Subject: Linux-Admin Digest #101
From: Digestifier <[email-masked]>
To: [email-masked]
Date: Sat, 24 Sep 94 18:14:26 EDT

Linux-Admin Digest #101, Volume #2               Sat, 24 Sep 94 18:14:26 EDT

Contents:
  Linux won't keep correct time (Tobias S. Keidl)
  Re: 4mm DAT on Linux? (Dan Halverson)
  Re: DOMM 4 Linux /X is OUT !!! (Mark Krischer)
  DOOM DOOM DOOM DUMB DUMB DUMB! (Mark A. Horton KA4YBR)
  Deskjets and Ghostscript? (Benjamin John Walter)
  Re: apsfilter won't print (Egbert Hinzen)
  routing between ethernet and ppp? (Daniel Garcia)
  Re: XFree86 3.x (jon m)
  Xfree86 Config Prob. (Joseph Weiner)
  Reinstallation (Nate Hill)
  Re: NFS Bootdisk? (William B. Cattell)
  Jumbo250MB speed improvement ([email-masked])
  Re: Linux DOOM: Congrats IDsoftware (Andrew Robert Ellsworth)
  Re: Reinstallation (Timothy Murphy)
  Networking Problems (Still) (Charles William Binko)
  Re: Printers on the parallel port (H. Peter Anvin)
  Re: PPP does not work (Andrew Kurtz)
  Re: Mosaic-2.4 on Linux - what to do with Motif? (Thomas Quinot)
  Re: XFree86 3.x (Thomas Quinot)
  Re: /dev/audio: No such file or directory (Thomas Quinot)
  Re: Laserjet doesn't go online (Thomas Quinot)

----------------------------------------------------------------------------

From: [email-masked] (Tobias S. Keidl)
Subject: Linux won't keep correct time
Date: 23 Sep 1994 06:36:18 GMT

It seems that every time I boot up my Linux box, the clock always is 1
hour behind what it should be.  Any time I reset the time, it changes
the next time I reboot.  I presume there is some config file somewhere
telling it to do that but I have no idea where or what (and it was also
exhibiting the same behavior before I was networked).  Anyone have any
solutions or suggestions?  I'd appreciate them!
-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
   [email-masked]                              Tobias S. Keidl
   [email-masked]                    Physics/Astronomy
                                                Northwestern University

------------------------------

From: [email-masked] (Dan Halverson)
Crossposted-To: utah.linux
Subject: Re: 4mm DAT on Linux?
Date: 23 Sep 1994 01:39:56 -0500

Pete Kruckenberg ([email-masked]) wrote:
: I've heard that Linux will support 8mm DAT and a lot of other tape
: drives, but I've never heard about 4mm DATs. Does anyone know if they
: are supported under Linux, and if so, which brands/models? I'd prefer
: SCSI, but if there is an floppy-controlled (or proprietary controller)
: one that works with Linux, let me know. I'm assuming that a 4mm SCSI
: DAT would be supported with the regular SCSI tape driver, so please
: let me know if I'm right or wrong.

Well, I have a Archive 8 GIG 4mm DAT drive in my machine running off of a 
sound-blaster SCSI card along with a 1.7 Gig SCSI HD, and a NEC 3XI 
CD-ROM.  I have cron backing up the complete drives (SCSI and 211 Meg 
IDE) every night.  I get backup speeds of about 25 Megs a minute, and 
compare times of about 36-39 megs a minute.  Overall, I have to say I 
love the drive.  I think it is MUCH more reliable than the Exabyte drives 
I have worked with before.  Also a lot cheaper.  E-Mail me if you need 
any more information

Happy Linux'ing

        Dan

------------------------------

From: [email-masked] (Mark Krischer)
Subject: Re: DOMM 4 Linux /X is OUT !!!
Date: 13 Sep 1994 23:50:11 GMT

