Geometric Types

Geometric types represent two-dimensional spatial objects. The most fundamental type, the point, forms the basis for all of the other types.

Tabla 3-17. Postgres Geometric Types

Geometric TypeStorageRepresentationDescription
point16 bytes(x,y)Point in space
line32 bytes((x1,y1),(x2,y2))Infinite line
lseg32 bytes((x1,y1),(x2,y2))Finite line segment
box32 bytes((x1,y1),(x2,y2))Rectangular box
path4+32n bytes((x1,y1),...)Closed path (similar to polygon)
path4+32n bytes[(x1,y1),...]Open path
polygon4+32n bytes((x1,y1),...)Polygon (similar to closed path)
circle24 bytes<(x,y),r>Circle (center and radius)

A rich set of functions and operators is available to perform various geometric operations such as scaling, translation, rotation, and determining intersections.

Point

Points are the fundamental two-dimensional building block for geometric types.

point is specified using the following syntax:

( x , y )
  x , y
where
    x is the x-axis coordinate as a floating point number
    y is the y-axis coordinate as a floating point number
     

Line Segment

Line segments (lseg) are represented by pairs of points.

lseg is specified using the following syntax:

( ( x1 , y1 ) , ( x2 , y2 ) )
  ( x1 , y1 ) , ( x2 , y2 )  
    x1 , y1   ,   x2 , y2    
where
    (x1,y1) and (x2,y2) are the endpoints of the segment
     

Box

Boxes are represented by pairs of points which are opposite corners of the box.

box is specified using the following syntax:

( ( x1 , y1 ) , ( x2 , y2 ) )
  ( x1 , y1 ) , ( x2 , y2 )  
    x1 , y1   ,   x2 , y2    
where
    (x1,y1) and (x2,y2) are opposite corners
     
Boxes are output using the first syntax. The corners are reordered on input to store the lower left corner first and the upper right corner last. Other corners of the box can be entered, but the lower left and upper right corners are determined from the input and stored.

Path

Paths are represented by connected sets of points. Paths can be "open", where the first and last points in the set are not connected, and "closed", where the first and last point are connected. Functions popen(p) and pclose(p) are supplied to force a path to be open or closed, and functions isopen(p) and isclosed(p) are supplied to select either type in a query.

path is specified using the following syntax:

( ( x1 , y1 ) , ... , ( xn , yn ) )
[ ( x1 , y1 ) , ... , ( xn , yn ) ]
  ( x1 , y1 ) , ... , ( xn , yn )  
  ( x1 , y1   , ... ,   xn , yn )  
    x1 , y1   , ... ,   xn , yn    
where
    (x1,y1),...,(xn,yn) are points 1 through n
    a leading "[" indicates an open path
    a leading "(" indicates a closed path
     
Paths are output using the first syntax. Note that Postgres versions prior to v6.1 used a format for paths which had a single leading parenthesis, a "closed" flag, an integer count of the number of points, then the list of points followed by a closing parenthesis. The built-in function upgradepath is supplied to convert paths dumped and reloaded from pre-v6.1 databases.

Polygon

Polygons are represented by sets of points. Polygons should probably be considered equivalent to closed paths, but are stored differently and have their own set of support routines.

polygon is specified using the following syntax:

( ( x1 , y1 ) , ... , ( xn , yn ) )
  ( x1 , y1 ) , ... , ( xn , yn )  
  ( x1 , y1   , ... ,   xn , yn )  
    x1 , y1   , ... ,   xn , yn    
where
    (x1,y1),...,(xn,yn) are points 1 through n
     
Polygons are output using the first syntax. Note that Postgres versions prior to v6.1 used a format for polygons which had a single leading parenthesis, the list of x-axis coordinates, the list of y-axis coordinates, followed by a closing parenthesis. The built-in function upgradepoly is supplied to convert polygons dumped and reloaded from pre-v6.1 databases.

Circle

Circles are represented by a center point and a radius.

circle is specified using the following syntax:

< ( x , y ) , r >
( ( x , y ) , r )
  ( x , y ) , r  
    x , y   , r  
where
    (x,y) is the center of the circle
    r is the radius of the circle
     
Circles are output using the first syntax.