerfect Corp. for being
a long-term supporter of Unix.  Their text version is EXTREMELY stable
and yes, they are having a few problems with their FIRST X piece of
software; of which 3/4 of the problems were corrected with the 4/93 release.

-- 
  /--------------------------------------------------------------------------\
  | Mark A. Davis    | Lake Taylor Hospital | Norfolk, VA (804)-461-5001x431 |
  | Sys.Administrator|  Computer Services   | [email-masked]   .uucp |
  \--------------------------------------------------------------------------/

------------------------------

From: [email-masked]
Subject: Read/Write CD drivers for Linux?
Date: 29 Sep 93 13:59:29 +0100

Hi, 

I'm haven't got a PC yet, but am thinking of doing so, in order to run Linux
and DOS and maybe NT too.

What I'd like to know, is are there any Linux drivers that support read/write
CDs? Can these CD rom drives read ordinary CDs (I think it sounds a silly
question, but you never know...). How does a read/write CD drive compare
in access time/transfer rate to a CD Rom drive?

[I'm thinking of using the CD drive to act as a backup store, rather than use
 a tape or Worm drive. Of course I'd also like to use the Cd drive to install
 Linux...]

Cheers for any answers.
-- 
[email-masked]  "If I were to read, much less to answer all the attacks made
on me, this shop might as well be closed for any other business. I do the very
best I know how - the very best I can; and I mean to keep doing so until the
end. If the end brings me out alright, what is said against me won't amount to
anything. If the end brings me out wrong, ten angels swearing I was right
would make no difference." [Abraham Lincoln, reported by Francis B Carpenter].

------------------------------

From: [email-masked] (Dr. John V. Jaskolski)
Subject: New 209 Meg Seagate Hard Drives $145.00 NICE PRICE
Reply-To: [email-masked]
Date: Wed, 29 Sep 1993 14:39:53 GMT

 I have a few *BRAND NEW* 209 Meg Seagate SCSI hard drives.  These
 drives went for $245.00 regularly.  I will give these 209 Meg drives
 away to anyone who wants one for $145.00 each.  Call me after 5:30 PM
 Eastern time if you want one.  I will give them out on a first come
 first serve basis and they will go fast.

 These are Seagate ST-2209N SCSI Hard Drives.  They were manufactured
 by SEAGATE TECHNOLOGY and are internal 5 1/4" Half Height Drives.  They
 are vastly superior to most of the non-SCSI hard drives out there.
 They will work with *ANY* SCSI controller.  They are brand new, still
 in the box, and come with  *EVERYTHING* including docs.  They are
 100% guaranteed for 30 days.  If you get one and you don't like the
 way it matches your wallpaper simply return it for your money back
 *NO QUESTIONS ASKED*!

 These drives also work perfectly with Linux, BSD, and other Unices for the PC.

 I can take Visa or MasterCard for these.  You can call any time after
 5:30 PM (and up until 2:00 AM) to order one.  My home phone number
 is (617) 246-3634.  If you think it is too late and they are already
 gone call anyway because your call will put you in line for one if I
 can get any more.  If nobody is home you can leave a message on our
 machine and I will call you within hours of your leaving a message.

 The cost is as follows:

 209 Meg Seagate Hard Drive               $145.00
 S&H                                      $ 10.00
 -----------------------------------------------------
 TOTAL                                    $155.00

 (This is the amount that would be charged to your credit card.)

 If you are going to pay with a check or money order:

 In order to acquire a Seagate make your payment or money order for $155.00
 payable to:

 Dr. John V. Jaskolski

 send it to:

 Dr. John V. Jaskolski
 Suite #307
 95 Audubon Rd.
 Wakefield, MA.
 01880

 E-MAIL me confirming exactly what you want and in what quantity and
 indicate how much money you sent in your payment.

