Subject: Aegis Frequently Asked	Questions (FAQ)
From: Peter Miller <millerp@canb.auug.org.au>
Newsgroups: comp.software-eng,comp.software.config-mgmt,
	comp.software.testing,comp.sources.d,alt.sources.d

Submitted-by: Peter Miller <millerp@canb.auug.org.au>
Archive-name: aegis.4/FAQ

This message contains answers to a number of frequently	asked
questions about	Aegis.	If you don't know what Aegis is, read on.

Suggestions for	additions or improvements to this FAQ are most
welcome.

			       Contents
1.   What is Aegis?
1.1.   What operating systems are supported?
1.1.1.	 Cygwin
1.1.2.	 Windows NT
1.2.   Where can I get Aegis?
1.3.   Is Aegis	actively being maintained?
1.4.   Is there	an Aegis mailing list?
1.5.   How does	Aegis compare with program X?
2.   Configuration and initial build problems
2.1.   Changing	Makefile and common/config.h
2.2.   RCS
2.3.   SCCS
3.   Testing
3.1.   Can I use something besides a shell script?
3.2.   Testing curses programs
3.2.1.	 Expect
3.3.   Testing X11 programs
3.3.1.	 replayXt
3.4.   Testing embedded	systems
3.5.   Do I really need	to test	my software?
4.   Miscellaneous
4.1.   How do you pronounce ``Aegis''?
4.2.   How do I	automate the integration queue?
4.3.   How do I	enforce	coding standards?
4.4.   How do I	get dates printed before and after build commands?
4.5.   How do I	stop Aegis automatically merging?
4.6.   How do I	modify which developer is assigned to a	change?
4.7.   Do I have to type all the configuration examples	in the User Guide?
4.8.   Is there	a way to recreate a previous baseline?
4.9.   How do I	stop it	using the pager?
4.10.	Why does develop end complain about builds?
4.10.1.	  Build	Time Stamps
4.10.2.	  Build	Architectures
5.   Internationalization
5.1.   Say What?
5.2.   So why are the error messages So	Bad, now?
5.3.   What controls which language is used?
5.4.   What localizations are available?
5.5.   So can I	change the text	of error messages?
6.   Branches
6.1.   What is a Branch?
6.2.   What is an Anabranch?
6.3.   Do branches have	to end?
6.4.   Why are branches	called projects?
6.5.   Why must	aed be used when integrating a branch?
6.6.   How come	the branch baseline is incomplete?

----------------------------------------------------------------------

Subject: 1.  What is Aegis?

Aegis is a transaction-based software configuration management system.
It provides a framework	within which a team of developers may work on
many changes to	a program independently, and Aegis coordinates
integrating these changes back into the	master source of the program,
with as	little disruption as possible.

For a more complete description, see the README	file or	the User
Guide.	Both are available from	the anonymous FTP site (see below).

------------------------------

Subject: 1.1.  What operating systems are supported?

Aegis will run on almost any version of	UNIX.  The distribution
contains a configure script generate by	GNU autoconf to	adapt to your
site.

There is no Aegis port to NT, OS/2, MS-DOS or VMS.  The	author has no
expertise is these operating systems.  If you do have such expertise,
you are	welcome	to donate a port of Aegis, and I will try to include
your work in the next release.

------------------------------

Subject: 1.1.1.	 Cygwin

There is a very	capable	UNIX emulation layer known as Cygwin available
from Cygnus.  Please see http://sourceware.cygnus.com/cygwin/ for more
information.  But before you get too excited, see the next item.

------------------------------

Subject: 1.1.2.	 Windows NT

Aegis depends on the underlying	security provided by the operating
system (rather than re-invent yet another security mechanism).
However, in order to do	this, Aegis uses the POSIX seteuid system
call, which has	no direct equivalent on	Windows	NT.  This makes
porting	difficult.  Single-user	ports are possible (e.g. using
Cygwin), but are not usually what folks	want.

Compounding this is the	fact that many sites want to develop their
software for both Unix and Windows NT simultaneously.  This means that
the security of	the repository needs to	be guaranteed to be handled in
the same way by	both operating systems,	otherwise one can act as a
``back door'' into the repository.  Many sites do not have the same
users and permissions (sourced from the	same network register of
users) on both Unix and	Windows	NT, making the mapping almost
impossible even	if the security	models did actually correspond.

Most sites using Aegis and Windows NT together do so by	running	Aegis
on the Unix systems, but building and testing on the NT	systems.  The
work areas and repository are accessed via Samba or NFS.

------------------------------

Subject: 1.2.  Where can I get Aegis?

Aegis is available by WWW from
    URL:    http://aegis.sourceforge.net/
    File:   aegis.4.README   # the README file from the	tar set
    File:   aegis.4.faq	     # Frequently Asked	Questions
    File:   aegis.4.lsm	     # description in LSM format
    File:   aegis.4.rm.pdf   # PDF of the Reference Manual

    File:   aegis.4.tar.gz   # the complete source
    File:   aegis.4.ug.pdf   # PDF of the User Guide

------------------------------

Subject: 1.3.  Is Aegis	actively being maintained?

Yes, Aegis is actively being maintained	by the author.	You can
contact	him by email
	       Peter Miller <millerp@canb.auug.org.au>

------------------------------

Subject: 1.4.  Is there	an Aegis mailing list?

Yes.  Discussion may include, but is not limited to: bugs,
enhancements, and applications.	 The list is not moderated.

The address of the mailing list	is
	aegis-users@canb.auug.org.au

DO NOT send email to the list if you wish to subscribe.

To subscribe to	this mailing list, send	an email message to
majordomo@canb.auug.org.au with	a message body containing the single
line
	subscribe aegis-users
If you have an address which is	not readily derived from your mail
headers	(majordomo is only a Perl program, after all) you will need to
use a message of the form:
	subscribe aegis-users address
where address is an email address to which you want messages sent.

The mailing list is archived at	eGroups.  The URL is
http://www.egroups.com/list/aegis-users/info.html and then follow the
links.

The software which handles this	mailing	list CANNOT send you a copy of
Aegis.	Please use FTP or ftp-by-email,	instead.

------------------------------

Subject: 1.5.  How does	Aegis compare with program X?

For all	X, ``The author	has no experience with X.  If you wish to
contribute a comparison	between	Aegis and X, it	will be	considered for
addition here.''

------------------------------

Subject: 2.  Configuration and initial build problems

Aegis is accompanied by	a set of regression tests, and the BUILDING
instructions included in the distribution detail how to	run these
tests.

------------------------------

Subject: 2.1.  Changing	Makefile and common/config.h

It is a	Bad Idea to change the Makefile	or the common/config.h file by
hand.  This is because much of the work	done by	the configure script
is inter-related.

In particular, if you change the C compiler (CC) you absolutely	must
do this	with the involvement of	the configure script.

------------------------------

Subject: 2.2.  RCS

The tests distributed with Aegis use RCS as their history tool.	 It is
important that you use version 5.6 or later.

There seems to be a problem with the version of	RCS distributed	with
HP/UX, even though it claims to	be RCS-5.6.0.1.	 You will need to get
the latest GNU RCS if you are on a HP box.

------------------------------

Subject: 2.3.  SCCS

The tests do not automatically detect that you have SCCS.  You will
need to	go out and grab	RCS even if you	already	have SCCS installed at
your site.

------------------------------

Subject: 3.  Testing

One of the things many sites like about	Aegis, is that it provides
mandatory testing.  This enforcement of	testing	is optional, and is
configurable per-project.

Please note that even if Aegis'	testing	framework is not useful	to
your project, the other	aspects	of Aegis' process still	are (e.g.
concurrent development,	mandatory reviews, etc.).

------------------------------

Subject: 3.1.  Can I use something besides a shell script?

Yes, the ``test_command'' field	of the project configuration file may
be set to whatever command you like, see aepconf(5) for	more
information.