In article <[email-masked]>, [email-masked] (RYAN  Colin Patrick) writes:
|> in the smallest window it isn't quite right for me. When the window is active
|> Doom is GREAT! but the background is black except for traces of the window title
|> bares. When the other windows are active, they are fine, but DOOM is blacke!!
|> 
|> What's up. I havnt' seen anyone else see this prob..
|> 
|> Thanks......Colin [email-masked]

it might be that doom sucks the whole color palette or something like that
mark

------------------------------

From: [email-masked] (Mark A. Horton KA4YBR)
Subject: DOOM DOOM DOOM DUMB DUMB DUMB!
Date: Sat, 24 Sep 1994 13:52:17 GMT

                mount -r -t raving.human /dev/keyboard /soapbox

Do we have to have all this crap about a GAME cluttering up every single Linux
group?  I fail to see the relevance to c.o.l.admin, c.o.l.development,
c.o.l.a, etc.  It's a GAME, guys... NOT part of the OS!  If that's the most 
important thing you do with Linux, I respectfully submit that you are
wasting a lot of money on a microcomputer... just go out and buy a Nintendo...
you'd probably be happier.

                                umount /soapbox

        - Mark

--
"Linux!     Guerrilla UNIX Development     Venimus, Vidimus, Dolavimus."
============================================================
Mark A. Horton       ka4ybr             [email-masked]
P.O. Box 747 Decatur GA US 30031-0747         [email-masked]
+1.404.371.0291                     33 45 31 N / 084 16 59 W

------------------------------

Crossposted-To: comp.os.linux.help
From: [email-masked] (Benjamin John Walter)
Subject: Deskjets and Ghostscript?
Date: Sat, 24 Sep 1994 15:49:39 +0000

Hi,

   I'm trying to use ghostscript so that my humble DeskJet 500 can
emulate a spiffy PostScript printer.  I'm invoking gs like this:

gs -dNOPAUSE -sDEVICE=deskjet -sPAPERSIZE=a4 -r300 -sOutputFile=/dev/lp1 -

  The output is at the end of this posting.  What I'm really trying to
do is make it so that I can print out *NICE* documents on my deskjet.
I want to change the font & font size so that I can fit more on one
page then in the standard 12pt (10pt?) courier.  I'd also like to
print more than one 'page' on each physical page.   Does anyone
have any suggestions?

peace,  Ben

ps  here is the gs output:

Initializing... done.
Ghostscript 2.6.1 (5/28/93)
Copyright (C) 1990-1993 Aladdin Enterprises, Menlo Park, CA.
  All rights reserved.
Ghostscript comes with NO WARRANTY: see the file COPYING for details.
Loading Courier font from /usr/lib/ghostscript/fonts/ncrr.gsf... 239192 237077 0 done.
Loading Times-Bold font from /usr/lib/ghostscript/fonts/ptmb.gsf... 299192 278550 0 done.
Error: /invalidfileaccess in --.outputpage--
Operand stack:
    1  true
Execution stack:
    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  --nostringval--  --nostringval--
Dictionary stack:
    532/547  0/20  11/200
Current file position is 20948

-- 
   __   _                
  / /  (_)__  __ ____  __
 / /__/ / _ \/ // /\ \/ /  . . .  t h e   c h o i c e   o f   a
/____/_/_//_/\_,_/ /_/\_\              G N U   g e n e r a t i o n . . .

------------------------------

From: [email-masked] (Egbert Hinzen)
Subject: Re: apsfilter won't print
Date: Tue, 20 Sep 1994 09:54:07 GMT

I'm sorry to tell that my apsfilter-3.0 don't print, too, although I use a
postcript printer...

--
Egbert Hinzen ...speaking for himself... 
Email: [email-masked] (preferred) *** [email-masked]

------------------------------

From: [email-masked] (Daniel Garcia)
Crossposted-To: comp.os.linux.help
Subject: routing between ethernet and ppp?
Date: 24 Sep 1994 15:22:14 -0400
Reply-To: [email-masked]

Ok, I've kind of seen it discussed here, but still don't understand it.
My service provider has given me three ip numbers, and I have three
machines on a local, private ethernet (two linux boxes and an alpha).  
One of the linux boxes is connected via ppp to my service provider, and
by extension the rest of the internet.  The other two machines can connect
to my linux box, but thye can't get out to the internet.  What is the
easiest way to get my machine to act as a router?  

Kernel routing table
Destination     Gateway         Genmask         Flags Metric Ref Use    Iface
192.215.98.2    0.0.0.0         255.255.255.255 UH    0      0       74 ppp0
192.215.98.0    0.0.0.0         255.255.255.0   U     0      0     5689 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.215.98.2    0.0.0.0         UG    0      0     8352 ppp0

192.215.98.2 is the service provider.  Email responses preferred, but I do read 
this newsgroup quite regularly.  Thanks in advnace!

D

-- 
   ___________________________________________________________________________
  /Daniel Garcia/Soon to be PhD Student/[email-masked]/[email-masked] /
 /Linux  Hacker/C Programmer for Hire /#include <disclaimer>/The Answer's 42/|
,-------------+----------------------+---------------------+-------------- + |
| I'll lift you up and hold you here, warm your heart and calm your fears, | /
| I don't wanna lose this love i found, so i burn my bridges burn them down|/
`--------------------------------------------------------------------------'

------------------------------

Subject: Re: XFree86 3.x
From: [email-masked] (jon m)
Date: 22 Sep 94 11:31:14 -0500

In article <[email-masked]>, Andrew Sawczyn <[email-masked]> wrote:
>It's been a couple of months now that Xfree86 3.0 has been out for the 
>majority of unix's and I was wondering what the hold up is for the Linux 
>version....  Does anyone out there have any information that they can 

XFree86 3.0's been out for Linux too; i've been using it for a coupla
months now.

you probably mean an "official" release.  yes, 3.0's beta. 3.1 will
be the "real" thing.

you have XFree 2.1.1.  i promise, there's no big difference.  the biggest
difference to me will be LBX, which means i can run stuff at a pretty
good speed via a PPP modem link.  

actually, there's no noticible difference at all, 'cept it's less
flexible (no linkkit, so i can't get a smaller binary. )

>Andrew Sawczyn
>[email-masked]
>[email-masked]

jonM
-- 
jon madison
oit consultant in training

------------------------------

From: [email-masked] (Joseph Weiner)
Subject: Xfree86 Config Prob.
Date: Thu, 22 Sep 1994 23:07:49 GMT

I have a problem when I run ConfigXF86 to configure Xfree86
for Slackware. I seem to be able to configure ok for my ATI
graphics ultra and Viewsonic 7 monitor but when I run Tune
then I have some trouble.It tells me something about flickering
and then when I tell it to proceed I see some error msgs flash
up which are then erased as the screen is cleared. It tries to tell
me what modes are available but gives a msg something like ,"
cat /tmp/1541.tmm no such file or directory" I should mention
that after installing Linux I then added one user w/associated
home directory. I ran the config script from the user login. 
I did not mark any particular directories as readable by that user.
   I also tried modifying the config script so that it would run
from the root login but I did not get any further than from
my user login.
   My Xfree installation did not have any problems that I know
of. I chose mach8 as the shell for my graphics ultra.
   Any ideas?
   Thanks,
   Joe

------------------------------

From: [email-masked] (Nate Hill)
Subject: Reinstallation
Date: 24 Sep 1994 20:48:03 GMT

        I want to install the new slackware, but I don't want to start over
again from nothing.  I installed the slack that was out in late august, so
my setup isn't that old.  I would like to know if it's possible to just
install the new stuff overtop of the old.  I only want to reinstall disk
sets a d and n.  

Thanks,
  Nate Hill

------------------------------

From: [email-masked] (William B. Cattell)
Subject: Re: NFS Bootdisk?
Date: Sat, 24 Sep 1994 20:11:01 GMT

Ralf Sagorny-Schwarz ([email-masked]) wrote:
: Hello!
: Iam working with linux. My second PC is only running DOS. Therefore I want to
: boot a kernel from disk and mount the rest with NFS to use the power of this
: PC under Linux. Has anyone done this before?
: What I have to do and what has to be on the disk?

: Ralf

I just completed that very task.  There is a kernel image called SCSI-NET 
that has several network card drivers built into it.  I was able to boot 
a DOS based 386-25 with a 3Com 3C509 and was able to install via NFS from 
a 486-33 running Linux (1.1.47, 3.016 net code).

The first few steps for creating the partition, formatting the drive etc 
are the same as a normal install.  When you get to the "select source" 
choose NFS.  SETUP then asks for your IP, mask, gateway (I didn't use 
one), NFS host, net and broadcast addresses.  You will have to exec the 
portmap utility BEFORE you run setup.  There was a screen that popped up 
that mentioned several steps that had to performed before SETUP was started.

This install was done with the InfoMagic June '94 release using Slakware 2.0.

Hope this helps...

Bill Cattell

------------------------------

From: [email-masked]
Subject: Jumbo250MB speed improvement
Date: 24 Sep 1994 17:28:10 -0400
Reply-To: [email-masked]

Date: Sat, 24 Sep 1994 17:52:55 +0000
From: Andre Couture <[email-masked]>
Subject: Jumbo250MB speed improvement
To: "comp.os.linux.admin" <[email-masked]>, 
    "comp.os.linux.help" <[email-masked]>, 
    "comp.os.linux.development" <[email-masked]>
Message-ID: <Pine.3.89.9409241701.A4136-0100000@cyborg>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I was wondering howto improve the transfert speed to/from my tape backup.
I need to backup the server and a notebook.

I consider buying one of the adapter card from colorado.

Is it worthed and supported under linux? (I know somes are)
Do Linux support hardware compression?

Here is my system configuration:
486DX50 EISA w/20MB RAM
Adaptec 1742A
Quantum 525LPS HDD
NEC CDR84J cdrom
ATIXL w/mouse w/o monitor! (long story...)
Colorado jumbo250MB (of course!)

Talking about 'no monitor', is there somebody working on a 'something' 
that would permit me (or anybody) to read tapes mades with TAPE.EXE or 
CBWLITE.EXE with and without compression.

I need something that would be available thru the lan.

I was thinking also at the dosemu and wine but none of them seem to allow 
me to access my tape drive.

any suggestion accepted.

=====
Andre Couture,
[email-masked] (prefered)
     _/_/_/_/  _/_/_/_/  _/_/_/_/         Centre Informatique Couture
    _/           _/     _/         938934 Ontario Inc.  Phone:

+1-613-762-0262
   _/           _/     _/          155 Queen St.        FAX:  
+1-819-775-9697
  _/           _/     _/           Suite 900            Roma: 
+39/6-5125-745
 _/           _/     _/            Ottawa, Ontario      Delphi:    
CoutureA
_/_/_/_/. _/_/_/_/. _/_/_/_/.

@receiver file

------------------------------

From: [email-masked] (Andrew Robert Ellsworth)
Subject: Re: Linux DOOM: Congrats IDsoftware
Date: 24 Sep 1994 12:27:33 -0500

In article <[email-masked]>,
Robert J. Shmit <[email-masked]> wrote:
>Harry C Pulley ([email-masked]) wrote:
>: Get the doom_16to8bit_snd.tgz (there is also a version 2 of this file that I
>: haven't tried out yet) file.  It allows me to play music through my 8-bit
>: card.
>
>linuxxdoom plays MUSIC? what patch do i need? where do i get it? who can i
>kill for it??? :)

Be careful to differentiate between "music" and "sound"; i.e. adrenalin-
pumping music vs. the wonderful sound of an imp's guts falling to the floor
as he gets nailed by the blast of a rocket launcher.  Unless ID cranked out
another release, I believe linuxxdoom only supports sound, NOT music (at least
that's all I've been able to get out of it with my 8-bit SBPro and the 16-to-8
thing).

Andy Ellsworth
[email-masked]

==============================================================================
"Atlas does no work holding up the earth because he's not moving the earth."

------------------------------

From: [email-masked] (Timothy Murphy)
Subject: Re: Reinstallation
Date: 24 Sep 1994 22:26:40 +0100

[email-masked] (Nate Hill) writes:

>       I want to install the new slackware, but I don't want to start over
>again from nothing.  I installed the slack that was out in late august, so
>my setup isn't that old.  I would like to know if it's possible to just
>install the new stuff overtop of the old.  I only want to reinstall disk
>sets a d and n.  

There is a removepkg command, if you want to be sure.
It's a bit painful, as you have to list all the packages (.tgz files)
you want to remove.

-- 
Timothy Murphy  
e-mail: [email-masked]
tel: +353-1-2842366
s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland

------------------------------

From: [email-masked] (Charles William Binko)
Subject: Networking Problems (Still)
Date: 24 Sep 1994 21:03:36 GMT

Hello Again.

