Apéndice AI. Archivo de configuración /var/www/phpldapadmin/config.php

<?php

/*
 *                  The phpLDAPadmin config file
 *
 *   This is where you customize phpLDAPadmin. The most important
 *   part is immediately below: The "LDAP Servers" section.
 *   You must specify at least one LDAP server there. You may add
 *   as many as you like. You can also specify your language, and
 *   many other options.
 *
 */

// Your LDAP servers
$i=0;
$servers = array();
$servers[$i]['name'] = 'TODOSCSI'; 
            /* A convenient name that will appear in
               the tree viewer and throughout phpLDAPadmin to
               identify this LDAP server to users. */

$servers[$i]['host'] = 'gsr.pt';
            /* Examples: 
                   'ldap.example.com', 
                   'ldaps://ldap.example.com/',
                   'ldapi://%2fusr%local%2fvar%2frun%2fldapi'
                    (Unix socket at /usr/local/var/run/ldap)
                    Note: Leave 'host' blank to make phpLDAPadmin
                    ignore this server. */

$servers[$i]['base'] = 'dc=gsr,dc=pt';
            /* The base DN of your LDAP server. Leave this 
               blank to have phpLDAPadmin auto-detect it for you. */

$servers[$i]['port'] = 389;
            /* The port your LDAP server listens on
               (no quotes). 389 is standard. */

$servers[$i]['auth_type'] = 'session';
            /*  Three options for auth_type:
                     1. 'cookie': you will login via a web form, 
                         and a client-side cookie will store your 
                         login dn and password. 
                     2. 'session': same as cookie but your login dn
                         and password are stored on the web server in
                         a session variable.
                     3. 'config': specify your login dn and password 
                         here in this config file. No login will be
                         required to use phpLDAPadmin for this server. 
                         Choose wisely to protect your authentication 
                         information appropriately for your situation. */

$servers[$i]['login_dn'] = '';
            /* The DN of the user for phpLDAPadmin to bind with. 
               For anonymous binds or 'cookie' or 'session' auth_types, 
               leave the login_dn and login_pass blank. If you specify a
               login_attr in conjunction with a cookie or session auth_type,
               then you can also specify the login_dn/login_pass here for
               searching the directory for users (ie, if your LDAP server 
               does not allow anonymous binds. */

$servers[$i]['login_pass'] = '';
            /* Your LDAP password. If you specified an empty login_dn above,
               this MUST also be blank. */

$servers[$i]['tls'] = false;
            /* Use TLS (Transport Layer Security) to connect to the LDAP 
               server. */

$servers[$i]['low_bandwidth'] = false;
            /* If the link between your web server and this LDAP server is
               slow, it is recommended that you set 'low_bandwidth' to true.
               This will cause phpLDAPadmin to forego some "fancy" features
               to conserve bandwidth. */

$servers[$i]['default_hash'] = 'crypt';
            /* Default password hashing algorithm.
               One of md5, ssha, sha, md5crpyt, smd5, blowfish, crypt or 
               leave blank for now default algorithm. */

$servers[$i]['login_attr'] = 'dn';
            /* If you specified 'cookie' or 'session' as the auth_type above, 
               you can optionally specify here an attribute 
               to use when logging in. If you enter 'uid'
               and login as 'dsmith', phpLDAPadmin will 
               search for (uid=dsmith) and log in as that user. Leave
               blank or specify 'dn' to use full DN for 
               logging in. Note also that if your LDAP server requires
               you to login to perform searches, you can enter
               the DN to use when searching in 'login_dn' and 
               'login_pass' above. */

$servers[$i]['login_class'] = '';
            /* If 'login_attr' is used above such that phpLDAPadmin will 
               search for your DN at login, you may restrict the search to 
               a specific objectClass.  E.g., set this to 'posixAccount' or 
               'inetOrgPerson', depending upon your setup. */

$servers[$i]['read_only'] = false;
            /* Specify true If you want phpLDAPadmin to not
               display or permit any modification to the 
               LDAP server. */

$servers[$i]['show_create'] = true;
            /* Specify false if you do not want phpLDAPadmin to 
               draw the 'Create new' links in the tree viewer. */

$servers[$i]['enable_auto_uid_numbers'] = true;  
            /* This feature allows phpLDAPadmin to 
               automatically determine the next
               available uidNumber for a new entry. */

$servers[$i]['auto_uid_number_mechanism'] = 'search'; 
            /* The mechanism to use when finding the next available uidNumber.
               Two possible values: 'uidpool' or 'search'. The 'uidpool'
               mechanism uses an existing uidPool entry in your LDAP server
               to blindly lookup the next available uidNumber. The 'search' 
               mechanism searches for entries with a uidNumber value and finds
               the first available uidNumber (slower). */

$servers[$i]['auto_uid_number_search_base'] = 'ou=people,dc=gsr,dc=pt'; 
            /* The DN of the search base when the 'search'
               mechanism is used above. */