A shell	script is the default, because you can run anything out	of the
shell script.  In particular, you can set up a temporary directory
within which to	run the	tests.	If you ``cd'' into this	temporary
directory when running tests, cleanup, no matter what the fallout,
even a core dump, is thus a simple matter of ``rm -rf''	of the
temporary directory.

------------------------------

Subject: 3.2.  Testing curses programs

I don't	have a curses program tester, nor do I know of one.  It	seems
to me that the ``screen'' program contains all the necessary elements,
however	additional code	would be required to make it a suitable	test
harness.

If anyone has found suitable curses testers, even commercial ones, I
would be happy to list (FTP) locations here.

------------------------------

Subject: 3.2.1.	 Expect

Some sites have	been using ``expect'' to test curses programs.	You
need to	be careful about terminal types.  The author is	Don Libes
<libes@nist.gov>

expect is available by anonymous FTP from
    Host:   sunsite.unc.edu
    Dir:    pub/Linux/system/Shells
    File:   expect-5.12.tgz

The author has not personally used this	system,	and so can make	no
comment	on it.

------------------------------

Subject: 3.3.  Testing X11 programs

I don't	have an	X11 program tester, however several commercial ones
seem to	be advertised heavily.

If anyone has found suitable X11 testers, even commercial ones,	I
would be happy to list additional (FTP)	locations here.

------------------------------

Subject: 3.3.1.	 replayXt

ReplayXt is a library that allows Intrinsics (or Xt) based application
to be executed from a script file.  In particular, applications	based
on the Athena and the Motif toolkits can be played.  The author	is Jan
Newmarch <jan@pandonia.canberra.edu.au>

replayXt is available by anonymous FTP from
    Host:   ftp.x.org
    Dir:    /contrib/devel_tools
    File:   replayXt.README
    File:   replayXt.1.1.tar.z

The author has not personally used this	system,	and so can make	no
comment	on it.	This entry originated from Simon Pickup
<simon@adacel.com.au>

------------------------------

Subject: 3.4.  Testing embedded	systems

Yes, embedded system can be developed with Aegis.  Naturally, you will
need a suitable	cross compiler.

To test	embedded software, you will need suitable testing hardware:

1. you will need to be able to (automatically) download	the software
into suitable hardware - probably with RAM emulating the ROM of	the
distributed product.

2. you will need to be able to simulate	the various inputs and capture
the various outputs, if	you don't want to do manual testing.

3. you will probably have to write the testing program yourself, to
allow scripting	the inputs and outputs.

4. The gotcha is that in diverting input and output, you will need to
manually test the device drivers, because the tests will probably not
exercise them.

The author has worked in an environment	like this, and Aegis is
definitely intended to be useful in this situation.

------------------------------

Subject: 3.5.  Do I really need	to test	my software?

No, you	do not.	 There are alternatives, as this quote demonstrates:

    New	York, NJ, Sept.	24 -- People for the Ethical Treatment of
    Software (PETS) announced today that seven more software companies
    have been added to the group's "watch list"	of companies that
    regularly practice software	testing.

    "There is no need for software to be mistreated in this way	so
    that companies like	these can market new products,"	said Ken
    Granola, spokesperson for PETS.  "Alternative methods of testing
    these products are available."

    According to PETS, these companies force software to undergo
    lengthly and arduous tests,	often without rest for hours or	days
    at a time.	Employees are assigned to "break" the software by any
    means necessary, and inside	sources	report that they often joke
    about "torturing" the software.

    "It's no joke," said Granola.  "Innocent programs, from the	day
    they are compiled, are cooped up in	tiny rooms and 'crashed' for
    hours on end.  They	spend their whole lives	on dirty, ill-
    maintained computers, and are unceremoniously deleted when they're
    not	needed anymore."

    Granola said the software is kept in unsanitary conditions and is
    infested with bugs.

    "We	know alternatives to this horror exist," he said, citing
    industry giant Microsoft Corp. as a	company	that has become
    extremely successful without resorting to software testing.