I am still having alot of problems with my slip connection working right.
Actually, as I said in a previous post (and thanks to those who responded),
I think it is only one problem: I can't see myself!  

Before I start, here is the setup:
Linux ver. 1.0.9 (from the SW CD)
dip ver. 3.3.7-uri (24 May 94)
connecting to the UF Annex (running SunOs but thats not the problem)

When I first start up the machine (actually, before I dial in) I can do a 
'ping localhost' and I get all of my stats no problem.  I can also do an
'rlogin localhost' with no problems.

However, once I slip in to the University, any attempt to ping or
login yeilds:

PING localhost (127.0.0.1): 56 data bytes
ping: sendto: Network is unreachable
ping: wrote localhost 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote localhost 64 chars, ret=-1

--- localhost ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss

and localhost: Network is unreachable, respectively.

ifconfig yeilds:
lo        Link encap Local Loopback  
          inet addr 127.0.0.1  Bcast 127.255.255.255  Mask 255.0.0.0
          UP LOOPBACK RUNNING  MTU 2000  Metric 1
          RX packets 0 errors 0 dropped 0 overruns 0
          TX packets 1198 errors 0 dropped 0 overruns 0

sl0       Link encap UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr 128.227.224.205  P-t-P 128.227.224.94  Mask 255.255.255.0
          UP BROADCAST POINTOPOINT RUNNING  MTU 1006  Metric 1
          RX packets 4225 errors 0 dropped 0 overruns 3585
          TX packets 6779 errors 0 dropped 33 overruns 5629

(The low MTU for slip is normal (UF requires it))

route yields: 
Kernel routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
annex-b         *               255.255.255.255 UH    0      0        0 sl0
127.0.0.0       *               255.0.0.0       U     0      0     1199 lo
default         annex-b         *               UG    0      0     5987 sl0

I have 127.0.0.1 in hosts as localhost

WHAT IS WRONG???

Thanks
Charles

_____________________________________________________
Charles W. Binko                All Statements are
[email-masked]            My own and DEFINITELY
[email-masked]          do not represent 
[email-masked]      those of UF     
_____________________________________________________

------------------------------

Crossposted-To: comp.os.linux.help
From: [email-masked] (H. Peter Anvin)
Subject: Re: Printers on the parallel port
Reply-To: [email-masked] (H. Peter Anvin)
Date: Sat, 24 Sep 1994 20:52:18 GMT

Followup to:  <[email-masked]>
By author:    [email-masked] (Stephen E. Farlow)
In newsgroup: comp.os.linux.admin
> 
> : LPT1 in DOS is /dev/lp0 under Linux.... 
> 
> *****************************************************************
> WRONG!!! A laser printer in Linux is /dev/lp1 !!! Becareful here!
> *****************************************************************

Wrong again.

The confusion relates to the fact that DOS, unlike Linux, assigns
device names dynamically.  There are three standard addresses for the
printer ports: 0x3bc, 0x378 and 0x278.  If you have all three, they
are LPT1, LPT2 and LPT3 under DOS and lp0, lp1 and lp2 under Linux.
However, many systems ship with the first printer port on 0x378.  If
you have 0x378 and 0x278, they are LPT1 and LPT2 under DOS, but still
lp1 and lp2 under Linux.

Hence, LPT1 can be either lp0 or lp1 under Linux, depending on how
your system is configured.

        /hpa
-- 
INTERNET: [email-masked]             --- Allah'u'abha ---
IBM MAIL: I0050052 at IBMMAIL     HAM RADIO:   N9ITP or SM4TKN
FIDONET:  1:115/511 or 1:115/512  STORMNET:    181:294/1 or 181:294/101
"We are receiving two hundred and eighty-five thousand hails." -- Lt. Crusher

------------------------------

From: [email-masked] (Andrew Kurtz)
Subject: Re: PPP does not work
Date: 24 Sep 1994 17:46:48 GMT

[email-masked] (Yue-mingLan) wrote:
: Dear netters,

: Could anybody out there can tell me how to make my PPP work.
: I tried to use ppp-on script comes with Slackware 2.0 with
: device name modified. But it still does not work at all.

: I would like to learn more about pppd and chat commands. What does 
: the lock file mean ?

: Any information welcome. 

: My e-mail address: [email-masked]

: Thanks in advance.