$servers[$i]['auto_uid_number_min'] = 10000;
            /* The minimum number to use when searching for the next
               available UID number (only when 'search' is used for 
               auto_uid_number_mechanism' */

$servers[$i]['auto_uid_number_uid_pool_dn'] = 'cn=uidpool,dc=gsr,dc=pt'; 
                                            /* The DN of the uidPool entry when 'uidpool'
                                               mechanism is used above. */

$servers[$i]['auto_uid_number_search_dn'] = '';
           /* If you set this, then phpldapadmin will bind to LDAP with this user
              ID when searching for the uidnumber. The idea is, this user id would
              have full (readonly) access to uidnumber in your ldap directory (the
              logged in user may not), so that you can be guaranteed to get a unique
              uidnumber for your directory. */

$servers[$i]['auto_uid_number_search_dn_pass'] = '';
           /* The password for the dn above */


// If you want to configure additional LDAP servers, do so below.
$i++;
$servers[$i]['name'] = 'Another server';
$servers[$i]['host'] = '';
$servers[$i]['base'] = 'dc=example,dc=com';
$servers[$i]['port'] = 389;
$servers[$i]['auth_type'] = 'config';
$servers[$i]['login_dn'] = '';
$servers[$i]['login_pass'] = '';
$servers[$i]['tls'] = false;
$servers[$i]['low_bandwidth'] = false;
$servers[$i]['default_hash'] = 'crypt';
$servers[$i]['login_attr'] = 'dn';
$servers[$i]['login_class'] = '';
$servers[$i]['read_only'] = false;
$servers[$i]['show_create'] = true;
$servers[$i]['enable_auto_uid_numbers'] = false;
$servers[$i]['auto_uid_number_mechanism'] = 'search'; 
$servers[$i]['auto_uid_number_search_base'] = 'ou=People,dc=example,dc=com'; 
$servers[$i]['auto_uid_number_min'] = 1000;
$servers[$i]['auto_uid_number_uid_pool_dn'] = 'cn=uidPool,dc=example,dc=com';

// If you want to configure more LDAP servers, copy and paste the above
// (including the "$i++;")

// The temporary storage directory where we will put jpegPhoto data
// This directory must be readable and writable by your web server 
$jpeg_temp_dir = "/tmp";       // Example for Unix systems
//$jpeg_temp_dir = "c:\\temp"; // Example for Windows systems

/**                            **/
/**   Appearance and Behavior  **/
/**                            **/

// Aliases and Referrrals
//
// Similar to ldapsearh's -a option, the following options allow you to
// configure how phpLDAPadmin will treat aliases and referrals in the
// LDAP tree. For the following four settings, avaialable options include:
//
//  LDAP_DEREF_NEVER     - aliases are never dereferenced (eg, the contents
//                         of the alias itself are shown and not the
//                         referenced entry).
//  LDAP_DEREF_SEARCHING - aliases should be dereferenced during the search
//                         but not when locating the base object of the
//                         search.
//  LDAP_DEREF_FINDING   - aliases should be dereferenced when locating the
//                         base object but not during the search.
//  LDAP_DEREF_ALWAYS    - aliases should be dereferenced always (eg, the
//                         contents of the referenced entry is shown and
//                         not the aliasing entry)

// How to handle references and aliases in the search form. See above
// for options.
$search_deref = LDAP_DEREF_ALWAYS; 

// How to handle references and aliases in the tree viewer. See above
// for options.
$tree_deref = LDAP_DEREF_NEVER;

// How to handle references and aliases for exports. See above
// for options.
$export_deref = LDAP_DEREF_NEVER;

// How to handle references and aliases when viewing entries. See
// above for options.
$view_deref = LDAP_DEREF_NEVER;


// The language setting. If you set this to 'auto', phpLDAPadmin will
// attempt to determine your language automatically. Otherwise, available
// lanaguages are: 'ct', 'de', 'en', 'es', 'fr', 'it', 'nl', and 'ru'
// Localization is not complete yet, but most strings have been translated.
// Please help by writing language files. See lang/en.php for an example.
$language = 'auto';

// Set to true if you want to draw a checkbox next to each entry in the
// tree viewer to be able to delete multiple entries at once
$enable_mass_delete = false;

// Set to true if you want LDAP data to be displayed read-only
// (without input fields) when a user logs in to a server anonymously
$anonymous_bind_implies_read_only = true;

// Set to true if you want phpLDAPadmin to redirect anonymous 
// users to a search form with no tree viewer on the left after
// logging in.
$anonymous_bind_redirect_no_tree = false;

// If you used auth_type 'form' in the servers list, you can adjust how
// long the cookie will last (default is 0 seconds, which expires when you
// close the browser)
$cookie_time = 0; // seconds

// How many pixels wide do you want your left frame view (for the
// tree browser)
$tree_width = 320; // pixels

// How long to keep jpegPhoto temporary files in the jpeg_temp_dir
// directory (in seconds)
$jpeg_tmp_keep_time = 120; // seconds

// Would you like to see helpful hint text occacsionally?
$show_hints = true; // set to false to disable hints