If anyone has an accurate attribution for the above quote, I would
like to	include	it here.

------------------------------

Subject: 4.  Miscellaneous

This section contains a	whole bunch of things which do not yet belong
anywhere else.

------------------------------

Subject: 4.1.  How do you pronounce ``Aegis''?

There are many alternatives for	pronouncing this word, and all focus
on the myriad of sounds	available for the "ae" vowel.  Alternatives
include: maestro, aerial, algae, etc.  The author has chosen the
pronunciation found in the majority of dictionaries: ee.j.iz.  That is
"ee" as	in "tree", a "j" as in "job", and "iz" as in "prism".

------------------------------

Subject: 4.2.  How do I	automate the integration queue?

There is a Perl	script distributed with	Aegis called aeintegratq(1)
which can be run from cron(1) daily, or	whatever.  This	Perl script is
a good starting	point for customizing automatic	integrations.

Please note that the integration phase also serves to answer the
question ``who reviews the reviewers?''	 Monitoring review quality is
essential to maintain product quality.	Automating the integration
queue potentially denies you this quality opportunity.

------------------------------

Subject: 4.3.  How do I	enforce	coding standards?

The ``diff_command'' field of the project configuration	file need not
only difference	the file, it can also be overloaded to do other
things.	 If the	difference command fails for any source	file, the
change may not leave the being developed state.

For example, if	you wanted to check that line lengths were always 80
characters or less, you	could run the hypothetical ``cklinlen''
command	at diff	time, using
	diff_command = "cklinlen $in &&	fcomp -w -s $orig $in -o $out";
Checking other coding standards	are also possible using	the same basic
method.

------------------------------

Subject: 4.4.  How do I	get dates printed before and after build
	commands?

Just as	the diff_command file of the project configuration file	can be
extended, so can the build_command field.
	build_command =	"set +e; date; cook ...; x=$?; date; exit $x";
You need to be careful about the -e flag, because Aegis	invokes	the
shell to run the commands with the -e option, to abort after the first
error.

You may	want to	upgrade	to Aegis 3.0.  In this version,	the times are
automatically printed as part of the verbose commencement and
completion messages.

------------------------------

Subject: 4.5.  How do I	stop Aegis automatically merging?

The merging behavior is	controlled by the ``diff_preference'' field of
the user configuration file.  See aeuconf(5) for more information.
There are also three command line options to the aed(1)	command	which
can override the preferences, see aed(1) for more information.

To stop	the automatic merging, add the line
	diff_preference	= no_merge;
to the .aegisrc	file in	your more directory.  To specifically perform
a merge	after that, you	will need to use the ``aed -merge_only''
command.  There	is an ``aem'' alias for	your convenience.

------------------------------

Subject: 4.6.  How do I	modify which developer is assigned to a
	change?

There have been	times when we have one developer working on a change
and, for one reason or another,	we need	assign that change to
different developer before the change is at a point where it can be
integrated.  Is	there a	way to tell Aegis that a new developer has
been assigned to the change so that it would change files permissions
accordingly?  (My thanks to Mark Meuer <markm@endo.com>	for this
question.)

Yes, you need to use the aechown(1) command.  This command may be run
by a project administrator to reassign a change	to a different
developer.  Because chown(2) does not work over	NFS, a new development
directory owned	by the new developer is	created, and the change	files
are copied, before the old development directory is deleted.

------------------------------

Subject: 4.7.  Do I have to type all the configuration examples	in the
	User Guide?

No, you	do not.	 The lib/config.example	directory contains a number of
files with the configuration command from the User Guide ready for
inserting into your project configuration file.

------------------------------

Subject: 4.8.  Is there	a way to recreate a previous baseline?

For example, let's say we have shipped one version to a	customer and
since then made	30 changes to the baseline.  When the customer calls
in with	a failure report that we can't reproduce, how can I easily
rebuild	the baseline from 30 changes ago to help track down the	error?

Yes, it	is possible to recreate	a previous baseline.  You need to
follow these steps:

1. Determine which delta was shipped to	the customer.  This is easiest
if you embed the version supplied by Aegis into	your executables at
build time.

2. Create a change a change (you want to fix the bug, right?)  and
start developing it.

3. Copy	all of the project files into the change, using	the delta
number determined in step 1.  Use these	commands:
	aecd
	aecp . -delta N
where N	is the delta number from the first step.  Files	created	since
the delta will be copied into your change as empty files, leave	them
alone for a while.

Note that you need Aegis 2.3 for directory copying to work correctly.
Earlier	versions will need to use
	aecd
	aecp `aegis -list project_files	-terse`	-delta N
Note the backward quotes.  The above can be abbreviated, its just long
so you can see what it is doing.

4. Build the change as normal.	This will completely rebuild the
version	sent to	the customer.  Note that a number of things are	beyond
Aegis' scope, like operating system updates and	compiler updates.
These can have an effect in accurately reproducing what	was sent to
the customer.

5. Find	the bug	and fix	it, as you would normally do.

5. Merge the change.  This will	bring the files	up to the most recent
version, and merge the bug fix with the	current	version.

6. You can now uncopy all of the files which are unchanged.  Aegis
provides a fast	way to do this
	aecpu -unchanged
This command behaves like aecpu, but it	goes hunting for files which
are the	same between the baseline and the development directory.  Note
that you must do this step after the merge.

------------------------------

Subject: 4.9.  How do I	stop it	using the pager?

Aegis automatically redirects the output of listing and	help into the
pager program described	in the $PAGER environment variable, or more if
not set.  This is only done if aegis is	running	in the foreground and
the output is a	terminal.

The simplest way to stop the use of the	pager is to pipe the output
through	cat.  A	more elegant method is to use the -No_Pager option.

If you want to permanently disable the pager, set the following	line
in your	.aegisrc file:
	pager_preference = never;
If you want to use the pager now, you will need	to use the -PAGer
option.

------------------------------

Subject: 4.10.	Why does develop end complain about builds?

Why does aede complain that "this change must successfully complete an
'aegis -Build' before it can end development" but I have just done a
successful build?

There are two possibilities: time stamps and architectures.

------------------------------

Subject: 4.10.1.  Build	Time Stamps

Aegis tracks time stamps on files and builds, etc, to determine	when
files are out of date.	If time	clocks on various networked machines
disagree, it is	possible for Aegis to conclude that a file or files
are logically out of date.

This problem is	mentioned in the User Guide.  Essentially, you need to
install	NTP or XNTP.  If you can't do that, run	rdate(1) on your
client machines	from cron, to sync their clocks	with the file server's
clock.

------------------------------

Subject: 4.10.2.  Build	Architectures

The ``aede'' can also complain about builds when you have changed the
architecture field of the project configuration	file, but have not yet
updated	the change's attributes	to match.  This	can also happen	when a
separate change	updates	the architecture field,	and all	existing
changes	suddenly get this mystery error.

It happens because the default architecture is "unspecified" in	the
change attributes (use ``aeca -l'' to take a look).  When the project
configuration file changes, the	required architecture, according to
the change's attributes, is still "unspecified".  To fix, use ``aeca
-e'' and edit the change's attributes to match the architecture	names
in the project configuration file.

You may	wish to	upgrade	to version 3.0,	which checks for this, and
prints a suitable error	message, with a	suggestion to edit either the
project	configuration file or the change attributes.

------------------------------

Subject: 5.  Internationalization

This section discusses a number	of issues surrounding
internationalization, and the effect it	has has	upon Aegis and its
error messages.

------------------------------

Subject: 5.1.  Say What?

Internationalization is	the process of modifying code so that it may
produce	messages in the	native language	of the user.  A	data file is
supplied for each supported language, containing the strings to	be
substituted for	error messages and other text produces by a program.

------------------------------

Subject: 5.2.  So why are the error messages So	Bad, now?

There is a set of default error	messages in the	code itself.  These
error messages are used	if the localization file cannot	be found, or
if the message is absent from the localization file for	some reason.
These messages tend to be in the ``programmer cryptic''	language, and
the English localization has probably not been installed correctly.
The English localization *needs* to be installed.

There is also a	small, slight, tiny (cough) possibility	that the
necessary code changes have introduced bugs into some error reporting.
(And we	need bugs there	like we	need a third arm pit.)	Please report
any problems immediately to the	author.

------------------------------

Subject: 5.3.  What controls which language is used?

There are a range of environment variables, depending on your
operating system.  The most common is the LANG environment variable.
The default is ``en'' (for English) if nothing is specified.

------------------------------

Subject: 5.4.  What localizations are available?

Only English is	available at this writing.

More may become	available if there are any generous bilingual Aegis
users out there, who want to provide a localization file in another
language.

------------------------------

Subject: 5.5.  So can I	change the text	of error messages?

Yes, you can, but it is	not advised.  Seriously.  (I'm going to	regret
admitting this,	so I'm not going to tell you how.)  If you have
suggestions for	improving error	messages, please email them to the
author.

------------------------------

Subject: 6.  Branches

This section discusses a number	of issued surrounding branching.

------------------------------

Subject: 6.1.  What is a Branch?

Aegis treats branches as ``big changes''.  This	allows much of Aegis'
development model be be	applied	unchanged, but still allow the
development of projects	to be broken down into fine grained pieces, or
aggregated into	large ``release	sized''	chunks.

------------------------------

Subject: 6.2.  What is an Anabranch?

Aegis' branches	can end.  This is a consequence	of treating branches
as ``big changes''.  Logical places to end branches are	times like
when a release of the software is made.	 The geographic	term for a
stream which breaks off	and rejoins downstream is an anabranch.

Because	branches can end, combined with	the fact that branches are
``big changes'', this means that you use ``aede'' to end development
of the branch.	After that, it is just like any	other change on	its
parent branch.

------------------------------

Subject: 6.3.  Do branches have	to end?

No.  You are not required to end development of	a branch, just as you
are not	required to end	development of a change.  In particular, the
project	trunk is an unnumbered branch which never ends.	 How you
manage your project is up to you.

------------------------------

Subject: 6.4.  Why are branches	called projects?

In order for the branches to be	``big changes'', there are times when
you will refer to the branch as	a change to its	parent project.	 In
order for branches to have changes, there are times when you will
refer to them as a project.

The conversion between the two is intended to be simple.  When you
need to	refer to a branch in its project role, join the	branch's
parent project name to the branch's number with	a dot; e.g. ``-p
aegis.1.2''.  When you need to refer to	a branch in its	change role,
separate the branch's project name from	the branch's number at the
last dot; e.g. ``-p aegis.1 -c 2''.

------------------------------

Subject: 6.5.  Why must	aed be used when integrating a branch?

Because	branches are ``big changes'' and follow	all of the things a
change must do,	including aed.	The only time a	branch is writable is
at integration time for	a change on that branch.  Thus,	the aed	for
the branch is done between aeib	and aeipass.  The trunk	doesn't
require	it, because you	never say aede to the trunk.

------------------------------

Subject: 6.6.  How come	the branch baseline is incomplete?

The branch baseline is the development directory for the ``big
change'' represented by	the branch.  Just as a developers development
directory only contains	the things being worked	on, and	their
implications, so does the branch baseline.

This means that	wherever you specify a search path (-I,	VPATH, etc) to
look first in your development directory and then in the baseline, it
must also look in each of the branch's ancestors' baselines.  Aegis
provides a ``$search_path'' substitution telling you where to search;
this is	usually	used in	the ``build_command'' field of the project
config file.

The ``aefind'' command may also	be used	to perform actions similar to
use usual Unix find(1),	but across the Aegis search path.

------------------------------

End of aegis.4.faq Digest
***************************