: Lan

I have Slackware 2.0 and was also unable to get PPP to work.  I have
heard that the version of PPP in Slackware 2.0 will not work.  I got a
new version of PPP from sunsite and installed that and it worked fine.

The installation I did was to compile chat and pppd and put the ppp.c
and ppp.h files into the kernel source and recompile the kernel.

Andy.
[email-masked]

------------------------------

From: [email-masked] (Thomas Quinot)
Subject: Re: Mosaic-2.4 on Linux - what to do with Motif?
Date: 23 Sep 1994 16:46:00 +0200

Le Prostetnic Vogon Dirk Keunecke écrit :
 
> Err.., my Mosaic runs without any Motif (shouldn't it ?). OK, i don't have BUILD
> it from the sources. I got the compiled stuff from a ftp-server in Germany

The binary you downloaded has Motif libraries statically linked in it. You
have to purchase Motif if you want either to rebuild it from the source or
to run a shared-lib (thus smaller) version of the executable.

-- 
Thomas QUINOT                       |  "Un roi sans divertissement est un
<[email-masked]>      |             homme plein de misère."
Linux - choice of a GNU generation  |                          Jean GIONO

------------------------------

From: [email-masked] (Thomas Quinot)
Subject: Re: XFree86 3.x
Date: 23 Sep 1994 16:50:42 +0200

Le Prostetnic Vogon Steve DuChene écrit :
 
>       Request for info about Xfree86-3.0 deleted...

 (XF 3.0 has been available for > 2 months already)

>       OS/2-3.0 isn't out yet either is it? :-)   The official release
>       of XFree86-3.1 was supposed to be the end of Sept. so I would
>       be patient just a little longer.

Wise decision : the developers themselves stated that XFree86 3.0 for Linux
was so "pre-release"ish that for vanilla use your best bet was to keep
the 2.1* version till 3.1 comes out.
-- 
Thomas QUINOT                       |  "Un roi sans divertissement est un
<[email-masked]>      |             homme plein de misère."
Linux - choice of a GNU generation  |                          Jean GIONO

------------------------------

From: [email-masked] (Thomas Quinot)
Subject: Re: /dev/audio: No such file or directory
Date: 23 Sep 1994 17:02:48 +0200

Le Prostetnic Vogon G Cheng écrit :
 
> Though I am a newbie but I still looked at snd-driv-2.5 and got no clue..

This is completely obsolete. The current VoxWare sound driver is included
in the standard kernel source tree. It has a README in it that should
enlight you about Sound and Linux :-)
-- 
Thomas QUINOT                       |  "Un roi sans divertissement est un
<[email-masked]>      |             homme plein de misère."
Linux - choice of a GNU generation  |                          Jean GIONO

------------------------------

From: [email-masked] (Thomas Quinot)
Crossposted-To: comp.os.linux.help
Subject: Re: Laserjet doesn't go online
Date: 23 Sep 1994 17:05:50 +0200

Le Prostetnic Vogon Maxim Spivak écrit :
 
> I have a HP LaserJet II connected to my Linux box. If I turn on my 
> printer at computer start-up, before the Linux kernel loads, everything 
> is fine: lpr prints, ghostscript does its job, etc. However, if I turn on 
> my printer when Linux is already running, it doesn't go online. It's as 

This is no real solution, but you may try to kill lpd and restart it after
you've powered your printer up. Works here, anyway (I suspect lpd fails to
work correctly if the printer is not online when it starts up, but I've
had no time to find out the problem precisely. It seems that /tmp/.printer
sometimes disappears, but I'm not sure...)

Hope this helps :-)
-- 
Thomas QUINOT                       |  "Un roi sans divertissement est un
<[email-masked]>      |             homme plein de misère."
Linux - choice of a GNU generation  |                          Jean GIONO

------------------------------

** FOR YOUR REFERENCE **

The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:

    Internet: [email-masked]

You can send mail to the entire list (and comp.os.linux.admin) via:

    Internet: [email-masked]

Linux may be obtained via one of these FTP sites:
    nic.funet.fi				pub/OS/Linux
    tsx-11.mit.edu				pub/linux
    sunsite.unc.edu				pub/Linux

End of Linux-Admin Digest
******************************