bgpd - a BGPv4, BGPv4+, BGPv4- routing engine for use with
       Zebra


SYNOPSIS

       bgpd [ -dhpPv ] [ -f config-file ] [ -p bgp-port-number  ]
       [ --bgp_port=port-number ] [ -P vty-port-number ]


DESCBGPTION

       bgpd  is  a  routing  component  that works with the zebra
       routing engine.


OPTIONS

       -d, --daemon
              Runs in daemon mode, forking and exiting from  tty.

       -f, --config-file config-file
              Specifies  the  config  file to use for startup. If
              not specified this option will  likely  default  to
              /usr/local/etc/bgpd.conf.

       -h, --help
              A brief message.

       -p, --bgp_port=port
              Set the port that bgpd will listen to for bgp data.

       -P, --vty_port port-number
              Specify the port that the bgpd VTY will listen  on.
              This  defaults  to  2605, as specified in /etc/ser­
              vices.

       -r, --retain
              When the program terminates, retain routes added by
              bgpd.

       -v, --version
              Print the version and exit.


COMMANDS

        router zebra  -- (Move routes into kernel table)
        router bgp [AS-NUMBER]


        network [NETWORK] area [BGP-AREA-ID]
        no network [NETWORK]

        aggregate-address [NETWORK]

        neighbor [PEER-IP-ADDRESS] remote-as [REMOTE-AS]
        neighbor [PEER-IP-ADDRESS] version [ 4 | 4+ | 4- ]

        neighbor [PEER-IP-ADDRESS] description
        no neighbor [PEER-IP-ADDRESS] description

        neighbor [PEER-IP-ADDRESS] route-map [in | out]
        neighbor [PEER-IP-ADDRESS] distribute-list [in | out]
        neighbor [PEER-IP-ADDRESS] next-hop-self
        neighbor [PEER-IP-ADDRESS] weight [WEIGHT]
        neighbor [PEER-IP-ADDRESS] default-originate
        neighbor [PEER-IP-ADDRESS] ebgp-multihop

        neighbor [PEER-IP-ADDRESS] shutdown
        no neighbor [PEER-IP-ADDRESS] shutdown

        clear ip bgp [PEER-IP-ADDRESS]

        show ip bgp [NETWORK]
        show ip bgp reg-exp [AS-REGEXP]
        show ip bgp summary
        show ip bgp neighbor [PEER-IP-ADDRESS]
        show ip bgp route

        show debug

        debug bgp
        debug event
        debug update
        debug keepalive

        no debug event
        no debug update
        no debug keepalive


FILES

       /usr/local/sbin/bgpd
              The default location of the bgpd binary.

       /usr/local/etc/bgpd.conf
              The default location of the bgpd config file.

              If the bgpd process is config'd to output logs to a
              file, then you will find this file in the directory
              where you started bgpd.


WARNING

       This man page is intended as a quick reference for command
       line options, and for config file commands. The definitive
       document is the Info file zebra.


DIAGNOSTICS

       The  bgpd process may log to standard output, to a VTY, to
       a log file, or through syslog to  the  system  logs.  bgpd
       supports many debugging options, see the Info file, or the
       source for details.


SEE ALSO

       References to other related man pages:

       ripd(8),   ripngd(8),   ospfd(8),   ospf6d(8),   zebra(8),
       vtysh(1)


BUGS

       bgpd  eats  bugs  for  breakfast. If you have food for the
       maintainers try <bug-zebra@gnu.org>


AUTHOR[S]

       See <www.zebra.org>, or the Info file for an accurate list
       of authors.


Man(1) output converted with man2html