// When using the search page, limit result size to this many entries
$search_result_size_limit = 50;

// If true, display password values as ******. Otherwise display them
// in clear-text If you use clear-text passwords, it is recommended to
// set this to true. If you use hashed passwords (sha, md5, crypt, etc),
// hashed passwords are already obfuscated by 
// the hashing algorithm and this should probably be left false.
$obfuscate_password_display = false;

/**                           **/
/** Simple Search Form Config **/
/**                           **/

// Which attributes to include in the drop-down menu of the simple
// search form (comma-separated) Change this to suit your needs for
// convenient searching. Be sure to change the corresponding 
// list below ($search_attributes_display)
$search_attributes = "uid, cn, gidNumber, objectClass, telephoneNumber, 
                      mail, street";

// This list corresponds to the list directly above. If you want to
// present more readable names for your search attributes, do so here.
// Both lists must have the same number of entries.
$search_attributes_display = "User Name, Common Name, Group ID,
                              Object Class, Phone Number, Email, Address";

// The list of attributes to display in each search result entry. 
// Note that you can add * to the list to display all attributes
$search_result_attributes = "cn, sn, uid, postalAddress, telephoneNumber"; 

// You can re-arrange the order of the search criteria on the simple
// search form by modifying this array
// You cannot however change the names of the criteria. Criteria names
// will be translated at run-time.
$search_criteria_options = array( "equals", "starts with", "contains",
                                  "ends with", "sounds like" );

// If you want certain attributes to be editable as multi-line,
// include them in this list
// A multi-line textarea will be drawn instead of a single-line text field
$multi_line_attributes = array( "postalAddress", "homePostalAddress",
                                "personalSignature" );

// A list of syntax OIDs which support multi-line attribute values:
$multi_line_syntax_oids = array( 
                            // octet string syntax OID:
                            "1.3.6.1.4.1.1466.115.121.1.40", 
                            // postal address syntax OID:
                            "1.3.6.1.4.1.1466.115.121.1.41"  );

/**                                         **/
/** User-friendly attribute translation     **/
/**                                         **/

$friendly_attrs = array();

// Use this array to map attribute names to user friendly names.
// For example, if you don't want to see
// "facsimileTelephoneNumber" but rather "Fax".

$friendly_attrs[ 'facsimileTelephoneNumber' ] =         'Fax';
$friendly_attrs[ 'telephoneNumber' ]  =                 'Phone';

/**                                         **/
/** Hidden attributes                       **/
/**                                         **/

// You may want to hide certain attributes from being displayed in
// the editor screen
// Do this by adding the desired attributes to this list
// (and uncomment it). This only affects the editor screen.
// Attributes will still be visible in the schema
// browser and elsewhere. An example is provided below:

//$hidden_attrs = array( 'jpegPhoto', 'objectClass' );

/**                                         **/
/** Read-only attributes                    **/
/**                                         **/

// You may want to phpLDAPadmin to display certain attributes as
// read only, meaning that users will not be presented a form
// for modifying those attributes, and they
// will not be allowed to be modified on the
// "back-end" either. You may configure this list here:

//$read_only_attrs = array( 'objectClass' );

// An example of how to specify multiple read-only attributes:
// $read_only_attrs = array( 'jpegPhoto', 'objectClass',
//                           'someAttribute' );

/**                                         **/
/** Predefined Queries (canned views)       **/
/**                                         **/

// To make searching easier, you may setup predefined queries
// below (activate the lines by removing "//")
//$q=0;
//$queries = array();
//$queries[$q]['name'] = 'Samba Users';
//          /* The name that will appear in the simple search form */
//
//$queries[$q]['server'] = '0';
//          /* The ldap server to query, must be defined in the
//             $servers list above */
//
//$queries[$q]['base'] = 'dc=example,dc=com';
//          /* The base to search on */
//
//$queries[$q]['scope'] = 'sub';
//          /* The search scope (sub, base, one) */
//
//$queries[$q]['filter'] = '(&(objectclass=sambaAccount)
//                            (objectClass=posixAcount))'; 
//          /* The LDAP filter to use */
//$queries[$q]['attributes'] = 'uid, smbHome, uidNumber';
//          /* The attributes to return */

// Add more pre-defined queries by copying the text below
//$q++;
//$queries[$q]['name'] = 'Organizations';
//$queries[$q]['server'] = '0';
//$queries[$q]['base'] = 'dc=example,dc=com';
//$queries[$q]['scope'] = 'sub';
//$queries[$q]['filter'] = '(|(objeCtclass=organization)
//                             (objectClass=organizationalUnit))';
//$queries[$q]['attributes'] = 'ou, o';

//$q++;
//$queries[$q]['name'] = 'Last name starts with S';
//$queries[$q]['server'] = '0';
//$queries[$q]['base'] = 'dc=example,dc=com';
//$queries[$q]['scope'] = 'sub';
//$queries[$q]['filter'] = '(sn=s*)';
//$queries[$q]['attributes'] = '*';

?>