 Sincerely,
 Dr. John V. Jaskolski
 [email-masked]

 P.S.  The Specs follow:

 Condition                         *BRAND NEW*
 Unformatted Capacity              209 Meg
 Formatted Capacity                179 Meg
 Average Access Time                14 ms
 Data Transfer Rate                2.75 Meg/SEC
 Form Factor:                       5 1/2" Half Height
 Buffer                            32Kbyte
                                    SCSI-I: Read Look-Ahead,
                                     Non-Adaptive, Single-Segmented
                                     Buffer.
                                    SCSI-II: Read Look-Ahead, Adaptive,
                                     Multi-Segmented Cache.
 MTBF (power-on hours)              100,000
 Average Sectors Per Track         45
 Tracks                            7720
 Cylinders                         1544
 Heads                             5
 Discs                             3
 Media Type                        Thin Film
 Spindle Speed                     3600
 TPI (Tracks Per Inch)             1280
 BPI (Bits Per Inch)               19213
 Single Track Seek                 4 ms
 Power Requirements                +12V Start-Up (amps) 4.0
                                    +12V Typical  (amps) 1.0
                                    +5V Start-Up (amps)  0.75
                                    +5V Typical (amps)   0.65
 Typical Watts                     16
 Maximum Watts                     58
 Landing Zone (cyl)                AUTO PARK

-- 
Sincerely,
Dr. John V. Jaskolski
[email-masked]

------------------------------

Crossposted-To: comp.os.linux.misc,comp.os.linux.help
From: [email-masked] (Rachid BELMOUHOUB <[email-masked]>)
Subject: WHERE IS THE FILE .Xresources In the SLS 1.03 
Date: Wed, 29 Sep 93 12:43:52 GMT

 Where can I find the file  .Xresources, that is named in the head of the file
 xnitrc to be at usr/lib/X11/xinit/.Xresources, I have search this file in this
 directory, and with find from / with no succes, when I run startx with the
 output file I have this message at the end of the output file:
 "xinit:  No such file or directory (errno 2):  unexpected signal 13"
 and suspect this file to be .Xresources.

 any help will be greatly apreciated

 Rachid

================================================================================
Rachid BELMOUHOUB ( rsm pour les amis )      E-mail:[email-masked]
Ecole des Mines de Paris
Centre d'Informatique Geologique

"si parvenir aupres de l'ami, est impossible. | "A Woman needs a man like 
L'autre ami se devra de mourir, le cherchant" |  fish needs a bicycle" U2  :-)
( Le Gulistan, Saadi poete et soufi Persan)   |

------------------------------

From: [email-masked] (Heinrich "Heiner" Hellmann)
Subject: Installing LINUX together with OS/2 and MSDOG
Date: 29 Sep 93 12:41:58 GMT
Reply-To: [email-masked] (Heinrich "Heiner" Hellmann)

Hi Netters ...
==============

A friend of mine doesn't have Internet access and asked me to post this
message (It's propably a FAQ - but I do not have the FAQ posting.)

I have only expirience with SV.x.x UNIX so I could not answer his question.

He wants to install the following OS software and doesn't want to boot
from a floppy:

- MSDOG 6.0 without compression
- IBM OS/2 2.1 with HPFS filesystem
- LINUX 1.02

Can anybody tell me in witch order he must install the OS's and which
partitions he has to set active so he can boot any of the 3 OS from HDD ???

Please E-Mail to my Mail-Plus address, because I do not read this newsgroup.
I will post a summary to this newsgroup, if there is interest.

Thanx in advance ...

+----------------------+------------------------------------------------+
|  __    __  __    __  | Heinrich Hellmann, UNIX System Administrator   |
| |__|  |__||__|  |__| +------------------------------------------------+
| |__|__|__||__|__|__| | Mail-Plus.: [email-masked] | 
| |__|__|__||__|__|__| | Internet..: [email-masked]         private |
| |__|  |__||__|  |__| | Subnet....: [email-masked]     private |
| |__|  |__||__|  |__| | CompuServe: 100111,[email-masked] private |
+----------------------+------------------------------------------------+
!!! Eat hot gamma rays, foolish DOS user !!!

-- 

------------------------------

** FOR YOUR REFERENCE **

The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:

    Internet: [email-masked]

You can send mail to the entire list (and comp.os.linux) via:

    Internet: [email-masked]

Linux may be obtained via one of these FTP sites:
    nic.funet.fi				pub/OS/Linux
    tsx-11.mit.edu				pub/linux
    tupac-amaru.informatik.rwth-aachen.de	pub/msdos/replace

The current version of Linux is 0.99pl9 released on April 23, 1993

End of Linux-Activists Digest
******************************