[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
GBlist: Green Crack Fillers
Thanks to: Chris Koehn, Glenn Minch (see attached), Jim Hardwick, John
Salmen, Frazer Dougherty, Mike O'Brien, Chris Mathis and Arnie for your
astute reflections on using either the wet or dry method for crack
infill. My apologies if I inadvertently missed someone. However further to
my original posting of the question, I am still searching for the
most environmentally-sound, non-HCFC foam that I would like to try for
all those areas where access with backer rod is not possible, but room to
insert a straw is adequate. Gems of wisdom still appreciated.
_______________________________________________________
Jorg Ostrowski, M. Arch. A.S. (MIT), B. Arch. (Toronto), Ecotect
- in full-time professional practice since 1976 (Straw Bale since 1978),
environmental/architectural design, ecological planning, consulting
on sustainable buildings/communities. Lectures, seminars, workshops.
3 demonstration projects in Canada, +80,000 visitors
- living a conserver lifestyle & working in a sustainable home and office
ACE, ARE, ACT, ASH-Incs., Phone: (403) 239-1882, Fax: (403) 547-2671
Web Site [under construction]: http://www.ucalgary.ca/~jdo/ecotecture.htm
______________________________________________________
______________________________________________________________________
This greenbuilding dialogue is sponsored by CREST <www.crest.org>
Environmental Building News <www.ebuild.com> and Oikos <www.oikos.com>
For instructions send e-mail to greenbuilding-request@crest.org.
______________________________________________________________________
Follow-Ups:
References: